Enhancing the understanding of bolt loosening and wave transmission in bolted lap-joint connections: a numerical and experimental study using guided Lamb waves

Abstract

Bolt loosening in bolted lap-joint connections can result in catastrophic failures in industrial settings. Therefore, it is crucial to investigate these connections thoroughly and implement preventative measures. However, examining such connections requires considering multiple influencing parameters. In this study, numerical simulations were conducted using three-dimensional finite element analysis in Abaqus software to evaluate these parameters in detail. The study employed a guided wave-based structural health monitoring approach and a precise ultrasonic-guided Lamb wave propagation method. Time signals were analyzed using phase shift and transmission coefficient (TC) factors as suitable indicators. Additionally, the S₀ mode of the captured waves provided a highly informative wave packet for analysis due to its specific order. Initially, various simulations were carried out to determine the optimal length of the overlapping region that would result in the most effective transmission of waves. Increasing the bolt torque and the contact friction coefficient between the two plates in the overlapping region reduces the time for waves to reach the sensor and increases the TC of the passing waves. However, the saturation state does not cause any change in the received signals. Increasing the bolt torque is more effective in facilitating wave transmission through the connections than increasing the contact friction coefficient. Furthermore, variations in excitation voltage do not affect the arrival time or TC of the waves. The continuous wavelet transformation enabled a more detailed time-frequency analysis. The results demonstrate that changes in bolt torque do not impact the wave frequencies reaching the sensors, making the frequency insensitive to bolt loosening. Ultimately, the numerical simulation results were validated through experiments on a table-top laboratory sample. This research enhances researchers’ understanding of monitoring the health status of bolted lap-joint connections by investigating the impact of various parameters on guided Lamb wave transmission through these connections.