The detection of bond deterioration for reinforced concrete structure in its early stages and throughout its service life can help to ensure the safety of the structure. An active sensing system with lead zirconium titanate sensors and using ultrasonic guided waves has been studied for bond integrity detection of structures under split failures. A series of pullout tests for unconfined concrete specimens has been performed. Both lead zirconium titanate sensor clips and strain gages were used to monitor the bonding damage. A bond deterioration index is defined to measure the bond integrity of the structure. While the strain gage measurements did not indicate any reduction in bond stress as the specimens were pulled to failure, the active sensing system showed a linear increment of bond deterioration index with the applied loads, indicating the accumulation of bond deterioration in unconfined concrete structure.
SohCTsengKK-HBhallaS. Performance of smart piezoceramic patches in health monitoring of a RC bridge. Smart Mater Struct2000; 9(4): 533.
3.
WangCSWuFChangF-K. Structural health monitoring from fiber-reinforced composites to steel-reinforced concrete. Smart Mater Struct2001; 10(3): 548–552.
4.
BonteaDMChungDDLLeeGC. Damage in carbon fiber-reinforced concrete, monitored by electrical resistance measurement. Cement Concrete Res2000; 30(4): 651–659.
5.
ParkSAhmadSYunCB. Multiple crack detection of concrete structures using impedance-based structural health monitoring techniques. Exp Mech2006; 46(5): 609–618.
6.
SongFHuangGLKimJH. On the study of surface wave propagation in concrete structures using a piezoelectric actuator/sensor system. Smart Mater Struct2008; 17(5): 055024.
7.
GuHSongGDhondeH. Concrete early-age strength monitoring using embedded piezoelectric transducers. Smart Mater Struct2006; 15(6): 1837.
8.
SongGGuHMoYL. Concrete structural health monitoring using embedded piezoceramic transducers. Smart Mater Struct2007; 16(4): 959.
9.
ChanH-LChangF-K. Design of SMART rebar for identifying debond in reinforced concrete. In: SPIE 9th annual symposium on smart structures and materials, San Diego, CA, 17–21 March 2002.
10.
JiQHoMZhengR. Exploratory study of stress wave communication in concrete structures. In: The 6th international conference on structural health monitoring of intelligent infrastructure, Hong Kong, China, 2013, paper no. MS01-19.
11.
WangXDHuangG. Identification of embedded cracks using back-propagating elastic waves. Inverse Probl2004; 20(5): 1393–1409.
12.
IhnJBChangF-K. Pitch-catch active sensing methods in structural health monitoring for aircraft structures. Struct Health Monit2008; 7(1): 5–19.
13.
SuZYeLLuY. Guided Lamb waves for identification of damage in composite structures: a review. J Sound Vib2006; 295(3): 753–780.
14.
LuYLiJCYeL. Guided waves for damage detection in rebar-reinforced concrete beams. Constr Build Mater2013; 47(1): 370–378.
15.
NaWBKunduTEhsaniMR. Lamb waves for detecting delamination between steel bars and concrete. Comput-Aided Civ Inf2003; 18(1): 58–63.
16.
SunMStaszewskiWJSwamyRN. Application of low-profile piezoceramic transducers for health monitoring of concrete structures. NDT&E Int2008; 41(8): 589–595.
17.
WangYZhuXHaoH. Guided wave propagation and spectral element method for debonding damage assessment in RC structures. J Sound Vib2009; 324(3): 751–772.
18.
WuFChangF-K. Debond detection using embedded piezoelectric elements for reinforced concrete structures—part II: analysis and algorithm. Struct Health Monit2006; 5(1): 17–28.
19.
WuFChangF-K. Debond detection using embedded piezoelectric elements in reinforced concrete structures—part I: experiment. Struct Health Monit2006; 5(1): 5–15.
20.
YangYCascanteGPolakMA. Depth detection of surface-breaking cracks in concrete plates using fundamental Lamb modes. NDT&E Int2009; 42(6): 501–512.
21.
ErvinBLReisH. Longitudinal guided waves for monitoring corrosion in reinforced mortar. Meas Sci Technol2008; 19(5): 005702.
22.
SharmaSMukherjeeA. Longitudinal guided waves for monitoring chloride corrosion in reinforcing bars in concrete. Struct Health Monit2010; 9(6): 555–567.
23.
BeardMLoweMJSCawleyP. Ultrasonic guided waves for inspection of grouted tendons and bolts. J Mater Civil Eng2003; 15(3): 212–218.
24.
FilippouFCPopovEPBerteroVV. Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. Berkeley, CA: Earthquake Engineering Research Center, University of California, Berkeley, 1983, 194 pp.
25.
PopovEP. Bond and anchorage of reinforcing bars under cyclic loading. ACI J Proc1984; 81(4): 340–349.
26.
GraffKF. Wave motion in elastic solids. New York: Courier Dover Publications, 1975.
27.
PavlakovicBNCawleyP. DISPERSE user’s manual version 2.0.1.1. London: Imperial College, University of London, 2000.
28.
ChanH-L. Detection of bond deterioration in reinforced concrete using active sensing technique. Stanford, CA: Stanford University, 2005.
29.
EligehausenRPopovEPBerteroVV. Local bond stress-slip relationships of deformed bars under generalized excitations. In: Proceedings of the 7th European conference on earthquake engineering, Athens, 20–25 September 1982, pp. 69–80.
30.
MirzaSMHoudeJ. Study of bond stress-slip relationships in reinforced concrete. ACI J Proc1979; 76(1): 19–46.
31.
NilsonAH. Internal measurement of bond slip. ACI J Proc1972; 69(7): 439–441.
32.
ViwathanatepaSPopovEPBerteroVV. Effects of generalized loadings on bond of reinforcing bars embedded in confined concrete blocks. Berkeley, CA: Earthquake Engineering Research Center, University of California, Berkeley, 1979, 304 pp.
33.
WuFYiJLiWJ. Numerical analysis of PZT rebar active sensing system for structural health monitoring of RC structure. In: Proceedings of SPIE, nondestructive characterization for composite materials, aerospace engineering, civil infrastructure, and homeland security, San Diego, CA, 9–13 March 2014, vol. 9063, issue 1, pp. 906314-1–906314-11.
34.
GotoY. Crack formed in concrete around tension bars. ACI J Proc1971; 68(1): 244–251.
35.
TepfersR. Cracking of concrete cover along anchored deformed reinforcing bars. Mag Concrete Res1979; 31(106): 3–12.
