Silica is a reinforcing filler which is known for its ability to improve wet/snow grip and rolling resistance in tyres. However, incorporating Silica in high quantities impairs other significant features like physical properties and processing behaviour of the compounds. In this study, the focus was on balancing rolling resistance and grip properties while attempting to nullify the negative effects of Silica, by arriving at an optimum ratio of combination of Carbon Black and Silica. Three different compounds were prepared – COMP_1 had CB:Silica in 2:1 ratio, whereas COMP_2 and COMP_3 had CB:Silica in the ratios 1:1 and 1:2 respectively. The impact of their dosage on various properties were investigated. Taking into consideration abrasion loss and grip properties, 1:1 ratio was deemed to possess the optimized ratio.
PonnammaDMariaHJChandraAK, et al.Rubber nanocomposites: latest trends and concepts. In: VisakhPMThomasSChandraAK, et al. (eds) Adv Elastomers. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013, pp. 69–107. (Advanced Structured Materials; vol. 12). Available from:https://link.springer.com/10.1007/978-3-642-20928-4_3[cited 2020 Oct 20].
KumarMSSRajuNMSSampathPS, et al.Effects of nanomaterials on polymer composites - an expatiate view. Rev Adv Mater Science2014; 38(1): 40–54.
4.
Mora-BarrantesIIbarraLRodríguezA, et al.Elastomer composites based on improved fumed silica and carbon black: advantages of mixed reinforcing systems. J Mater Chem2011; 21(43): 17526.
5.
ZafarmehrabianRGangaliSTGhoreishyMHR, et al.The effects of silica/carbon black ratio on the dynamic properties of the tread compounds in truck tires. E-journal Chem2012; 9(3): 1102–1112.
6.
BukitNGintingEMSidebangE, et al.Mechanical properties of natural rubber compounds with oil palm boiler ash and carbon black as a filler. J Phys Conf Ser2020; 1428(1): 012020.
7.
FaridaEBukitNGintingEM, et al.The effect of carbon black composition in natural rubber compound. Case Stud Therm Eng2019; 16: 100566.
8.
WengPTangZGuoB. Solving “magic triangle” of tread rubber composites with phosphonium-modified petroleum resin. Polymer2020; 190: 122244.
9.
EjsmontJOwczarzakW. Engineering method of tire rolling resistance evaluation. Measurement2019; 145: 144–149.
10.
HermangeCOgerGLe ChenadecY, et al.In-depth analysis of hydroplaning phenomenon accounting for tire wear on smooth ground. J Fluids Structures2022; 111: 103555.
11.
D’ApuzzoMEvangelistiANicolosiV. An exploratory step for a general unified approach to labelling of road surface and tyre wet friction. Accid Anal Prev2020; 138: 105462.
12.
Al-HartomyOAAl-GhamdiAAFarha Al SaidSA, et al.Influence of carbon black/silica ratio on the physical and mechanical properties of composites based on epoxidized natural rubber. J Compos Mater2016; 50(3): 377–386.
BrinkeJWTDebnathSCReuvekampLAEM, et al.Mechanistic aspects of the role of coupling agents in silica–rubber composites. Composites Sci Technol2003; 63(8): 1165–1174.
15.
HewittN. Compounding Precipitated Silica in Elastomers. Norwich, NY, USA: William Andrew Pub, 2007. (Plastics design library).
16.
XuTJiaZLuoY, et al.Interfacial interaction between the epoxidized natural rubber and silica in natural rubber/silica composites. Appl Surf Sci2015; 328: 306–313.
17.
SuryaIIsmailHAzuraAR. The comparison of alkanolamide and silane coupling agent on the properties of silica-filled natural rubber (SMR-L) compounds. Polym Test2014; 40: 24–32.
18.
SaleemRMNatchimuthuN. Evaluation of performance properties of poly(styrene‐co‐butadiene) rubber reinforced with N, N‐dimethylacetamide/lithium chloride treated precipitated silica. J Appl Polym Sci2022; 139(27). Available from:https://onlinelibrary.wiley.com/doi/10.1002/app.52498
19.
VeigaVDRossignolTMCrespoJ da S, et al.Tire tread compounds with reduced rolling resistance and improved wet grip: ARTICLE. J Appl Polym Sci2017; 134(39): 45334.
20.
RattanasomNSaowaparkTDeeprasertkulC. Reinforcement of natural rubber with silica/carbon black hybrid filler. Polym Test2007; 26(3): 369–377.
SarkawiSSDierkesWKNoordermeerJWM. The influence of non-rubber constituents on performance of silica reinforced natural rubber compounds. Eur Polym J2013; 49(10): 3199–3209.
23.
KimDYParkJWLeeDY, et al.Correlation between the crosslink characteristics and mechanical properties of natural rubber compound via accelerators and reinforcement. Polymers (Basel)2020; 12.
24.
SaleesungThanisararatReichertDetlefSaalwächterKaySirisinhaChakrit, et al. Correlation of Crosslink Densities Using Solid State NMR and Conventional Techniques in Peroxide-Crosslinked EPDM Rubber. Polymer. Elsevier B.V., 2015, 56, pp. 309–317, https://doi.org/10.1016/j.polymer.2014.10.057.
25.
KasiEJosephrajFXMurugesanAK, et al.Effect of crosslink density on cut and chip resistance of 100% SBR based tire tread compound. Mater Plast2021; 58(1): 34–46.
26.
WangMJ. Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates. Rubber Chem Technol1998; 71(3): 520–589.
