This article reports on the characterization of delamination damages in composite laminates using wave visualization method. A combination of plate-guided ultrasound and air-coupled ultrasonics is used to locate and visualize delaminations. The study focuses on the physics of Lamb wave propagation and interaction with delaminations at various through-thickness locations and positions. Three-dimensional finite element simulations are used to study, in detail, the changes in wave features such as mode velocity, wavelength and wave refraction in the delamination region. These wave features provide information on the location, position and orientation of the delamination. These studies are validated by experimental measurements. The influence of position of source and delamination on wave refraction in the delamination region is examined. This method also correlates the results obtained from experiments and finite element simulations to theoretical dispersion curves in order to distinctly determine the delamination location.
JanardhanPMBalasubramaniamK.Lamb-wave-based structural health monitoring technique for inaccessible regions in complex composite structures. Struct Control Hlth2014; 21(5): 817–832.
2.
RaghavanACesnikCES. Review of guided-wave structural health monitoring. Shock Vib Digest2007; 39(2): 91–114.
3.
RoseJL.Ultrasonic waves in solid media. Cambridge: Cambridge University Press, 1999.
4.
SuZYeLLuY.Guided Lamb waves for identification of damage in composite structures: a review. J Sound Vib2006; 295(3–5): 753–780.
5.
GuoNCawleyP.The interaction of Lamb waves with delaminations in composite laminates. J Acoust Soc Am1993; 94(4): 2240–2246.
6.
KesslerSSSpearingSMSoutisC.Damage detection in composite materials using Lamb wave methods. Smart Mater Struct2002; 11(2): 269–278.
7.
LiuZYuHHeC. Delamination detection in composite beams using pure Lamb mode generated by air-coupled ultrasonic transducer. J Intel Mat Syst Str2014; 25(5): 541–550.
8.
PadiyarMJBalasubramaniamK.Quantitative characterization of interface delamination in composite T-joint using couplant-free Lamb wave methods. J Reinf Plast Comp2016; 35(4): 345–361.
9.
RamadasCJanardhanPMBalasubramaniamK. Delamination size detection using time of flight of anti-symmetric (Ao) and mode converted Ao mode of guided Lamb waves. J Intel Mat Syst Str2010; 21(8): 817–825.
10.
BhardwajMC. Phenomenally high transduction air/gas transducers for practical non-contact ultrasonic applications. In: Proceedings of review of progress in quantitative nondestructive evaluation (ed ThompsonDOChimentiDE), Chicago, IL, 22–25 July 2008, vol. 1096, pp. 920–927. Melville, NY: AIP.
11.
CastaingsMCawleyP.The generation, propagation, and detection of Lamb waves in plates using air-coupled ultrasonic transducers. J Acoust Soc Am1996; 100(5): 3070–3077.
12.
MichaelsJEMichaelsTE. On the measurement of guided wavefields via air-coupled ultrasonic transducers. In: Proceedings of review of progress in quantitative nondestructive evaluation (ed ChimentiDEBondLJ), Boise, ID, 20–25 July 2014, vol. 1650, pp. 792–798. Melville, NY: AIP.
MichaelsTEMichaelsJERuzzeneM.Frequency–wavenumber domain analysis of guided wavefields. Ultrasonics2011; 51(4): 452–466.
15.
ParkBAnYKSohnH.Visualization of hidden delamination and debonding in composites through noncontact laser ultrasonic scanning. Compos Sci Technol2014; 100: 10–18.
16.
RamadasCPadiyarJBalasubramaniamK. Lamb wave based ultrasonic imaging of interface delamination in a composite T-joint. NDT&E Int2011; 44(6): 523–530.
17.
TianZYuLLeckeyC.Delamination detection and quantification on laminated composite structures with Lamb waves and wavenumber analysis. J Intel Mat Syst Str2015; 26(13): 1723–1738.
18.
TianZLeckeyCSeeboJ.Guided wave imaging for detection and evaluation of impact-induced delamination in composites. Smart Mater Struct2015; 24: 105019.
19.
YashiroSTakatsuboJToyamaN.An NDT technique for composite structures using visualized Lamb-wave propagation. Compos Sci Technol2007; 67: 3202–3208.
20.
PandaRSRajagopalPBalasubramaniamK. An approach for defect visualization and identification in composite plate structures using air-coupled guided ultrasound. In: Proceedings of review of progress in quantitative nondestructive evaluation (ed ChimentiDEBondLJ), Boise, ID, 20–25 July 2014, vol. 1650, pp. 1299–1306. Melville, NY: AIP.
21.
SasankaDVSMadhavanVPadiyarMJ. Visualization studies of Lamb wave propagation and interactions with anomalies in composite laminates using air-coupled ultrasonics. In: Proceedings of review of progress in quantitative nondestructive evaluation (ed ChimentiDEBondLJThompsonDO), Baltimore, MD, 21–26 July 2013, vol. 1581, pp. 1091–1097. Melville, NY: AIP.
22.
DISPERSE user’s manual, version 2.0.11, January2016.
23.
ChimentiDEMartinRW.Nondestructive evaluation of composite laminates by leaky Lamb waves. Ultrasonics1991; 29(1): 13–21.
24.
ABAQUS analysis user’s manual, version 6.12, January2016.
25.
RamdhasAPattanayakRKBalasubramaniamK. Symmetric low-frequency feature-guided ultrasonic waves in thin plates with transverse bends. Ultrasonics2015; 56: 232–242.
26.
RajagopalPLoweMJS. Short range scattering of the fundamental shear horizontal guided wave mode normally incident at a through-thickness crack in an isotropic plate. J Acoust Soc Am2007; 122(3): 1527–1538.
27.
CastaingsMSinghDViotP.Sizing of impact damages in composite materials using ultrasonic guided waves. NDT&E Int2012; 46: 22–31.
