In this work, an ultrasonic approach for early detection of fatigue-induced material changes in an aluminium alloy plate under dynamic loading is developed and validated. Material degradation followed by the emergence and growth of a crack was created by a fatigue machine while monitoring the modulation of sinusoidal ultrasonic wave packets sent along the plate around high- and low-load instants in the fatigue cycle. The determined wave parameters and the difference between their high- and low-load values were found to be very sensitive not only to the emergence of the crack but also to the plastic deformation, which, according to digital image correlation monitoring, preceded the crack formation and changed the effective elastic modulus felt by A0 and S0 Lamb mode contributions to the wave packets. Experimental analysis and simulations showed that the high sensitivity to microstructural changes was resulting from their substantial effect on the propagation velocity of the arriving A0 and S0 wave packet contributions, which in turn had a strong influence on their interference.
HunterGWRossRWBergerDE, et al. A concept of operations for an integrated vehicle health assurance system. Hanover, MD: NASA Center for Aerospace Information, pp. 21076–21320.
2.
CapriottiMdi ScaleaFL.Robust non-destructive inspection of composite aerospace structures by extraction of ultrasonic guided-wave transfer function in single-input dual-output scanning systems. J Intell Mater Syst Struct2020; 31(5): 651–664.
3.
QingXPYuanSWuZ.Current aerospace applications of structural health monitoring in China. In: 6th European workshop on structural health monitoring – We.3.A.4, Dresden, Germany, 3–6 July 2012.
4.
AlleyneDNCawleyP.The interaction of lamb waves with defects. IEEE Tran Ultrason Ferroelectr Freq Control1992; 39(3): 381–397.
5.
SereyVQuaegebeurNRénierM, et al. Selective generation of ultrasonic guided waves for damage detection in rectangular bars. Struct Health Monitor2021; 20(3): 1156–1168.
6.
SarrisGHaslingerSGHuthwaiteP, et al. Ultrasonic methods for the detection of near surface fatigue damage. NDT E Int2023; 135: 102790.
7.
HikataAChickBBElbaumC.Dislocation contribution to the second harmonic generation of ultrasonic waves. J Appl Phys1965; 36(1): 229–236.
8.
YostWTCantrellJr JHBreazealeMA.Ultrasonic nonlinearity parameters and thirdorder elastic constants of copper between 300 and 3°K. J Appl Phys1981; 52: 126.
9.
KimJ-YJacobsLJQuJ, et al. Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves. Acoust Soc Am2006; 120(3): 1266–1273.
CantrellJH.Quantitative assessment of fatigue damage accumulation in wavy slip metals from acoustic harmonic generation. Philos Mag2007; 86(11): 1539–1554.
12.
DonskoyDEkimovALuzzatoE, et al. N-SCAN®: new vibro-modulation system for detection and monitoring of cracks and other contact-type defects. In: SPIE’s 10th annual international symposium on smart structures and materials and 8th annual international symposium on NDE for health monitoring and diagnostics, San Diego, CA, 2003.
13.
SolodovI.Nonlinear acoustic NDT: approaches, methods, and applications. In: NDT in progress, 5th international workshop of NDT experts, 12–14 Oct 2009, Prague (NDT in Progress 2009), 2010.
14.
SolodovI.Ultrasonics of non-linear contacts: propagation, reflection and NDE-applications. Ultrasonics1998; 36: 383–390.
15.
KimJ-YYakovlevVARokhlinSI.Surface acoustic wave modulation on a partially closed fatigue crack. Acoust Soc Am2004; 115(5): 1961–1972.
16.
RokhlinSKimJ-Y.In situ ultrasonic monitoring of surface fatigue crack initiation and growth from surface cavity. Int J Fatigue2003; 25: 41–49.
17.
SolodovIDöringDBusseG.New opportunities for NDT using non-linear interaction of elastic waves with defects. J Mech Eng2011; 57: 169–182.
18.
SolodovIYKrohnNBusseG.CAN: an example of nonclassical acoustic nonlinearity in solids. Ultrasonics2002; 40: 621–625.
19.
SarensBVerstraetenBGlorieuxC, et al. Investigation of contact acoustic nonlinearity in delaminations by shearographic imaging, laser doppler vibrometric scanning and finite difference modeling. IEEE Trans Ultrason Ferroelectr Freq Control2010; 57(6): 1383–1395.
20.
ShkerdinGGlorieuxC.Nonlinear modulation of Lamb modes by clapping delamination. Acoust Soc Am2008; 124(6): 3397–3409.
21.
VanlanduitSGuillaumePVermeulenJ, et al. Tracking of cracks in airplane components using nonlinear surface wave propagation techniques. Key Eng Mater2005; 293–294: 549–556.
VanlanduitSGuillaumePVan Der LindenG.On-line monitoring of fatigue cracks using ultrasonic surface waves. NDT E Int2003; 36(8): 601–607.
24.
AlqahtaniHRayA.Forecasting and detection of fatigue cracks in polycrystalline alloys with ultrasonic testing via discrete wavelet transform. J Nondestruct Eval Diagn Prognost Eng Syst2021; 4: 031003-1.
25.
HuHFStaszewskiWJHuNQ, et al. Crack detection using nonlinear acoustics and piezoceramic transducers – Instantaneous amplitude and frequency analysis. Smart Mater Struct2010; 19: 065017.
26.
HuangNEShenZLongSR, et al. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond1998; 454(1971): 903–995.
27.
PavlopoulouSStaszewskiWJSoutisC.Evaluation of instantaneous characteristics of guided ultrasonic waves for structural quality and health monitoring. Struct Control Health Monitor2013; 20(6): 937–955.
28.
BiemansCStaszewskiWJBollerC, et al. Crack detection in Metallic structures using piezoceramic sensors. Key Eng Mater1999; 167–168: 112–121.
29.
PavlopoulouSStaszewskiWJSoutisC.A comparative study on novelty detection and frequency analysis of Lamb waves for the monitoring of metallic repaired structures. In: Emerging technologies in non-destructive testing V-Proceedings of the 5th Conference on Emerging Technologies in NDT, 2013, pp. 213–218.
30.
LoutridisSDoukaEHadjileontiadisLJ.Forced vibration behaviour and crack detection of cracked beams using instantaneous frequency. NDT E Int2005; 38(5): 411–419.
31.
SolodovI.Ultrasonic resonance of defects for nonlinear acoustic imaging and NDT. In: 11th European conference on non-destructive testing (ECNDT 2014), 06–10 October 2014, Prague, 2014.
32.
OharaYNakajimaHHaupertS, et al. Nonlinear ultrasonic phased array with fixed-voltage fundamental wave amplitude difference for high-selectivity imaging of closed cracks. J Acoust Soc Am2019; 146(1): 266–277.
33.
YamanakaKMiharaTTsujiT.Evaluation of closed cracks by model analysis of subharmonic ultrasound. Jpn J Appl Phys2004; 43(5B): 3082–3087.
34.
KorshakBASolodovIYBalladEM.DC effects, subharmonics, stochasticity and ‘memory’ for contact acoustic nonlinearity. Ultrasonics2002; 40(1–8): 707–713.
35.
Van Den AbeeleKSutinACarmelietJ, et al. Micro-damage diagnostics using nonlinear elastic wave spectroscopy (NEWS). NDT E Int2001; 34: 239–248.
36.
PayanCGarnierVMoysanJ, et al. Applying nonlinear resonant ultrasound spectroscopy to improving thermal damage assessment in concrete. J Acoust Soc Am2007; 121: EL125–EL130.
37.
MeoMPolimenoUZumpanoG.Detecting damage in composite material using nonlinear elastic wave spectroscopy methods. Appl Compos Mater2008; 15: 115–126.
38.
JhangK-Y.Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: a review. Int J Precis Eng Manuf2009; 10(1): 123–135.
39.
KuznetsovSOzolinshEOzolinshI, et al. Lamb wave interaction with a fatigue crack in a thin sheet of Al2024-T3. In: EU project meeting on aircraft integrated structural health assessment (AISHA), Leuven, June 2007.
40.
Van Den AbeeleKCarmelietJGateJAT, et al. Nonlinear elastic wave spectroscopy (NEWS) techniques to discern material damage, Part 11: single-mode nonlinear resonance acoustic spectroscopy. In: Research in nondestructive evaluation, 2000, pp. 31–42.
41.
MišovićMTadićNLučićD.Deformation characteristics of aluminium alloys. Građevinar 3/20162016; 68(3): 179–189.
42.
PedersenMM.Introduction to metal fatigue; Concepts and Engineering Approaches. Denmark: Aarhus University, 2018.
43.
RoylanceD.Mechanical Properties of Materials. In: Introduction to the Physics and Chemistry of Materials. 1st ed. Boca Raton: CRC Press, 2008.
44.
OrowanE.Theory of the fatigue of metals. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences 1938. DOI: 10.1098/rspa.1939.0055
OMICRON Lab. OMICRON electronics, Bode 100 – User manual, 2017.
56.
BatchelorG.An introduction to fluid dynamics (Cambridge Mathematical Library). Cambridge: Cambridge University Press, 2000.
57.
HeidemanMTJohnsonDHBurrusCS.Gauss and the history of the fast Fourier transform. IEEE ASSP Mag1984; 1(4): 14–21.
58.
RostamiBShanehsazzadehFFardmaneshM.Fast Fourier Transform based NDT approach for depth detection of hidden defects using HTS rf-SQUID. EEE Trans Appl Superconduct2018; 28(7): 1–6.
59.
SiddioloAMMaevRG.A 2D – FFT signal processing technique to enhance the contrast of air-coupled ultrasonic C-scans. In: 5th International workshop, advances in signal processing for NDE of materials – (ASPNDE 2005), Québec City (Canada), August 2005.
60.
FreemanWJ.Hilbert transform for brain waves. Scholarpedia2007; 2(1): 1338.
61.
ChoHLissendenCJ.Structural health monitoring of fatigue crack growth in plate structures with ultrasonic guided waves. Struct Health Monitor2011; 11(3): 393–404.
Department of Defense, USA. Metallic materials and elements for aerospace vehicle structures, Vols. MIL-HDBK-5H, 1998.
65.
YuanPSunetchiievaSLiuL, et al. Remote in-line evaluation of acousto-elastic effects during elastic–plastic transition in an aluminum plate under uniaxial tensile and dynamic fatigue loading by laser generated, optically detected surface acoustic waves. AIP Adv2022; 12: 055227.
