This paper investigates the role of accelerated ageing tests on the mechanical properties of two affordable glass fibre-reinforced polymers. The study considers a biaxial (± 45) stitched E-glass and a twill weave woven roving E-glass fabrics combined with an epoxy matrix. A set of mechanical tests is carried out to evaluate the impact, compression after impact, tensile, flexural and interlaminar fracture behaviour of both materials for dry and aged specimens, following the recommendations of established standards. The novelty of this paper lies in the evaluation of the degradation of the mechanical properties of affordable marine composites under accelerated ageing tests for wave energy purposes. The results demonstrate that these materials can withstand long-term exposure to the harsh ocean environments where wave energy converters are deployed. While the stitched fabric laminates exhibited a more ductile response, the woven roving laminates were brittle but demonstrated a greater capacity to maintain their integrity against low-velocity impacts. Lastly, recommendations for implementing these materials for specific components of wave energy converters are provided, based on both mechanical test results and affordability.
MouritzAPGellertEBurchillP, et al. Review of advanced composite structures for naval ships and submarines. Compos Struct2001; 53: 21–42.
2.
HåkanssonMJohnsonERingsbergJW. Cost and weight of composite ship structures: a parametric study based on Det Norske Veritas rules. Proc Inst Mech Eng M J Eng Marit Environ2018; 232: 331–350.
3.
Guedes SoaresCBhattacharjeeJTelloM, et al. Review and classification of wave energy converters. In: SoaresGGarbatovYSutuloS, et al. (ed.) Maritime Engineering and Technology. Taylor & Francis Group, 2012, pp.585–594.
4.
BlommaertC. Composite floating ‘point absorbers’ for wave energy converters: survivability design, production method and large-scale testing. PhD Thesis, Ghent University Faculty of Engineering, 2010.
5.
Van PaepegemWBlommaertCDe BaereI, et al. Slamming wave impact of a composite buoy for wave energy applications: design and large-scale testing. Polym Compos2011; 32: 700–713.
MarquisLKramerMFrigaardP. First Power Production figures from the Wave Star Roshage Wave Energy Converter. In: 3rd International Conference on Ocean Energy, Bilbao, 2010, pp.1–5.
8.
CalvárioMLiZGuedes SoaresC. Buckling strength of a composite material wave energy converter structure under slamming loads. Ocean Eng2021; 241: 110044.
9.
CalvárioMWangSGuedes SoaresC. Hydroelastic study on the water impact of point absorbers made of composite materials. Ocean Eng2024; 296: 116979.
10.
CalvárioMXuHTWangS, et al. Impact of a tri-dimensional conical structure made of composite materials. Ocean Eng2025; 315: 119817.
11.
CalvárioMSutherlandLSGuedes SoaresC. A review of the applications composite materials in wave and tidal energy devices. In: GuedesSCTeixeiraA (eds) Maritime transportation and harvesting of sea resources. Taylor & Francis Group, 2018, pp.695–701.
12.
DaviesPLe GacP-YLe GallM, et al. Durability of polymers and composites: the key to reliable marine renewable energy production. In: Proceedings of the ASME 2018 37th international conference on ocean, offshore and arctic engineering, 2018, pp.1–9.
13.
ISO 11346. Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use. International Organization for Standardisation, 2023.
14.
AlizadehFGuedes SoaresC. Influence of long-term moisture exposure and impact damage on the residual compressive strength of glass-reinforced vinylester. Compos Struct2021; 260: 113525.
15.
DaviesP. Environmental degradation of composites for marine structures: new materials and new applications. Philos Trans A Math Phys Eng Sci2016; 374: 20150272.
16.
BoisseauADaviesPThiebaudF. Sea water ageing of composites for ocean energy conversion systems: influence of glass fibre type on static behaviour. Appl Compos Mater2012; 19: 459–473.
17.
TualNCarrereNDaviesP, et al. Characterization of sea water ageing effects on mechanical properties of carbon/epoxy composites for tidal turbine blades. Compos Part A Appl Sci Manuf2015; 78: 380–389.
18.
DawsonMDaviesPHarperP, et al. Effects of conditioning parameters and test environment on composite materials for marine applications. In: SAMPE Europe - Second fall conference and exhibition. Liege, 2016.
19.
GhabeziPHarrisonNM. Multi-scale modelling and life prediction of aged composite materials in salt water. J Reinforced Plast Compos2024; 43: 205–219.
20.
NanJZhiCMengJ, et al. Seawater aging effect on fiber-reinforced polymer composites: mechanical properties, aging mechanism, and life prediction. Text Res J2023; 93: 3393–3413.
21.
AlizadehFKharghaniNGuedes SoaresC. Effect of long-term moisture exposure on impact response of glass-reinforced vinylester. Proc Inst Mech Eng M J Eng Marit Environ2021; 235: 854–865.
22.
DominguesJSutherlandLSGarridoM. Durability of flax and glass fibre reinforced epoxy laminates for marine applications. In: GuedesSCSantosT (eds) Advances in maritime technology and Engineering. Taylor & Francis Group, 2024, pp.375–383.
23.
DaviesGAOHitchingsDZhouG. Impact damage and residual strengths of woven fabric glass/polyester laminates. Composites1996; 27: 1147–1156.
24.
DaleMAchaBACarlssonLA. Low velocity impact and compression after impact characterization of woven carbon/vinylester at dry and water saturated conditions. Compos Struct2012; 94: 1582–1589.
25.
CaldwellRLDaviesPArhantM, et al. Compression and hydrothermal ageing after impact of carbon fibre reinforced epoxy laminates. Compos Part A: Appl Sci Manuf2024; 184: 108258.
26.
ThorssonSISringeriSPWaasAM, et al. Experimental investigation of composite laminates subject to low-velocity edge-on impact and compression after impact. Compos Struct2018; 186: 335–346.
27.
LiMLiSZhangH, et al. Multiscale modelling of dynamic progressive failure for CFRP laminates with voids subjected to low-velocity impact. Compos Part A Appl Sci Manuf2025; 190: 108649.
28.
GonzálezEVMaimíPCamanhoPP, et al. Simulation of drop-weight impact and compression after impact tests on composite laminates. Compos Struct2012; 94: 3364–3378.
29.
RozyloPDebskiHKubiakT. A model of low-velocity impact damage of composite plates subjected to compression-after-impact (CAI) testing. Compos Struct2017; 181: 158–170.
30.
KharghaniNAlizadehFSoaresCG, et al. Experimental and numerical study of a composite-to-steel joint under bending and torsion loads. Proc Inst Mech Eng M J Eng Marit Environ2019; 233: 722–734.
31.
ProdromouMDowRS. Experimental analysis of polymer-composite coated steel components under quasi-static loading. Proc Inst Mech Eng M J Eng Marit Environ2025; 239: 924–939.
32.
CalvárioMGuedes SoaresC. Numerical and experimental study on the mechanical strength of glass/epoxy laminates. Submitted to Proc Inst Mech Eng M J Eng Marit Environ 2026.
Sicomain. SR 8100/SD 882X Infusion System, www.sicomin.com (2019).
36.
ASTM D5229/D5229M. Standard test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials. ASTM International, 2014.
37.
ASTM D7136/D7136M. Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event. ASTM International, 2015.
38.
ASTM D7137/D7137M. Standard test method for compressive residual strength properties of damaged polymer matrix composite plates. ASTM International, 2012.
39.
SutherlandLS. A review of impact testing on marine composite materials: Part III - damage tolerance and durability. Compos Struct2018; 188: 512–518.
40.
ISO 527-1. Plastics - determination of tensile properties - Part 1: general principles. International Organization for Standardisation, 2012.
41.
ISO 527-4. Plastics - determination of tensile properties - part 4: test conditions for isotropic and orthotropic fibre-reinforced plastic composites. International Organization for Standardisation, 1997.
42.
ASTM D 7264/D 7264M. Standard Test Method for flexural properties of polymer matrix composite materials. ASTM International, 2007.
43.
CarlssonLAAdamsDFByron PipesR (eds). Experimental characterization of advanced composite materials. 4th ed. CRC Press Taylor & Francis Group, 2014.
44.
SutherlandLSGuedes SoaresC. Impact characterisation of low fibre-volume glass reinforced polyester circular laminated plates. Int J Impact Eng2005; 31(1): 1–23.
45.
de MouraMFSFde MoraisAB. Equivalent crack based analyses of ENF and ELS tests. Eng Fract Mech2008; 75: 2584–2596.
