A New Fiber Optic Based Method for Delamination Detection in Composites

Abstract

The early detection of closed delamination is important for ensuring the safety of laminated composite structures. In this article, an approach for delamination detection using fiber-optic interferometric technique is introduced. The integral strain along a fiber that is surface-attached to the composite is measured as a function of load position. By comparing the integral strain versus load position curve (or its first or second derivatives) for the undamaged and delaminated cases, the delamination location and size can be determined. To demonstrate the feasibility of the technique, numerical and experimental investigations have been carried out. The results of the study indicate that the proposed technique is applicable for delamination detection in both simply supported beams and beams on elastic foundation.

Get full access to this article

View all access options for this article.

References

1. Bathe, K.J. and Chaudhary, A. (1984). On finite element analysis of large deformation frictional contact problems. In: Kardestuncer, H. (ed.), Unification of Finite Element Methods, North-Holland, Amsterdam .

2. Bathe, K.J. and Chaudhary, A. (1985). A solution method for planar and axisymmetric contact problems . Int. J. Num. Meth. in Eng., 21, 65-88 .

3. Crane, R.M. and Gagorik, J. (1984). Fiber optics for a damage assessment system for fiber reinforced plastic composite structures , Quantitative NDE, 28, 1419-1430 .

4. Desai, C.S. (1979). Elementary finite element method, Englewood Cliffs, N.J.: Prentice Hall .

5. Elvin, N. (1998). Subsurface damage detection using a novel fiber optic sensing technique. PhD Thesis, Massachusetts Institute of Technology.

6. Elvin, N. and C.K.Y. Leung. (1997). Feasibility study of delamination detection with embedded optical fibers . J. Intell. Matls. Sys. & Struct., 8(10), 824-828 .

7. Elvin, N., Leung, C.K.Y., Sudarshanam, V.S. and Ezekiel, S. (1999). A novel fiber optic delamination detection scheme: theoretical and experimental feasibility studies . J. Intell. Matls. Sys. & Struct., 10(4), 314-321 .

8. Eterovic, A. and Bathe, K.J. (1991). On the treatment of inequality constraints arising from contact conditions in finite element analysis . J. Computers & Structures, 40(2), 203-209 .

9. Glossop, N.D.W., Dubois, S., Tsaw, W., Leblanc, M., Lymer, J., Measures, R.M. and Tennyson, R.C. (1990). Optical fibre damage detection for an aircraft composite leading edge . Composites, 21(1), 71-80 .

10.

10. Hofer, B. (1987). Fiber optic damage detection in composite structures . Composites, 18(4), 309-316 .

11.

11. Liu, Kexing and Measures, Raymond M. (1992) Signal processing techniques for interferometric fiber-optic strain sensors . J. of Intell. Mater. Syst. And Struct., 3.

12.

12. Failes, Michael (Jan 28, 1997) Noise compensated interferometric measuring device and method using signal and reference interferometers. Unite States Patent, Patent Number: 5,598,264.

13.

13. Sirkis, J.S. and Haslach, H.W. (1990). Interferometric strain measurement by arbitrarily configured, surface-mounted optical fiber . J. of Ltwv. Tech., 8, 1497-1503 .