Abstract
Waste resorcinol-formaldehyde-latex (RFL) dip solid was collected from the suction chamber of a typical tyre industry dip unit. The physico-chemical characterization of the material was carried out, along with a fresh RFL dip solid obtained by drying a fresh dip solution. The effect of the waste material was studied in a styrene butadiene rubber (SBR) based compound in both gum and filled state. The waste material was treated with boiled water and dilute hydrochloric acid and the effect of the treated material was further studied in the SBR based filled compound. The filler dispersion, polymer-filler interaction and dynamic mechanical properties was also studied.
Get full access to this article
View all access options for this article.
References
1.
Agrawal S.
,
Mandot S.
,
Bandyopadhyay S.
,
Mukhopadhyay R.
,
Dasgupta M
,
De P. P.
, and
Deuri A. S.
, Prog. Rubber Plas. Recycl. Technol. , 20 (2004 ), 229 .
2.
Moult H.
, in “Handbook of Adhesives” , 2nd edition,
Skeist I.
(ed.), p. 495 , Rheinhold Publ. Corp. , (1962 ).
3.
Wilson M. W.
, TAPPI , 43 (1960 ), 129 .
4.
Dlugosz
, 5th International Conference on Electromicroscopy ,
Bresse S. S.
(ed.), vol. 1 , (1962 ).
5.
van der Meer S.
, Rubber Chem. Technol. , 18 (1945 ), 1945 .
6.
Greth A.
, Angew. Chem. , 51 (1938 ), 719 .
7.
Iyengar Y.
, J. Appl. Polym. Sci. , 22 (1978 ), 801 .
8.
Iyengar Y.
, J. Appl. Polym. Sci. , 19 (1975 ), 855 .
9.
Takeyama T.
, and
Matsui J.
, Rubber Chem. Technol. , 42 (1969 ), 159 .
10.
Hartz R. E.
, and
Adams H. T.
, J. Appl. Polym. Sci. , 21 (1977 ), 525 .
11.
Solomon T. S.
, Rubber Chem. Technol. , 58 (1985 ), 561 .
12.
Solomon T. S.
, in “Handbook of Adhesives” , 3nd edition,
Skeist I.
(ed.), p. 583 , Chapmann & Hall , (1989 ).
13.
Lattimer M. B.
,
Weber C. D.
, and
Hardt Z. R.
, Rubber Chem. Technol. , 58 (1985 ), 383 .
14.
Bandyopadhyay S.
,
Agrawal S.L.
,
Mandot S. K.
,
Mandal N.
,
Dasgupta S.
,
Mukhopadhyay R.
,
Deuri A. S.
, and
Ameta S. C.
, Prog. Rubber Plas. Recycl. Technol. , 21 (2005 ), 299 .
15.
Bandyopadhyay S.
,
Agrawal S. L.
,
Mandot S. K.
,
Mandal N.
,
Dasgupta S.
,
Mukhopadhyay R.
,
Deuri A. S.
, and
Ameta S. C.
, Prog. Rubber Plas. Recycl. Technol. , 22 , (2006 ), 45 .
16.
Bandyopadhyay S.
,
Agrawal S. L.
,
Dasgupta S.
,
Mukhopadhyay R.
, and
Ameta S. C.
, paper # 23, presented in ACS Rubber Division Fall Meeting at Pittsburg, USA, 2005 .
17.
Bandyopadhyay S.
,
Mukhopadhyay R.
,
Deuri A. S.
, and
Ameta S. C.
, Tyre Technol. Int. , p. 62 , December 2005 .
18.
Bhadra S.
,
De P. P.
,
Mandal N.
,
Mukhopadhyay R.
, and
Dasgupta S.
, J. Appl. Polym. Sci. , 89 (2003 ), 465 .
19.
Mandal N.
,
Dasgupta S.
, and
Mukhopadhyay R.
, Prog. Rubber Plas. Recycl. Technol. , 21 , (2005 ), 55 .
20.
Coran A. Y.
, and
Donnet J. B.
, Rubber Chemi. Technol. , 65 (1992 ), 973 .
21.
Luginsland H. D.
,
Frohlich J.
, and
Wehmeier A.
, Rubber Chem. Technol. , 75 (2002 ), 563 .
22.
Dierkes W.
,
Noordermeer J. W. M.
,
Rinker M.
,
Kelting K. U.
, and
Paderborn Pol C. V. D.
, Kautschuk Gummi Kunststoffe , 56 (2003 ), 338 .
23.
Sierra C. A.
,
Galan C.
,
Fatou J. M. G.
, and
Quiteria V. R. S.
, Rubber Chem. Technol. , 68 , (1995 ), 259 .
24.
Lin C. J.
,
Hergenrother W. L.
, and
Hilton A. S.
, Rubber Chem. Technol. , 75 (2002 ), 215 .
25.
Byres J. T.
, Rubber Chem. Technol. , 75 (2002 ), 527 .