Power and energy transduction analysis of piezoelectric wafer-active sensors for structural health monitoring

Abstract

This article presents a systematic investigation of power and energy transduction in piezoelectric wafer-active sensors (PWAS) for structural health monitoring (SHM). After a literature review of the state-of-the-art, we developed a predictive modeling of the multi-physics power and energy transduction between structurally guided waves and PWAS in closed-form analytical expressions. The model assumptions include: (a) one-dimensional axial and flexural wave propagations; (b) ideal bonding (pin-force) connection between PWAS and structure; and (c) ideal excitation source at the transmitter PWAS and fully resistive external load at the receiver PWAS. Both wave propagation method for an infinite beam and normal mode expansion method for a finite beam were considered. Frequency response functions were developed for voltage, current, complex power, active power, etc. The power and energy analysis for single PWAS transmitter, single PWAS receiver and a complete PWAS pitch-catch setup were considered. The numerical simulation and graphical charts show the trends in the power and energy flow behavior of PWAS for SHM. The peaks and valleys of power can be exploited for optimum design for PWAS SHM applications.

Keywords

frequency response function power energy piezoelectric wafer active sensors

Get full access to this article

View all access options for this article.

References

ASCE. ‘Report Card for America's Infrastructure’, American Society of Civil Engineers, http://www.asce.org/reportcard/2005/index.cfm (Accessed date 2005).

Viktorov

IA.

Rayleigh and lamb waves – physical theory and applications. New York: Plenum Press, 1967.

Auld

BA.

Acoustic fields and waves in solids. New York: Wiley Interscience, John Wiley & Sons, vols. 1 and 2, 1973.

Achenbach

JD.

Wave propagation in elastic solids. Amsterdam: Elsevier, 1973.

Rose

JL.

Ultrasonic waves in solid media. New York: Cambridge University Press, 1999.

Liao

WH.

. Sensitivity analysis and energy harvesting for a self-powered piezoelectric sensors. J Intell Mater Syst Struct 2005; 16: 785–797.

Erturk

Inman

DJ.

. On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. J Intell Mater Syst Struct 2008; 19(11): 1311–1325.

Erturk

Inman

DJ.

. Issues in mathematical modeling of piezoelectric energy harvesters. Smart Mater Struct 2008; 17(6): 065016–065016.

Crawley

De Luis

. Use of piezoelectric actuators as elements of intelligent structures. AIAA J 1987; 25: 1373–1385.

10.

Giurgiutiu

Structural health monitoring with piezoelectric wafer active sensors. Amsterdam, Boston: Elsevier Academic Press, 2008, 760.

11.

Santoni

Giurgiutiu

. Lamb wave mode tuning of piezoelectric wafer active sensors for structural health monitoring. ASME J Vib Acoust 2007; 129(6): 752–762.

12.

Santoni G. Fundamental studies in the lamb-wave interaction between piezoelectric wafer active sensor and host structure during structural health monitoring, Theses and Dissertations. Paper 256, scholarcommons.sc.edu/etd/256 (Accessed date 2010).

13.

Lin

Giurgiutiu

. Modeling and testing of PZT and PVDF piezoelectric wafer active sensors. Smart Mater Struct 2006; 15(4): 1085–1093.

14.

Lin B. Power and energy transduction in piezoelectric wafer active sensors for structural health monitoring: modeling and applications. Theses and Dissertations. Paper 212, scholarcommons.sc.edu/etd/212 (Accessed date 2010).

15.

Giurgiutiu

Micromechatronics modeling, analysis, and design with MATLAB. 2nd ed. Boca Raton, FL: CRC Press, 2009, 920.