The grounding grid is an important component of the substation, and its corrosion will directly influence the safe operation of the power system. In order to overcome the limitations of traditional corrosion diagnosis methods, the corresponding corrosion diagnosis equations model was constructed by using electric network theory. Considering the limited number of measurable nodes in the actual substation, which leads to the characteristics of high-dimensional underdetermination of the equations, an improved RMSProp-Lookahead hybrid optimization algorithm was proposed to solve the problem. The method combined the Gradient normalization mechanism and the Lookahead dual update strategy, optimized the hyperparameter configuration through grid search, and improved the convergence speed and global search capability of the optimization process. The simulation and experimental results showed that the method can effectively locate the corrosion branch, accurately judge the corrosion degree, and significantly improved the diagnostic efficiency and accuracy, which has important practical significance for the safety maintenance of the grounding network.
ZhangC. Corrosion and protection of grounding device of power equipment. Science and Technology Information (Academic Research)2007; 2007(16): 546.
2.
ChunmingL. Comparison of copper grounding network and steel grounding network in substation. China Hydropower Electrification2008; 2008(04): 49–51+44.
3.
ZhangXYangNLuoP. Measurement of corrosion rate of carbon steel grounding grid by constant current charging curve technique. Proceedings of the CSEE2010; 30(14): 90–95.
4.
GaoY. Corrosion Detection and prediction Method of grounding grid and its implementation [D]. Hunan University, 2021.
5.
XuetengL. Research on corrosion detection method of grounding grid based on electrochemistry. Electronic Design Engineering2019; 28(10): 56–59+64.
6.
MingshengH. Research on topological structure detection method of Ground Network considering electromagnetic interference [D]. Chongqing University, 2022.
7.
JiangHHeSGaoH, et al.Research progress of electromagnetic field detection technology in fault diagnosis of ground grids. J Funct Mater Devices2019; 25(03): 156–161.
8.
WeiguangTLiuLLiaoX, et al.Combined source magnetic field superposition imaging detection method for GROUND NETWORK topology. J Chongqing Univ2023; 46(11): 90–101.
9.
ZhangWZhangCLiuJ, et al.Grounding Grid Impedance Imaging Algorithm Based on Elastic Norm[J]. Transactions of China Electrotechnical Society2025; 40(03): 676–688.
10.
XingLFanYXiaoY, et al.Based on endogenous type ground net.through defect diagnosis of inverse problem of electrical impedance imaging study. Journal of Electrotechnics2019; 05: 902–909.
11.
ChenJQianZJiayuanH. Application of electrical impedance scanning imaging technology in Fault diagnosis of substation grounding network. Zhejiang Electric Power2017; 4(10): 27–30.
12.
PeiH. Fault diagnosis of grounding network in a substation in West Jiangxi based on electric network theory [D]. North China Electric Power University, 2018.
13.
LeiXLinL. Corrosion and breakpoint diagnosis method of grounding network in substation based on Electrical Network theory. Trans China Electrotech Soc2012; 27(10): 270–276.
14.
ZhongW. Research on Visual Diagnosis method of Ground grid corrosion in substation [D]. East China Jiaotong University, 2023.
15.
ChengHZhongW, et al.A corrosion diagnosis method for ground grid connected to traction substation based on Lasso theory. Journal of Railway Science2019; 46(05): 58–65.
16.
ZhanHGuoMLiuC, et al.Corrosion state evaluation method of grounding grid based on regularized least square method [J]. Corrosion and Protection, 2022, 43(06): 79-85+113.
17.
LiuYXiaoyanXYangR, et al.Detection method of grounding grid Corrosion based on Tikhonov regularization Principle. High Voltage Technology2017; 43(08): 2709–2717.
18.
DongMShiZLiX, et al.A diagnosis of grounding grid corrosion defectsbased on branch voltage disturbance. IEEE Access2020; 8: 36749–36756.
19.
Guo-chaoQYu-tangMYiM, et al.Application of genetic algorithm in corrosion fault diagnosis of ground grid. Yunnan Electric Power Technology2016; 44(02): 113–117+129.
20.
GeY. Research on some problems of intelligent optimization algorithm and application [D]. Northeastern University, 2013.
21.
YoucaiLXiaolongLLuoZ, et al.Ground netthrough corrosion diagnosis method based on improved grey Wolf algorithm. Electric Porcelain Arrester2024; 05: 100–109.
22.
YangZShenXWangK, et al.Corrosion fault location of grounding grid based on improved Sparrow Search algorithm. Comput Mod2024; 10: 14–20.
23.
WangXGaoGWuT, et al.Research on corrosion prediction of ground grid based on PSOEM optimization LSSVM. Smart Power2019; 48(11): 68–73.
24.
XiaotianASimiaoFWangY, et al.Based on intelligent optimization algorithm of traction substation ground network corrosion diagnosis. Electric Technology2024; 02: 56–59.
25.
LiuYZiTLeiC, et al.Conductor missing diagnosis of grounding grid based on binary genetic algorithm. High Voltage Technology2014; 40(05): 1439–1445.
26.
ShiWLilingXWuZW, et al.Research on the optimization of unequal spacing ground grid based on chaotic drosophila algorithm. Acta Electric Power Sinica2019; 34(05): 490–497.
27.
MaGJiangLGuchaoX. Research on corrosion diagnosis of grounding grid based on tellegen theorem. Electrical Measurement & Instrumentation2016; 53(22): 91–95.
28.
DongMLeiGDingG, et al.Design and application of fault location device for grounding network based on cyclic voltage measurement. Electric Porcelain Arrester2019; 05: 111–117.
29.
FanKWangCLiG, et al.Fault diagnosis of grounding network based on minimum energy principle. J China Three Gorges Univ (Nat Sci) 2013; 35(02): 3.
