Aiming to reduce the overall energy consumption of PET super-clean technologies, without using hazardous and large amounts of solvents, this work deals with accelerated solvent extraction followed by solid state polymerization (ASE-SSP) as an alternative way to decontaminate recycled PET for direct food contact applications. The main effects of the extraction ASE parameters (temperature, flow rate and pressure) in extraction efficiency of toluene and benzophenone, used as model contaminants, from PET were evaluated using a first-order fractional experimental design. Subsequently, PET chips were submitted to a SSP process to remove residual acetone, used as the extractor solvent, from PET. Extraction yield was quantified by gas chromatography with flame ionization detector (GC-FID). Results showed that the only parameter that affects negatively the decontamination process was an increase in temperature. Moreover, the SSP process helped to remove residual acetone from PET reaching decontamination levels as high as the FDA recommendations for direct food contact packaging.
International Life Sciences Institute, Recycling of plastics for food contact use. Guidelines prepared under the responsibility of the International Life Sciences Institute (ILSI) and European Packaging Material Task Force.International Life Sciences Institute: Brussels (1998).
8.
Food and Drug Administration, Use of Recycled Plastics in Food Packaging: Chemistry Considerations.US Food and Drug Administration, Center for Food Safety and Applied Nutrition: Washington (DC) (2006).
9.
European Food Safety Authority (EFSA), Scientific Opinion on the criteria to be used for safety evaluation of a mechanical recycling process to produce recycled PET intended to be used for manufacture of materials and articles in contact with food. EFSA J 9:2184, Parma (2011).
FranzR., HuberM., and PiringerO., Food Addit. Contam., 11 (1994), 479–496.
12.
FordT., JCI's recycled PET approved for food. Plast. News (Set 1994).
13.
ChristelA., BorerC., and HerspergerT., Method and device for decontaminating polycondensates. WO 01/34688 (2001).
14.
RuleM., Process for removing contaminants from polyesters and controlling polymer molecular weight. US Patent 6103774 (2000).
15.
GhattaA., and HussainA., Method for the reduction of impurities in polyester resins. US Patent 5049647 (1991).
16.
KosiorE., Process for Preparing Food Contact Grade Polyethylene Terephthalate Resin from Waste PET Containers. WO 0121373 (2001).
17.
FriedhelmB., and HeinrichB., Method for processing used PET containers for recycling purposes involves comminution into chips whose subsequent treatment includes mixing with water and soda lye in an autoclave. DE 10032900 (2002).
18.
Erema, PET bottle to bottle. Recycl. News, Linz (2000).
19.
KronesA.G., Krones implements first bottle-to-bottle recycling facility. PETticker (May 2002).
20.
BeechenoK., Recycling and waste management in Brazil: overview report.University of Essex, London, UK (2013).
21.
ManrichS., SantosA.S.F., and AgnelliJ.A.M., Process for decontamination of recycled polyester (PET) flakes. WO 05/121230 (2005).
22.
BrownscombeT.F., ChuahH.H., DiazZ., FongH.L., JuneR.L., FollickK.L., SempleT.C., and TompkinM.R., Process for recycling mixed polymer containing polyethylene terephthalate. US Patent 5554657 (1996).
