In order to localize and quantify the effects of externally bonded carbon fiber reinforced polymer (CFRP) composites on a deteriorating reinforced concrete (RC) bridge structure, a vibration based monitoring approach is implemented. Modal data, including mode shapes of the deck slab, are extracted under the output-only configuration using time domain decomposition (TDD) techniques from ambient vibration tests conducted prior to rehabilitation, and at periodic intervals over a period of about two years after rehabilitation. Damage indices and fractional stiffness changes are determined by bay to enable assessment of CFRP rehabilitation effectiveness and response changes as a function of time.
Triantafillou, T.C. and Plevris, N. (1991). Post-strengthening of RC beams with epoxy-bonded fiber composite material. In: Proceedings of the Specialty Conference on Advanced Composite Materials in Civil Engineering Structures, Las Vegas, NV, pp. 245—256.
2.
Karbhari, V.M. and Sikorsky, S. (2002). Field-validation and monitoring of bridge renewal using FRP composites. In: Proceedings of IABSE Symposium, Melbourne, Australia, pp. 8.
3.
Shahrooz, B.M. and Boy, S. (2004). Retrofit of a three span slab bridge with fiber reinforced polymer systems — testing and rating . ASCE Journal of Composites for Construction, 8(3), 241—247.
4.
Alampalli, S. and Kunin, J. (2000). Rehabilitation and field testing of an FRP bridge deck on a truss bridge. Composite Structures, 57(1—4), 373—375.
5.
Cardinale, G. and Orlando, M. (2004). Structural evaluation and strengthening of a reinforced concrete bridge. ASCE Journal of Bridge Engineering,9(1), 35—42.
6.
Bonfiglioli, B., Pascale, G. and Martinez de Mingo, S. (2004). Dynamic testing of RC beams damaged and repaired with fiber reinforced polymer sheets. ASCE Journal of Materials in Civil Engineering, 16(5), 400—406.
7.
Abe, M., Fujino, Y., Yanagihara, M. and Sato, M. (2000). Monitoring of Hakucho suspension bridge by ambient vibration measurement. In: Proceedings of SPIE — The International Society for Optical Engineering, Vol. 3995, pp. 237—244.
8.
Feng, M.Q., Chen, Y. and Tan, C.-A. (2005). Global structural condition assessment of highway bridges by ambient vibration monitoring. In: Proceedings of SPIE — The International Society for Optical Engineering, Vol. 5769, pp. 111—125.
9.
Mahmoud, M., Abe, M. and Fujino, Y. (2001). Analysis of suspension bridge by ambient vibration measurement using time domain method and its application to health monitoring . In: Proceedings of the International Modal Analysis Conference , Vol. 1, pp. 504—510.
10.
Doebling, S.W. and Farrar, C.R. (1996). Computation of structural flexibility for bridge health monitoring using ambient modal data. In: Proceedings of Engineering Mechanics, Vol. 2, pp. 1114—1117, ASCE, VA, USA.
11.
Ta, M.-N. , Lardis, J. and Marc, B. (2006). Natural frequencies and modal damping ratios identification of civil structures from ambient vibration data. Shock and Vibration, 13(4-5), 429—444.
12.
Lee, J.W., Kim, J.D., Yun, C.B., Yi, J.H. and Shim, J.M. (2002). Health-monitoring method for bridges under ordinary traffic loadings. Journal of Sound and Vibration, 257(2), 247—264.
13.
Sikorsky, C. and Karbhari, V.M. (2003). An Assessment of structural health monitoring capabilities to load rate bridges. In: Proceedings of the First International Conference on Structural Health Monitoring and Intelligent Infrastructure, pp. 977—985, A.A. Balkema Publishers, Tokyo, Japan.
14.
Karbhari, V.M. (2005). Health monitoring, damage prognosis and service-life prediction — issues related to implementation , In: Ansari, F. (ed.), Chapter V, Sensing Issues in Civil Structural Health Monitoring, pp. 301—310, Springer, Tokyo, Japan.
15.
Rytter, A. (1993). Vibration Based Inspection of Civil Engineering Structures. PhD thesis, Department of Building Technology and Structural Engineering, Alborg University, Denmark.
16.
California Department of Transportation (2004). Bride Design Specifications, September 2004.
17.
Lee, L.S. (2005). Monitoring and Service Life Estimation of Reinforced Concrete Bridge Decks Rehabilitated with Externally Bonded Carbon Fiber Reinforced Polymer (CFRP) Composites. PhD Dissertation, Structural Engineering, University of California, San Diego.
18.
Kim, B.H. (2002). Local Damage Detection Using Modal Flexibility. PhD Dissertation, Department of Civil Engineering, Texas A&M University.
19.
Stubbs, N., Park, S., Sikorsky, C. and Choi, S. (2000). A global non-destructive damage assessment methodology for civil engineering structures. International Journal of Systems Science, 31(11), 1361—1373.
20.
Liu, C. and DeWolf, J.T. (2006). Effect of temperature on modal variability for a curved concrete bridge. In: Proceedings of SPIE — The International Society for Optical Engineering, 6174(II), 61743B.
21.
Peeters, B., Maeck, J. and DeRoeck, G. (2001). Vibration-based damage detection in civil engineering: excitation sources and temperature effects. Smart Materials and Structures, 10(3), 518—527.
22.
Lathi, B.P. (2000). Linear Signals and Systems, New York: Oxford University Press, Inc.
23.
Ewins, D.J. (2001). Modal Testing: Theory, Practice and Applications , 2nd edn, Research Studies Press, Ltd, London, UK.
