Sage Journals: Discover world-class research

Abstract

Stepped planning hulls are commonly used on fast planning boats and water-based aircraft, but numerical means for simulating their hydrodynamics are rather limited. In this study, a panel method involving hydrodynamic sources has been applied for modeling a stepped planning hull and accounting for water surface deformations in the air-ventilated cavity and surrounding water domain. Parametric calculations have been carried out for a selected hull with variable deadrise angles and at two speed regimes. Results are shown for the boat attitude, lift–drag ratio, and drag components. The variations of the wetted surfaces on two bodies of a stepped hull are also presented and related to variations in hydrodynamic characteristics of the hull.

Keywords

Planning boat stepped hull potential flow

Get full access to this article

View all access options for this article.

References

Matveev

. Application of artificial cavitation for reducing ship drag. Ocean Eng Int 2005; 9: 35–41.

Doctors

. Representation of planning surfaces by finite pressure elements. In: Proceedings of 5th Australian conference on hydraulics and fluid mechanics, Christchurch, New Zealand, 9–13 December 1974. Sydney, NSW, Australia: University of New South Wales.

Wellicome

Jahangeer

. The prediction of pressure loads on planning hulls in calm water. Trans R Inst Nav Archit 1978; 121: 53–70.

Garland

Maki

. A numerical study of a two-dimensional stepped planning surface. J Ship Prod Des 2012; 28: 60–72.

Matveev

. Two-dimensional modeling of stepped planning hulls with open and pressurized air cavities. Int J Nav Archit Ocean Eng 2012; 4: 162–171.

Faltinsen

. Hydrodynamics of high-speed marine vehicles. New York: Cambridge University Press, 2005.

Savitsky

Morabito

. Surface wave contours associated with the forebody wake of stepped planning hulls. Mar Technol 2010; 47: 1–16.

Matveev

Ockfen

. Modeling of hard-chine hulls in transitional and early planning regimes by hydrodynamic point sources. Int Shipbuild Prog 2009; 56: 1–13.

Bertram

. Practical ship hydrodynamics. Oxford: Butterworth-Heinemann, 2000.

10.

Knapp

Daily

Hammit

. Cavitation. New York: McGraw-Hill, 1970.

11.

Wang

Rispin

. Three-dimensional planning at high Froude number. J Ship Res 1971; 15: 221–230.

12.

Matveev

Burnett

Ockfen

. Study of air-ventilated cavity under model hull on water surface. Ocean Eng 2009; 36: 930–940.

13.

Matveev

. Transom effect on properties of air cavity under flat-bottom hull. Ship Offshore Struct 2012; 7: 143–149.

14.

Hirdaris

Bai

Dessi

. Loads for use in the design of ships and offshore structures. Ocean Eng 2014; 78: 131–174.

Effect of deadrise angles on hydrodynamic performance of a stepped hull

Abstract

Keywords

Get full access to this article

References