Inspection interval optimization of aircraft landing gear component based on risk assessment using equivalent initial flaw size distribution method

Abstract

The nondestructive inspection interval is highly related with both system reliability and maintenance burden. Conventional inspection interval decision criteria based on the deterministic crack propagation analysis could require too much frequent inspection or sometimes occur structural failure owing to the rapid crack propagation than expected. The stochastic crack growth analysis method was proposed to compensate for the shortcomings of the deterministic analysis. This research studied the crack growth of aircraft landing gear components based on the equivalent initial flaw size distribution algorithm, and then we assessed failure risk. The calculated risk was validated using Monte-Carlo simulation, and finally, the optimum inspection interval was proposed to satisfy the US Airforce risk management criteria.

Keywords

Equivalent initial flaw size risk assessment nondestructive inspection interval Weibull analysis Monte-Carlo simulation probability of detection

Get full access to this article

View all access options for this article.

References

Yang

J-N

Trapp

. Inspection frequency optimization for aircraft structures based on reliability analysis. J Aircr 1975; 12(5): 494–496.

Ferreira

RJP

de Almeida

Cavalcante

CAV

. A multi-criteria decision model to determine inspection intervals of condition monitoring based on delay time analysis. Reliab Eng Syst Saf 2009; 94(5): 905–912.

Guo

Szidarovszky

Gerokostopoulos

, et al. “On determining optimal inspection interval for minimizing maintenance cost”. In 2015 annual reliability and maintainability symposium (RAMS), Palm Harbor, FL, USA, 26–29 Jan. 2015, 2015, pp. 1–7.

Gomes da Silva

Lopes

. An integrated framework for mode failure analysis, delay time model and multi-criteria decision-making for determination of inspection intervals in complex systems. J Loss Prev Process Ind 2018; 51: 17–28.

Gallagher

. “USAF damage tolerant design handbook: guidelines for the analysis and design of damage tolerant aircraft structures”, 1984.

DoD

U. S.

. “MIL-STD-1530D, Standard Practice-Aircraft Structural Integrity Program (ASIP)”. Washington D.C., USA: US Dep. Def., 2016.

Lin

Yang

. A stochastic theory of fatigue crack propagation. AIAA J 1985; 23(1): 117–124.

Straub

. Stochastic modeling of deterioration processes through dynamic Bayesian networks. J Eng Mech 2009; 135(10): 1089–1099.

Kim

H-S

Choi

J-H

. Determination of inspection interval for aircraft structures using stochastic approaches. In PHM society European conference, Utrecht, Netherlands, 2018; 4: 1.

10.

Johnson

. The history, logic and uses of the equivalent initial flaw size approach to total fatigue life prediction. Proced Eng 2010; 2(1): 47–58.

11.

Ray

. Stochastic measure of fatigue crack damage for health monitoring of ductile alloy structures. Struct Heal Monit 2004; 3(3): 245–263.

12.

Eleftheroglou

Loutas

. Fatigue damage diagnostics and prognostics of composites utilizing structural health monitoring data and stochastic processes. Struct Heal Monit 2016; 15(4): 473–488.

13.

Ganguli

. Structural Health Monitoring: A Non-deterministic Framework. Singapore: Springer Nature, 2020.

14.

Moreira

PMGP

de Matos

PFP

de Castro

PMST

. “Fatigue striation spacing and equivalent initial flaw size in Al 2024-T3 riveted specimens”. Theor Appl Fract Mech 2005; 43(1): 89–99.

15.

Abernethy

. The new weibull handbook: reliability and statistical analysis for predicting life, safety, supportability, risk, cost and warranty claims. North Palm Beach, FL: Dr. Robert B. Abernethy, 2004.

16.

Berens

Burns

Rudd

. “Risk analysis for aging aircraft fleets”. In Structural Integrity of Aging Airplanes. Berlin, Germany: Springer, 1991, pp. 37–51.

17.

DoD

. MIL-STD-882e, department of defense standard practice system safety. Washington D.C., USA: US Dep. Def., 2012.

18.

Gallagher

Babish

Malas

. Damage tolerant risk analysis techniques for evaluating the structural integrity of aircraft structures, 2005.