Fatigue performance investigation for hangers of suspension bridges based on site-specific vehicle loads

Abstract

Hangers or suspenders of a suspension bridge are the primary load-carrying members and are vital to the structural integrity and service life of the bridge. Site-specific vehicle loads monitored by the weigh-in-motion system can assist to obtain the operational cyclic stresses of hangers. Differing from most existing studies, herein, a framework for fatigue performance investigation for hangers of suspension bridges is proposed utilizing the full information of the weigh-in-motion data. This framework includes four steps: (1) generate influence surfaces for hangers, (2) reconstruct vehicular loading flows based on the weigh-in-motion data, (3) calculate time histories of hanger tension forces, and (4) evaluate fatigue damages and predict fatigue lives. Critical issues, such as the loading configuration of trucks, the threshold of the gross vehicle weight, and the time step for stress calculation, have been studied and discussed in detail. Based on 8-month weigh-in-motion data of a prototype suspension bridge, it is shown that the fatigue damage of hangers can be evaluated day by day, and subsequently the fatigue lives can be predicted. The correlation between the fatigue damages and vehicular loads is also investigated in this study.

Keywords

Suspension bridge hanger structural health monitoring weigh-in-motion fatigue damage finite element analysis influence surface

Get full access to this article

View all access options for this article.

References

Zhu

et al . Long-term condition assessment of suspenders under traffic loads based on structural monitoring system: application to the Tsing Ma Bridge. Struct Control Health Monit 2012; 19: 82–101.

Chen

Xie

et al . Fatigue performance assessment of composite arch bridge suspenders based on actual vehicle loads. Shock Vib 2015; 2015: 659092.

Takena

Miki

Shimokawa

et al . Fatigue resistance of large-diameter cable for cable stayed bridges. J Struct Eng: ASCE 1992; 118(3): 701–715.

Suh

Chang

SP.

Experimental study on fatigue behaviour of wire ropes. Int J Fatigue 2000; 22: 339–347.

Zhu

et al . Probabilistic deterioration model of high-strength steel wires and its application to bridge cables. Struct Infrastruct E 2015; 11(9): 1240–1249.

Zhou

Optic fiber sensor-based smart bridge cable with functionality of self-sensing. Mech Syst Signal Pr 2013; 35: 84–94.

Bao

Shi

Beck

et al . Identification of time-varying cable tension forces based on adaptive sparse time-frequency analysis of cable vibrations. Struct Control Health Monit 2017; 24: e1889.

Feng

Scarangello

Feng

et al . Cable tension force estimate using novel noncontact vision-based sensor. Measurement 2017; 99: 44–52.

Guo

Frangopol

Chen

Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis. Comput Struct 2012; 112–113: 245–257.

10.

Liu

Zhang

Liu

et al . Fatigue reliability assessment for orthotropic steel deck details under traffic flow and temperature loading. Eng Fail Anal 2017; 71: 179–194.

11.

Liu

Guo

Chai

Probabilistic fatigue life prediction of bridge cables based on multiscaling and mesoscopic fracture mechanics. Appl Sci 2016; 6: 99.

12.

Liu

Guo

Huang

et al . Fatigue life evaluation on short suspenders of long-span suspension bridge with central clamps. J Bridge Eng: ASCE 2017; 22(10): 04017074.

13.

Petrini

Bontempi

Estimation of fatigue life for long span suspension bridge hangers under wind action and train transit. Struct Infrastruct E 2011; 7(7–8): 491–507.

14.

Deng

Liu

Chen

Long-term in-service monitoring and performance assessment of the main cables of long-span suspension bridges. Sensors 2017; 17: 1414.

15.

Liu

Deng

Cai

CS.

Deflection monitoring and assessment for a suspension bridge using a connected pipe system: a case study in China. Struct Control Health Monit 2015; 22: 1408–1425.

16.

Ministry of Transport of the People’s Republic of China. General code for design highway bridges and culverts JTG D60-2015. Beijing, China: China Communications Press, 2015.

17.

AASHTO. LRFD bridge design specifications. Washington, DC: AASHTO, 2010.

18.

Han

et al . Study of vehicle-bridge coupling vibration under actual traffic flow. China J Highw Trans 2012; 25(6): 80–87 (in Chinese).

19.

Downing

Socie

DF.

Simplified rainflow cycle counting algorithms. Int J Fatigue 1982; 4: 31–40.

20.

Miner

MA.

Cumulative damage in fatigue. J Applied Mechanics 1945; 12: 159–164.

21.

Faber

Engelund

Rackwitz

Aspects of parallel wire cable reliability. Struct Saf 2003; 25(2): 201–225.

22.

Zeng

Chen

Tang

et al . Fatigue assessment of hanger wires of suspension bridges in its operation life based on in-situ traffic flow. J Disaster Prev Mitig Eng 2014; 34(2): 185–191 (in Chinese).

23.

Hosford

WF.

Mechanical behavior of materials. Cambridge: Cambridge University Press, 2005.