Effect of preload scatter on fatigue life of subsea pipeline connector bolts located at suspended span section

Abstract

The subsea pipeline connector (SPC) located at suspended span section not only bears the internal pressure from the oil and nature gas of the pipeline, but also needs to withstand the periodic drag force generated by vortex-induced vibration (VIV). This situation may cause fatigue failure of the flange connector fastening bolts. Reasonable preload value can reduce the fatigue stress and improve the fatigue life of the SPC bolts. This paper establishes a calculation model of the SPC drag force under VIV located at suspended span section. Normal distribution function is used to establish random models of preload for corner control pretension method and hydraulic tension pretension method considering the scatter of the preload value. On this basis, the stochastic finite element model (S-FEM) of SPC bolts is established to analyze bolts force under random preload considering VIV. The regression equation of strain-life for smooth fatigue specimens of bolt materials is applied to obtain preload-fatigue life curves of SPC bolts under different pretension methods. Then it is used to analyze the preload scatter on fatigue life of SPC bolts located at suspended span section. The analysis results indicate that the fatigue life dispersion of SPC bolts pre tightened by hydraulic tension pretension method is smaller compared with the corner control pretension method. Compared with the preload value determined by ASME code, increasing the SPC bolts preload appropriately can improve the fatigue life of SPC fastening bolts located at suspended span section.

Keywords

Vortex-induced vibration subsea pipeline flange bolt fatigue life suspended span

Get full access to this article

View all access options for this article.

References

Ouyang

Tang

Shavandi

, et al. Risk based verification for subsea pipeline repair connectors and a case study. In: Offshore technology conference, Houston, Texas, USA, May 2023, OTC-32412-MS.

Cao

Zhang

Sun

, et al. Strength analysis of the interference joint of the oval submarine pipeline to the mechanical connector. Appl Ocean Res 2020; 101: 102229.

Zeng

Song

Ren

, et al. Stochastic model of sub-sea connector sealing performance degradation based on Gamma process. Sci Technol Eng 2019; 19(4): 110–114.

Yun

Wang

Yan

, et al. Analysis of sealing and leakage performance of the subsea collet connector with lens-type sealing structure. J Mar Sci Eng 2020; 8(6): 444.

Zhao

Wang

, et al. Metal sealing mechanism and experimental study of the subsea wellhead connector. J Braz Soc Mech Sci Eng 2020; 42(1): 26.

Wang

, et al. Research on bearing capacity and sealing contact characteristics of the subsea wellhead connector. Proc IMechE, Part M J Eng Maritime Environ 2023; 237(1): 153–165.

Wang

Liu

, et al. An assessment method of sealing performance and stress intensity factors at crack tip of subsea connector metal sealing rings. Energies 2022; 15(13): 4680.

Wei

Liu

SL.

Analysis of safe span length and fatigue life of submarine pipelines. China Ocean Eng 2020; 34(1): 119–130.

Zhang

Leung

Chow

YK.

Pipe–soil interaction on free-span shoulder subject to vortex-induced vibration. Can Geotech J 2020; 57(11): 1704–1718.

10.

Peek

Nonlinear span assessment by amplitude-dependent linearization. J Offshore Mech Arctic Eng 2020; 142(5): 1–18.

11.

Shabani

Goudarzi

, et al. Probabilistic modelling of free spanning pipelines considering multiple failure modes. Eng Fail Anal 2019; 106: 104169.

12.

Bickford

Oliver

(eds). Introduction to the design and behavior of bolted joints: non-gasketed joints. 5th ed. Boca Raton: CRC Press, 2022.

13.

Zeng

Xue

Sun

, et al. Sealing reliability assessment of deep-water oil and nature gas pipeline connector considering thermo-mechanical coupling. Proc IMechE, Part M: J Engineering for the Maritime Environment 2022; 236(1): 196–208.

14.

Liu

Yun

Jiao

, et al. Structural analysis and experimental study on the spherical seal of a subsea connector based on a non-standard O-ring seal. J Mar Sci Eng 2022; 10(3): 404.

15.

Liu

Gao

FP.

Evaluation for allowable span length of a submarine pipeline considering VIV hysteresis effect. Int J Offshore Polar Eng 2021; 31(3): 325–332.

16.

Jia

, et al. Multispan classification methods and interaction mechanism of submarine pipelines undergoing vortex-induced vibration. Appl Ocean Res 2022; 120: 103027.

17.

Gao

Liao

Analysis of VIV-induced fatigue characteristic of spanning pipelines with asymmetric boundary. Journal of Harbin Engineering University 2019; 40(5): 960–966.

18.

Guo

Vortex-induced vibrations of a free spanning pipeline with slug flow. Shock Vib 2022; 41(6): 37–43.

19.

American Society of Mechanical Engineers. Boiler and pressure vessel code. ASME-BPVC-VIII-1, 2021.

20.

Yan

Xuedong

Zhichao

, et al. Experimental research on the gasket parameters of flange sealing structure based on leakage rate. J Mech Eng 2020; 56(21): 168–176.

21.

Luo

Shi

Zhang

, et al. Variation law of preload of bolted joint in tightening process. J Northeast Univ 2023; 44(2): 215–222.

22.

Wang

, et al. Research on visual detection method of rail vehicle bolt looseness and pre-tightening force. J Railw Sci Eng 2023; 20(9): 3511–3524.

23.

Editorial Committee of the Mechanical Engineering Material Performance Data Manual. Mechanical engineering material performance data manual. Beijing: China Machine Press, 1995.