Recycled Styrene-Butadiene Rubber (SBR) from ground tire rubber (GTR) was sieved into four granulometric fractions between 125 and 500 microns to determine the effect of particle size on its thermo-mechano-chemical regeneration in an internal batch mixer. Different temperatures (140-180°C) and rotor speeds (40-120 rpm) were imposed with and without the addition of a regeneration aid (aromatic oil). The results show that partial regeneration (lower crosslinking degree) is possible under specific thermo-mechanical conditions, but the addition of the aromatic oil has limited efficiency towards this regeneration.
MacsiniucA., RochetteA., and RodrigueD., Understanding the regeneration of EPDM rubber crumbs from used tires, Progress in Rubber, Plastics and Recycling Technology, 26, (2010) 51–81.
6.
AndersonE., Reclaiming of Vulcanized Rubber. US Patent 4544675, 1985.
7.
AdhikariA., DeD., and MaitiS., Reclamation and recycling of waste rubber, Progress in Polymer Science, 25, (2000) 909–948.
8.
KovalakR.R., and HuntK.L., Process for Devulcanization of Cured Rubbers. US Patent 6548560B1, 2003.
9.
TzoganakisC., Method of Devulcanizing Crosslinked Rubber. ARIPO Patent WO 03/029298 A3, 2003.
10.
IsaievA., YushanovP., KimS., and LevinV., Ultrasonic devulcanization of waste rubbers: Experimentation and modelling, Rheologica Acta, 35, (1996) 616–630.
11.
IsayevA., YushanovS., and ChenJ., Ultrasonic devulcanization of rubber vulcanizates, Journal of Applied Polymer Science, 59, (1996) 815–824.
12.
YunJ., IsayevA., KimS., and TapaleM., Comparative analysis of ultrasonically devulcanized unfilled SBR, NR and EPDM rubbers, Journal of Applied Polymer Science, 88, (2003) 434–441.
13.
MarcM., Devulcanization of Rubber and Other Elastomers. US Patent US2011/0269855A1, 2011.
14.
NovotnyD.S., MarshR.L., MastersF.C., and TallyD.N., Microwave Devulcanization of Rubber. US Patent 4104205, 1978.
Karger-KocsisJ., MeszarosL., and BaranyT., Ground tyre rubber (GTR) in thermoplastics, thermosets and rubbers, Journal of Material Sciences, 47, (2012) 1–38.
17.
BarzegariM., LeducS., KhodabakhshR., and RodrigueD., Rheological and mechanical properties of thermoplastics elastomers (TPE) based on ground rubber and recycled plastics, PPS-2005 America's regional meeting, Quebec (QC), August 14-17, paper S1_3, 2005.
18.
KakouA.C., Production de thermoplastiques élastomères à base de résines recyclées, M.Sc. thesis, Department of chemical engineering, Université Laval, Canada, 2009.
19.
WackH., HintemannD., MichaelH., and BuschnerN., Preparation and properties of swellable thermoplastic elastomer alloys based on elastomeric powder, polypropylene, and superabsorbent polymer, Journal of Applied Polymer Science, 120, (2011) 1290–1296.
20.
RazmjooeiF., NaderG., and BakhshandehG., Preparation of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber, Journal of Applied Polymer Science, 124, (2012) 4864–4873.
21.
AbadchiM.R., AraniA.J., and NazockdastH., Partial replacement of NR by GTR in thermoplastic elastomer based on LLDPE/NR through using reactive blending: Its effects on morphology, rheological, and mechanical properties, Journal of Applied Polymer Science, 115, (2010) 2416–2422.
22.
PospisilJ., HorakZ., KrulisZ., NespurekS., and KurodaS., Degradation and aging of polymer blends: I. Thermomechanical and thermal degradation, Polymer Degradation and Stability, 65, (1999) 405–414.
23.
MohanrajG.T., VikramT., ShanmugharajA.M., KhastgirD., and ChakiT.K., Kinetics of thermal degradation and thermo-oxidative degradation of conductive styrene-butadiene-carbon black composites, Journal of Material Sciences, 41, (2006) 4777–4789.
24.
SiH., ChenT., and ZhangY., Effects of High Shear Stress on the Devulcanization of Ground Tire Rubber in a Twin-Screw Extruder, Journal of Applied Polymer Science, 2012. Online. Available: http://onlinelibrary.wiley.com/doi/10.1002/app.38170/abstract, Visited 5-05-2012
25.
ZhangX., LuC., and LiangM., Properties of natural rubber vulcanizates containing mechanochemically devulcanized ground tire rubber, Journal of Polymer Research, 16, (2009) 411–419.
26.
MacsiniucA., RochetteA., and RodrigueD., Effect of EPDM particles size on its thermo-mechanical regeneration, Progress in Rubber, Plastics and Recycling Technology, 28, (2012) 43–62.
27.
YehiaA.A., IsmailM.N., HenfyY.A., Abdel-Bary, and MullM.A., Mechanochemical reclamation of waste rubber powder and its effect on the performance of NR and SBR vulcanizates, Journal of Elastomers and Plastics, 36, (2004) 109–123.
28.
ASTM International, D6814-02, Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber based on Crosslink Density, 2002.
