In the framework of the German Collaborative Research Center CRC 880: Fundamentals of High Lift for Future Civil Aircraft porous materials as a means towards the reduction of airfoil trailing edge noise are investigated. At DLR, both experimental and numerical approaches are pursued to understand the physics behind the noise reduction. The present paper focuses on the numerical investigations, for which the experimental data serves as an evaluation basis. From the analysis of homogeneous materials, first steps are made towards the design of aeroacoustically tailored materials. It is assumed that materials with locally varying permeability may be suitable to achieve maximum noise reduction, as they provide a smooth transition from the solid airfoil to the free flow in the wake. The simulation results support this understanding, however it is revealed that high local gradients in the material properties themselves may act as acoustic sources.
HaydenREChanaudRC. Foil structures with reduced sound generation, US Patent 3853428, USA, 1974.
15.
HerrMRossignolK-SDelfsJ, et al. Specification of porous materials for low-noise trailing-edge applications. In: AIAA AVIATION forum, 20th AIAA/CEAS aeroacoustics conference, Atlanta, GA, USA, 16--20 June 2014.
16.
GeyerTSarradjEFritzscheC.Measurement of the noise generation at the trailing edge of porous airfoils. Exp Fluids2010;
48: 291–308.
17.
SchulzeJSesterhennJ.Optimal distribution of porous media to reduce trailing edge noise. Comput Fluids2013;
78: 41–53.
18.
BaeYMoonYJ.Effect of passive porous surface on the trailing-edge noise. Phys Fluids2011;
23: 126101.
19.
JiangCMoreauDYauwenasY, et al. Control of rotor trailing edge noise using porous additively manufactured blades. In: 2018 AIAA/CEAS aeroacoustic conference,2018.
20.
FaßmannBWDelfsJWEwertR, et al. Reduction of emitted sound by application of porous trailing edges. SFB 880 – fundamentals of high-lift for future commercial aircraft. Biennial Report, 2013.
21.
Rubio CarpioAMerino MartínezRAvalloneF, et al.
Experimental characterization of the turbulent boundary layer over a porous trailing edge for noise abatement. J Sound Vib2019;
443: 537–558.
22.
TerunaCManegarFAvalloneF, et al.
Noise reduction mechanisms of an open-cell metal-foam trailing edge. J Fluid Mech2020;
898.
23.
AliSASAzarpeyvandMda SilvaCRI.Trailing-edge flow and noise control using porous treatments. J Fluid Mech2018;
850: 83–119.
24.
KohSRyong MeinkeMSchroederW.Numerical analysis of the impact of permeability on trailing-edge noise. J Noise Vib2018;
421: 348--376.
25.
TychsenJLippitzNRöslerJ.Modification of porous aluminum by cold rolling for low-noise trailing edge applications. Metals2018;
8: 598.
26.
RautmannCDierkeJEwertR, et al. Generic airfoil trailing-edge noise prediction using stochastic sound sources from synthetic turbulence. In: AIAA AVIATION forum, 20th AIAA/CEASaeroacoustics conference, Atlanta, GA, USA, 16--20 June 2014.
27.
MößnerMRadespielR.Flow simulations over porous media – comparisons with experiments. Comput Fluids2017;
154: 358–370.
28.
MößnerMRadespielR.Modeling of turbulent flow over porous media using a volume averaging approach and a Reynolds stress model. Comput Fluids2015;
108: 25–42.
29.
EwertR. RPM – the fast random particle-mesh method to realize unsteady turbulent sound sources and velocity fields for CAA applications. In: 13th AIAA/CEAS aeroacoustics conference (28th AIAA aeroacoustics conference), Rome, Italy, 21--23 May 2007.
30.
DelfsJWBauerMEwertR, et al. Numerical simulation of aerodynamic noise with DLR's aeroacoustic code PIANO, https://elib.dlr.de/118928/ (2008, accessed 20 August 2020).
31.
EwertRSchröderW.Acoustic perturbation equations based on flow decomposition via source filtering. J Comput Phys2003;
188: 365–398.
32.
FaßmannBWRautmannCEwertR, et al. Prediction of porous trailing edge noise reduction via acoustic perturbation equations and volume averaging. In: AIAA AVIATION forum, 21st AIAA/CEAS aeroacoustics conference, Dallas, TX, USA, 22--26 June 2015.
33.
KutscherKGeierMKrafczykM.Multiscale simulation of turbulent flow interacting with porous media based on a massively parallel implementation of the cumulant lattice Boltzmann method. Comput Fluids2019;
193: 103733.
34.
LippitzNBlechCLangerS, et al.
Identification of material parameters for the simulation of acoustic absorption of fouled sintered fiber felts. Materials2016;
9: 709.
ForchheimerP.Wasserbewegung durch boden. Z Des Vereins Deutscher Ingenieure1901;
45: 50.
37.
RossianLEwertRDelfsJ. Evaluation of acoustic jump conditions at discontinuous porous interfaces. In: AIAA AVIATION forum, 23rd AIAA/CEAS aeroacoustics conference, Denver, CO, USA, 5--9 June 2017.
38.
RossianL.Minderung der Schallabstrahlung von aktiven Hochauftriebssystemen mit porösen Materialien. Doctoral Thesis, Technische Universität Braunschweig, Deutsches Institut für Luft- und Raumfahrt e.V, 2020.
39.
AmietR.Noise due to turbulent flow past a trailing edge. J Sound Vib1976;
47: 387–393.
40.
EwertRAppelCDierkeJ, et al. RANS/CAA based prediction of NACA 0012 broadband trailing edge noise and experimental validation. In: 15th AIAA/CEAS aeroacoustics conference (30th AIAA aeroacoustics conference), Miami, FL, USA, 11--13 May 2009.
41.
HerrM.Trailing-edge noise- reduction concepts and scaling laws. Doctoral Thesis, Technische Universität Braunschweig, Deutsches Institut für Luft- und Raumfahrt e.V., 2013.
42.
RossianLEwertRDelfsJW. Prediction of airfoil trailing edge noise reduction by application of complex porous material. In: Andreas D, Stephan B, Gerd H, Rolf R, Ewald K, Richard S, Claus W (eds) New results in numerical and experimental fluid mechanics XI, Germany: Springer International Publishing, 2018, pp. 647–657.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
