Bolts are widely used in civil engineering, and the detection of bolt loosening is of great significance to ensure the safety of a structure. This paper introduces a new method for detecting bolt loosening using a customized detachable strain sensor based on a patch antenna. A patch antenna with overlapping sub-patch is proposed to measure the longitudinal elongation of the entire bolt shaft, indicating the loosening state of the bolt. When the bolt is fastened, the elongation of the bolt under tension will change the combined length of the underlying patch and the radiation sub-patch, consequently increasing or decreasing the resonant frequency of the antenna. The resonant frequency of the antenna can be measured by the vector network analyzer. Furthermore, with wireless interrogation of the strain sensor based on the patch antenna, the proposed method can also be used in the wireless detection of bolt loosening. The authors conducted a finite element analysis of the bolt and the electromagnetic simulations of the antenna. They designed the detection sensor and conducted a series of experimental tests to demonstrate how a bolt under different applied preloads can be effective and feasible under the proposed method.
WangTSongGLiuS, et al.Review of bolted connection monitoring. Int J Distrib Sens Netw2013; 9: 871213.
2.
XuJChenRChenH, et al.Fast registration methodology for fastener assembly of large-scale structure. IEEE Trans Ind Electron2017; 64: 717–726.
3.
WangFMobinyAVan NguyenH, et al.If structure can exclaim: a novel robotic-assisted percussion method for spatial bolt-ball joint looseness detection. Struct Health Monit2020: 1475921720923147.
4.
WangFSongG. Bolt-looseness detection by a new percussion-based method using multifractal analysis and gradient boosting decision tree. Struct Health Monit2020; 19: 2023–2032.
5.
WangFHoSCMHuoL, et al.A novel fractal contact-electromechanical impedance model for quantitative monitoring of bolted joint looseness. IEEE Access2018; 6: 40212–40220.
6.
Kyodo, 2012/12/04. KOFU, Fatal Tunnel Collapse Blamed on Aging Bolts, The Japan Times, https://www.japantimes.co.jp.
7.
TemitopeSJ. Condition Monitoring of Bolted Joints. Sheffield, South Yorkshire, England: Ph.D. Thesis, The University of Sheffield, 2015.
8.
DingYRenPZhaoH, et al.Structural health monitoring of a high-speed railway bridge: five years review and lessons learned. Smart Struct Syst2018; 21: 695–703.
9.
KongQZhuJHoSCM, et al.Tapping and listening: a new approach to bolt looseness monitoring. Smart Mater Struct2018; 27: 07LT02.
10.
ZhangZLiuMSuZ, et al.Quantitative evaluation of residual torque of a loose bolt based on wave energy dissipation and vibro-acoustic modulation: a comparative study. J Sound Vib2016; 383: 156–170.
11.
ParvasiSMHoSCMKongQ, et al.Real time bolt preload monitoring using piezoceramic transducers and time reversal technique-a numerical study with experimental verification. Smart Mater Struct2016; 25: 085015.
12.
WangTLiuSShaoJ, et al.Health monitoring of bolted joints using the time reversal method and piezoelectric transducers. Smart Mater Struct2016; 25: 025010.
13.
YangJLiuPYangS, et al.Laser based impedance measurement for pipe corrosion and bolt-loosening detection. Smart Struct Syst2015; 15: 41–55.
14.
ChenDHuoLSongG. EMI based multi-bolt looseness detection using series/parallel multi-sensing technique. Smart Struct Syst2020; 25: 423–432.
15.
AmeriniFBarbieriEMeoM, et al.Detecting loosening/tightening of clamped structures using nonlinear vibration techniques. Smart Mater Struct2010; 19: 085013.
16.
KopsaftopoulosFPFassoisSD. Vibration based health monitoring for a lightweight truss structure: experimental assessment of several statistical time series methods. Mech Syst Signal Process2010; 24: 1977–1997.
17.
ZhaoNHuoLSongG. A nonlinear ultrasonic method for real-time bolt looseness monitoring using PZT transducer-enabled vibro-acoustic modulation. J Intell Mater Syst Struct2019; 31: 364–376.
18.
FierroGPMMeoM. IWSHM 2017: Structural health monitoring of the loosening in a multi-bolt structure using linear and modulated nonlinear ultrasound acoustic moments approach. Struct Health Monit2018; 17: 1349–1364.
19.
YangYNgC-TKotousovA. Bolted joint integrity monitoring with second harmonic generated by guided waves. Struct Health Monit2018; 18: 193–204.
20.
ZhangYSunXLohKJ, et al.Autonomous bolt loosening detection using deep learning. Struct Health Monit2019; 19: 105–122.
21.
RamanaLChoiWChaY-J. Fully automated vision-based loosened bolt detection using the Viola-Jones algorithm. Struct Health Monit2018; 18: 422–434.
RenLFengTHoM, et al.A smart “shear sensing” bolt based on FBG sensors. Measurement2018; 122: 240–246.
24.
ZhangJTianGMarindraA, et al.A review of passive RFID tag antenna-based sensors and systems for structural health monitoring applications. Sensors2017; 17: 265.
25.
XuXHuangH. Battery-less wireless interrogation of microstrip patch antenna for strain sensing. Smart Mater Struct2012; 21: 125007.
26.
TataUHuangHCarterRL, et al.Exploiting a patch antenna for strain measurements. Meas Sci Technol2009; 20: 015201.
27.
OzbeyBErturkVDemirH, et al.A wireless passive sensing system for displacement/strain measurement in reinforced concrete members. Sensors2016; 16: 496.
28.
ChungK LWangLLuoJ, et al.Comparative study on directional sensitivity of patch-antenna-based strain sensors. Int J RF Microw Comput-Aided Eng2020; 30: e22398.
29.
InserraDHuWLiZ, et al.Screw relaxing detection with UHF RFID tag. IEEE Access2020; 8: 78553–78564.
30.
WangWSadeqiANejadHR, et al.Cost-effective wireless sensors for detection of package opening and tampering. IEEE Access2020; 8: 117122–117132.
31.
YiXChoCCooperJ, et al.Passive wireless antenna sensor for strain and crack sensing-electromagnetic modeling, simulation, and testing. Smart Mater Struct2013; 22: 085009.
32.
TchafaFMHuangH. Microstrip patch antenna for simultaneous strain and temperature sensing. Smart Mater Struct2018; 27: 065019.
33.
DaliriAGalehdarAJohnS, et al.Wireless strain measurement using circular microstrip patch antennas. Sens Actuators A Phys2012; 184: 86–92.
34.
ChoCYiXLiD, et al.Passive wireless frequency doubling antenna sensor for strain and crack sensing. IEEE Sens J2016; 16: 5725–5733.
35.
XueSYiZXieL, et al.A displacement sensor based on a normal mode helical antenna. Sensors2019; 19: 3767.
36.
XueSXuKXieL, et al.Crack sensor based on patch antenna fed by capacitive microstrip lines. Smart Mater Struct2019; 28: 085012.
37.
XueSYiZXieL, et al.A passive wireless crack sensor based on patch antenna with overlapping sub-patch. Sensors2019; 19: 4327.
38.
CaizzoneSDiGiampaoloE. Wireless passive RFID crack width sensor for structural health monitoring. IEEE Sens J2015; 15: 6767–6774.
39.
NassarSASunTS. Surface roughness effect on the torque-tension relationship in threaded fasteners. Proc Inst Mech Eng J: J Eng Tribol2007; 221: 95–103.
40.
NassarSAEl-KhiamyHBarberGC, et al.An experimental study of bearing and thread friction in fasteners. J Tribol2005; 127: 263–272.
