A new acoustic sensing capability, consisting of a flexible high-density linear piezoelectric sensor array coupled to a high-bandwidth interrogation device, is developed and applied to in situ wavenumber–frequency modal decomposition of acoustic emissions in plates. An experimental assessment of the capability is undertaken using acoustic emissions generated by a ball-drop impact on aluminium and composite panels. A new method for acoustic source localisation based on this new sensor array is described, and it is shown to be more accurate than a conventional multilateration technique using single-point piezoelectric receivers. The potential of this new capability for acoustic emission detection, location and possible quantification is discussed.
ProsserWHSealeMDSmithBT.Time-frequency analysis of the dispersion of Lamb modes. J Acoust Soc Am1999; 105(5): 2669–2676.
4.
KimIChattopadhyayA.Guided Lamb wave–based structural health monitoring using a novel wave packet tracing method for damage localization and size quantification. J Intel Mat Syst Str2015; 26(18): 2515–2530.
5.
SurgeonMWeversM.Modal analysis of acoustic emission signals from CFRP laminates. NDT&E Int1999; 32(6): 311–322.
6.
GiurgiutiuV.Structural health monitoring: with piezoelectric wafer active sensors. Amsterdam: Elsevier, 2007.
7.
HamstadMAGaryJ.A wavelet transform applied to acoustic emission signals: part 1: source identification. J Acoust Emission2002; 20: 39–61.
8.
ScholeyJJWilcoxPDWisnomMR, et al. Quantitative experimental measurements of matrix cracking and delamination using acoustic emission. Compos Part A: Appl S2010; 41(5): 612–623.
9.
AlleyneDCawleyP.A two-dimensional Fourier transform method for the measurement of propagating multimode signals. J Acoust Soc Am1991; 89(3): 1159–1168.
10.
RuzzeneM. Frequency-wavenumber domain filtering for improved damage visualization. In: ChenCH (ed.) Ultrasonic and advanced methods for nondestructive testing and material characterization. Singapore: World Scientific, 2007, pp. 591–611.
11.
TianZYuL.Lamb wave propagation study using frequency-wavenumber analysis. In: Proceedings of the ASME 2012 conference on smart materials, adaptive structures and intelligent systems, Stone Mountain, GA, 19–21 September 2012, pp. 713–721. New York: American Society of Mechanical Engineers.
12.
MichaelsTEMichaelsJERuzzeneM.Frequency–wavenumber domain analysis of guided wavefields. Ultrasonics2011; 51(4): 452–466.
13.
StaszewskiWJLeeBCMalletL, et al. Structural health monitoring using scanning laser vibrometry: I. Lamb wave sensing. Smart Mater Struct2004; 13(2): 251.
14.
NgCTVeidtM.A Lamb-wave-based technique for damage detection in composite laminates. Smart Mater Struct2009; 18(7): 074006.
15.
KudelaPRadzienskiMOstachowiczW.Impact induced damage assessment by means of Lamb wave image processing. Mech Syst Signal Pr2018; 102: 23–36.
16.
RajicNDavisCThomsonA.Acoustic-wave-mode separation using a distributed Bragg grating sensor. Smart Mater Struct2009; 18(12): 125005.
17.
RajicNRosalieCDavisC, et al. A distributed sensing capability for in situ time-domain separation of Lamb waves. In: Proceedings of the 2013 IEEE 8th international conference on intelligent sensors, sensor networks and information processing, Melbourne, VIC, Australia, 2–5 April 2013, pp. 99–104. New York: IEEE.
18.
RenBLissendenCJ.PVDF multielement Lamb wave sensor for structural health monitoring. IEEE T Ultrason Ferr2016; 63(1): 178–185.
19.
RajicNRosalieCvan der VeldenS, et al. A flexible high density piezoelectric sensor array for in situ modal decomposition. In: Proceedings of the 9th European workshop on structural health monitoring, Manchester, 10–13 July 2018.
20.
HaSChangF-K.Adhesive interface layer effects in PZT-induced Lamb wave propagation. Smart Mater Struct2010; 19(2): 025006.
21.
SmithardJRajicNvan der VeldenS, et al. An advanced multi-sensor acousto-ultrasonic structural health monitoring system: development and aerospace demonstration. Materials2017; 10(7): 832.
22.
LinBGiurgiutiuV.Modeling and testing of PZT and PVDF piezoelectric wafer active sensors. Smart Mater Struct2006; 15(4): 1085.
23.
PerelliADe MarchiLMarzaniA, et al. Acoustic emission localization in plates with dispersion and reverberations using sparse PZT sensors in passive mode. Smart Mater Struct2012; 21(2): 025010.
24.
RaghavanACesnikCES. Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring. Smart Mater Struct2005; 14(6): 1448.
AkaikeH.Markovian representation of stochastic processes and its application to the analysis of autoregressive moving average processes. In: ParzenETanabeKKitagawaG (eds) Selected papers of Hirotugu Akaike. New York: Springer, 1998, pp. 223–247.
27.
SauseMGRHamstadM. Acoustic emission analysis. In: BeaumontPWRZwebenCH (eds) Comprehensive composite materials II. Cambridge, MA: Academic Press, 2017, pp. 291–326.
NormanPDavisCRosalieC, et al. Interaction of high frequency Lamb waves with surface-mount sensor adhesives. Key Eng Mat2013; 558: 489–500.
30.
NiethammerMJacobsLJQuJ, et al. Time-frequency representations of Lamb waves. J Acoust Soc Am2001; 109(5): 1841–1847.
31.
OnoKMizutaniYTakemotoM.Analysis of acoustic emission from impact and fracture of CFRP laminates. J Acoust Emission2007; 25(1): 179–186.
32.
McCroryJAl-JumailiSKPearsonM, et al. Automated corrected MAR calculation for characterisation of AE signals. In: Proceedings of the 31st conference of the European working group on acoustic emission (EWGAE), Dresden, 3–5 September 2014.
33.
EatonMMayMFeatherstonC, et al. Characterisation of damage in composite structures using acoustic emission. J Phys Conf Ser2011; 305: 012086.
34.
BurksBKumosaM.A modal acoustic emission signal classification scheme derived from finite element simulation. Int J Damage Mech2014; 23(1): 43–62.
35.
SauseMGRHornS. Influence of specimen geometry on acoustic emission signals in fiber reinforced composites: FEM-simulations and experiments. In: Proceedings of the 29th European working group on acoustic emission (EWGAE), Vienna, 8–10 September 2010.
36.
Le GallTMonnierTFuscoC, et al. Towards quantitative acoustic emission by finite element modelling: contribution of modal analysis and identification of pertinent descriptors. Appl Sci2018; 8(12): 2557.
