A first approach to a rapid and cost-effective health monitoring system for composite structures is presented. Relatively small piezoceramic patches have been selected for the generation and reception of the fundamental anti-symmetric Lamb mode, A0. The patches were distributed in a linear array in order for larger areas to be inspected. The propagation of Lamb waves was studied using Finite Element analysis and the optimal number and spacing of the transmitters was determined. Impact damage was successfully detected in multidirectional carbon fibre-reinforced plastic (CFRP) laminates using a very simple experimental set-up.
Get full access to this article
View all access options for this article.
References
1.
1. Heida, J.H., Konijnenberg, P. and ’tHart, W.G.J. (1995). Characterization of impact damage in carbon-epoxy composites. In: Williams, J.G. and Pavan, A. (eds.), Impact and dynamic fracture of polymers and composites, (pp. 359–370). Mech. Eng. Publications, London , ESIS 19.
2.
2. Cawley, P. (1994). The rapid non-destructive inspection of large composite structures . Composites, 25(5): 351–357 .
3.
3. Bar-Cohen, Y. (1999). In-service NDE of aerospace structures – emerging technologies and challenges at the end of the 2nd millennium . NDT.net, 4(9): 1–21 .
5. Viktorov, I.A. (1967). Rayleigh and Lamb waves, physical theory and applications. New York: Plenum Press .
6.
6. Lamb, H. (1917). On waves in an elastic plate . Proc. Royal Soc. London, pp. 114–128 .
7.
7. Alleyne, D.N. and Cawley, P. (1992). Optimization of lamb wave inspection techniques . NDT & E International, 25(1): 11–22 .
8.
8. Birt, E.A. (1998). Damage detection in carbon-fibre composites using ultrasonic Lamb waves .Insight, 40(5): 335–339 .
9.
9. Guo, N. and Cawley, P. (1994). Lamb wave reflection for the quick nondestructive evaluation of large composite laminates . Materials Evaluation, 52(3): 404–411 .
10.
10. Maslov, K. and Kundu, T. (1997). Selection of Lamb modes for detecting internal defects in composite laminates . Ultrasonics, 35(2): 141–150 .
11.
11. Percival, W.J. and Birt, E.A. (1997). A study of Lamb wave propagation in carbon-fibre composites . Insight, 39(10): 728–735 .
12.
12. Wilcox, P., Lowe, M. and Cawley, P. (2000). Lamb and SH wave transducer arrays for the inspection of large areas of thick plates. In: Thompson, D.O. and Chimenti, D.E. (eds.), Review of progress in quantitative nondestructive evaluation, (pp. 1049–1056). New York: Plenum Press .
13.
13. Díaz Valdés, S.H. and Soutis, C. (2000). Health monitoring of composites using Lamb waves generated by piezoelectric devices . Plastics, Rubber and Composites, 29(9): 475–481 .
14.
14. Díaz Valdés, S.H. and Soutis, C. (2002). Real-time nondestructive evaluation of fibre composite laminates using low-frequency lamb waves . J. Acoust. Soc. Am., 111(5): 2026–2033 .
15.
15. Monkhouse, R.S.C., Wilcox, P.D. and Cawley, P. (1997). Flexible interdigital PVDF transducers for the generation of Lamb waves in structures . Ultrasonics, 35(7): 489–498 .
16.
16. Wilcox, P.D., Cawley, P. and Lowe, M.J.S. (1998). Acoustic fields from PVDF interdigital transducers . IEE Proc.- Sci. Meas. Technol., 145(5): 250–259 .
17.
17. Giurgiutiu, V., Bao, J. and Zhao, W. (2001). Active sensor wave propagation health monitoring of beam and plate structures . In: Davis, L.V. (ed.), Proc. SPIE’s Smart Structures and Materials 2001: Smart Structures and Integrated Systems, 4327: 234–245 .
18.
18. Kessler, S.S., Spearing, S.M. and Soutis, C. (2002). Damage detection in composite materials using Lamb wave methods . Smart Materials and Structures, 11(2): 269–278 .
19.
19. ABAQUS, Theory Manual, Version 5.8, U.S.A.
20.
20. Diamanti, K., Hodgkinson, J.M. and Soutis, C. (2002). Damage detection of composite laminates using PZT generated lamb waves . In: Balageas, D. (ed.), Proceedings of the First European Workshop on Structural Health Monitoring (pp. 398–405 ), Paris, France, DESTech Publications Inc., USA.
