Improved Damage Detection for Beam-type Structures using a Uniform Load Surface

Abstract

A combined analytical and experimental study is conducted to develop efficient and effective damage detection techniques for beam-type structures. Unlike many other vibration-based damage detection methods, in which the mode shapes are often chosen to retrieve damage information, the uniform load surface (ULS) is employed in this study due to its less sensitivity to ambient noise. In combination with the ULS, two new damage detection algorithms, i.e., the generalized fractal dimension (GFD) and simplified gapped-smoothing (SGS) methods, are proposed. The GFD method is developed by modifying the conventional definition of fractal dimension. By using a moving window, the GFD of ULS can be obtained for each sampling point, and due to the irregularity of ULS introduced by the damage, a peak exists on the GFD curve indicating the location of the damage. Not only does such a peak at the GFD curve locate the damage, but also it reveals the relative size of the damage. The SGS method is also proposed to take advantage of the simple deformation shape of ULS. Both methods are then applied to the ULS of cracked and delaminated beams obtained analytically, from which the damage location and size are determined successfully. Based on the experimentally measured curvature mode shapes, both the GFD and SGS methods are further applied to detect three different types of damage in carbon/epoxy composite beams. The successful detection of damage in the composite beams demonstrates that the new techniques developed in this study can be used efficiently and effectively in damage identification and health monitoring of beam-type structures.

Keywords

structural health monitoring damage detection algorithm generalized fractal dimension simplified gapped smoothing method vibration mode shapes composites delamination crack

Get full access to this article

View all access options for this article.

References

Carden, E.P. and Fanning, P. (2004). Vibration based condition monitoring: a review . Structural Health Monitoring, 3(4), 355—377.

Doebling, S.W. , Farrar, C.R. and Prime, M.B. (1998). A summary review of vibration-based damage identification methods. The Shock and Vibration Digest, 30(2), 91—105.

Hadjileontiadis, L.J. , Douka, E. and Trochidis, A. (2005). Fractal dimension analysis for crack identification in beam structures. Mechanical Systems and Signal Processing, 19(3), 659—674.

Hamey, C.S. (2003). Dynamic response-based damage detection of composite structures using smart materials. MS Thesis, Akron, OH : The University of Akron.

Hamey, C.S. , Lestari, W. , Qiao, P. and Song, G. (2004). Experimental damage identification of carbon/epoxy composite beams using curvature mode shapes. Structural Health Monitoring, 3(4), 333—353.

Katz, M.J. (1988). Fractal and the analysis of waveforms. Computers in Biology and Medicine, 18(3), 145—156.

Mandelbrot, B.B. (1967). How long is the coast of Britain? Statistical self-similarity and fractal dimension. Science, 155, 636—638.

Paipetis, S.A. and Dimarogonas, A.D. (1986). Analytical Methods in Rotor Dynamics. London: Elsevier Applied Science.

Ratcliffe, C.P. and Bagaria, W.J. (1998). A vibration technique for locating delamination in a composite beam. AIAA J., 36(6), 1074—1077.

10.

Quek, S. , Wang, Q. , Zhang, L. and Ang, K. (2001). Sensitivity analysis of crack detection in beams by wavelet technique. International Journal of Mechanical Science, 43(12), 2899—2910.

11.

Wang, B.T. and Wang, C.C. (1997). Feasibility analysis of using piezoceramic transducers for cantilever beam model testing. Smart Materials and Structures , 6(1), 106—116.

12.

Wang, J. and Qiao, P. (2005). Vibration of beams with arbitrary discontinuities and boundary conditions. Journal of Sound and Vibration, accepted.

13.

Wang, Q. and Deng, X. (1999). Damage detection with spatial wavelets. International Journal of Solids and Structures, 36(23), 927—939.

14.

Wu, D. and Law, S.S. (2004). Damage localization in plate structures from uniform load surface curvature. Journal of Sound and Vibration, 276(1—2), 227—244.

15.

Zhang, Z. and Aktan, A.E. (1998). Application of modal flexibility and its derivatives in structural identification. Research in Nondestructive Evaluation, 10(1), 43—61.