Influence of a quadratic power take-off on the behaviour of a self-contained inertial referenced wave energy converter

Abstract

This paper describes a non-linear power take-off system within a buoyant heaving wave energy converter. The power take-off uses the relative velocity between the main structure of the wave energy converter and an inertial referenced mass contained within its outer envelope. The power take-off consists of a linear spring and a quadratic damper. In this paper the mathematical principles behind a working time domain simulation of a non-linear power take-off as applied to a relative motion inertial referenced wave energy converter are presented. The principles could, however, be applied to any differential motion system. The resulting numerical simulation is used to investigate the performance of a representative system in irregular waves, and the methodology necessary to determine optimal power extraction is discussed and applied. ‘Optimisation’ of the power take-off parameters is discussed with respect to limiting the overall relative motion and large accelerations, as indicators of the expected lifetime and the maintenance requirements of the wave energy converter.

Keywords

Wave energy converters point absorbers Cummins convolution Prony method non-linear hydraulic system power take-off

Get full access to this article

View all access options for this article.

References

International Energy Agency implementing agreement on ocean energy systems. Annual Report, IEA-OES Executive Committee, Lisboa, Portugal, 2007.

French

. Tadpole: a design problem the mechanics of the use of sea wave energy. Proc IMechE Part A: J Power and Energy 1996; 210(4): 273–277.

Falcão

AFDO

. Modelling and control of oscillating-body wave energy converters with hydraulic power take-off and gas accumulator. Ocean Engng 2007; 34(14–15): 2021–2032.

Cummins

. The impulse response function and ship motions. In: Symposium on ship theory, Hamburg, Germany, 25–27 January 1962; Schiffstechnik 1962; 9: 101–109.

Jefferys

. Simulation of wave power devices. Appl Ocean Res 1984; 6(1): 31–39.

Duclos

Clement

Chatry

. Absorption of outgoing waves in a numerical wave tank using a self-adaptive boundary condition. Int J Offshore Polar Engng 2001; 11(3): 168–175.

Babarit

Clement

. Optimal latching control of a wave energy device in regular and irregular waves. Appl Ocean Res 2006; 28(2): 77–91.

Greenhow

MJL

. Approximate models of a heaving sphere with linear and non-linear power take-off mechanisms. Appl Ocean Res 1982; 4(3): 160–164.

Babarit

Clément

Gilloteaux

J-C

. Optimization and time-domain simulation of the SEAREV wave energy converter. In: 24th international conference on offshore mechanics and arctic engineering, Halkidiki, Greece, 12–17 June 2005, vol. 2, pp.703–712. New York: ASME.

10.

Eidsmoen

. Optimum control of a floating wave-energy converter with restricted amplitude. Trans ASME, J Offshore Mech Arctic Engng 1996; 118(2): 96–102.

11.

Grilli

Merrill

Grilli

Spaulding

Cheung

. Experimental and numerical study of spar buoy-magnet/spring oscillators used as wave energy absorbers. In: 17th (2007) international offshore and polar engineering conference, Lisbon, Portugal, 1–6 July 2007, vol. I, pp.489–496. Cupertino, California: International Society of Offshore and Polar Engineers.

12.

Bailey

Bryden

. Experimental testing on the effect of nonlinear power take off on the motions of wave energy converters. In: 2nd international conference on ocean energy, Brest, France, 15–17 October 2008.

13.

Falnes

. Wave-energy conversion through relative motion between two single-mode oscillating bodies. Trans ASME, J Offshore Mech Arctic Engng 1999; 121(1): 32–38.

14.

WAMIT Inc. WAMIT user manual version 6.0, 6.0PC, 5.3S, 2000.

15.

Rogers

King

. Wave generation using ocean and wave. Edinburgh Designs Ltd manual, version 3.62, 1997.

16.

Goryacheva

. Contact mechanics in tribology, Solid mechanics and its applications, vol. 61. Dordrecht: Kluwer, 1998, xiii, 344 pp.

17.

Callister

. Materials science and engineering: an introduction. 5th ed. New York: John Wiley, 2000, xxi, 871 pp.