Development of method for in-service crack detection based on distributed fiber optic sensors

Abstract

Many bridges worldwide are approaching the end of their lifespan and it is necessary to assess their health condition in order to mitigate risks, prevent disasters, and plan maintenance activities in an optimized manner. Fracture critical bridges are of particular interest since they have only little or no load path redundancy. Structural health monitoring (SHM) has recently emerged as a branch of engineering, which aim is to improve the assessment of structural condition. Distributed optical fiber sensing technology has opened new possibilities in SHM. A distributed deformation sensor (sensing cable) is sensitive at each point of its length to strain changes and cracks. Such a sensor practically monitors a one-dimensional strain field and can be installed over all the length of the monitored structural members, thereby providing with integrity monitoring, i.e. direct detection and characterization (including recognition, localization, and quantification or rating) of local strain changes generated by damage. Integrity monitoring principles are developed and presented in this article. A large scale laboratory test and a real on-site application are briefly presented.

Keywords

fiber-optic sensors fracture critical bridges in-service crack detection structural health monitoring Brillouin scattering

Get full access to this article

View all access options for this article.

References

. AASHTO LRFD Bridge Design Specifications. American association of state highway and transportation officials. 3rd ed. Washington, DC: American Association of State Highway and Transportation, pp. 1–1822, 2004.

. TRB. NCHRP synthesis 354, inspection and management of bridges with fracture-critical details, a synthesis of highway practice. Washington, DC: Transportation and Research Board, pp. 1–75, 2005.

. MnDOT, Bridge #9340. I-35W over the Mississippi river at Minneapolis, MN. Annual Bridge Inspection report, September 2001. Roseville, MN: Minnesota Department of Transportation, Metro Division, Maintenance Operations, Bridge Inspection, pp.1–33, 2002.

. Minnesota Department of Employment and Economic Development – DEED. Economic impacts of the I-35W Bridge Collapse, 2009. http://www.positivelyminnesota.com/Data_Publications/Data/Research_Reports/Economic_Development_Insights/Economic_Impacts_of_the_I35W_Bridge_Collapse.pdf, last accessed on June 20, 2011, pp. 1–1.

. Minnesota Department of Transportation – MnDOT. I-35W St. Anthony Falls Bridge. FAQ, 2009.

. Rytter A. Vibration based inspection of civil engineering structures, Ph.D. Dissertation, University of Aalborg, Denmark, 1993.

Posenato

Lanata

Inaudi

Smith

IFC

. Model-free data interpretation for continuous monitoring of complex structures. Adv Eng Informatics 2008; 22(1): 135–144.

Posey

Jr Johnson

Vohra

. Strain sensing based on coherent Rayleigh scattering in an optical fibre. Electron Lett 2000; 36(20): 1688–1689.

Wait

Hartog

. Spontaneous Brillouin-based distributed temperature sensor utilizing a fiber Bragg grating notch filter for the separation of the Brillouin signal. IEEE Photonics Technol Lett 2001; 13(5): 508–510.

10.

Kurashima

Horiguchi

Tateda

. Distributed temperature sensing using stimulated Brillouin scattering in optical silica fibers. Optics Lett 1990; 15(18): 1038–1040.

11.

Thevenaz

Facchini

Fellay

Rober

Inaudi

Dardel

. Monitoring of large structure using distributed Brillouin fiber sensing. 1999; In: Proceedings of 13th International Conference on Optical Fiber Sensors. Kyongju: Korea, 345–348. SPIE, OFS-13, 3746.

12.

Glisic

Posenato

Persson

Myrvoll

Enckell

Inaudi

. Integrity monitoring of old steel bridge using fiber optic distributed sensors based on Brillouin scattering. 2007; SHMII-3, The 3rd International Conference on Structural Health Monitoring of Intelligent Infrastructure. Vancouver, Paper on conference CD. November 13-16 2007, Canada.

13.

Glisic

Inaudi

. Sensing tape for easy integration of optical fiber sensors in composite structures. 2003; In: 16th International Conference on Optical Fiber Sensors. Nara, Japan, We 3–8, Bellingham WA: SPIE Press, 2003.

14.

Glisic

Inaudi

. Fibre optic methods for structural health monitoring Chichester, UK: John Wiley & Sons, Inc, pp. 1–262, 2007.

15.

Glisic

Enckell

Myrvoll

Bergstrand

. Distributed sensors for damage detection and localization. 2009; In: SHMII-4, The 4th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Paper on conference CD, July 22 24, 2009, Zurich, Switzerland. .

16.

Ravet

Briffod

Glisic

Nikles

Inaudi

. Sub-millimeter crack detection with Brillouin based fiber optic sensors. IEEE Sensors J 2009; 9(11): 1391–1396.

17.

Enckell

Glisic

Myrvoll

Bergstrand

. ‘Evaluation of a large-scale bridge strain, temperature and crack monitoring with distributed fibre optic sensors’. J Civil Struct Health Monit 2011; 1: 37–46.

18.

Glisic

Oberste-Ufer

. Validation testing of fiber optic method for buried pipelines health assessment after earthquake-induced ground movement. In Proceedings of 2011 NSF Engineering Research and Innovation Conference 2011; , Atlanta, GA, USA, Paper on conference CD, January 4 7, 2011.