In this study, a dual-spark ignition system was systemically evaluated in a single-cylinder engine. Since the test engine was originally based on the diesel engine, two sparks were located symmetrically on the left and right, with the diesel injector in the middle of the engine head. At first, the effect of dual-spark ignition on the combustion process was compared with the single-spark (only right used) condition under 1600 rpm/gIMEP 0.7 MPa. Also, varying excessive air ratios were evaluated for the two conditions. The second experiment changed the piston bowl shape from (a Mexican) hat to a flat (bathtub-shaped) for the dual-spark ignition system under five representative operating conditions. Also, the maximum load was verified under a knocking frequency of 30%. The results emphasized that dual-spark ignition showed superb CoV of net indicated mean effective pressure (nIMEP) as 2.71% under excessive air ratio 1.55 condition, while it was higher than 5% with single-spark ignition. In addition, the net indicated thermal efficiency was 37.33%. Also, when flat bowl-shaped piston was used with dual-spark ignition system, the maximum load with avoidance of severe knocking could be increased from nIMEP 1.07 to 1.44 MPa due to enhancing flame propagation speed.
YunHWermuthNNajtP. Extending the high load operating limit of a naturally-aspirated gasoline HCCI combustion engine. SAE Technical Paper 2010-01-0847, 2010.
4.
YunHWermuthNNajtP. High load HCCI operation using different valving strategies in a naturally-aspirated gasoline HCCI engine. SAE Technical Paper 2011-01-0899, 2011.
5.
SnyderJHansonRFitzgeraldRSteeperR. Dual-wavelength PLIF measurements of temperature and composition in an optical HCCI engine with negative valve overlap. SAE Technical Paper 2009-01-0661, 2009.
6.
FitzgeraldRSteeperR. Application of a tunable-diode-laser absorption diagnostic for CO measurements in an automotive HCCI engine. SAE Technical Paper 2010-01-2254, 2010.
7.
PuranamSSteeperR. The effect of acetylene on iso-octane combustion in an HCCI Engine with NVO. SAE Technical Paper 2012-01-1574, 2012.
8.
ChiangCJYangJLLanSY, et al. Dynamic modeling of a SI/HCCI free-piston engine generator with electric mechanical valves. Appl Energy2013; 102: 336–346.
9.
HungNBLimOIidaN. The effects of key parameters on the transition from SI combustion to HCCI combustion in a two-stroke free piston linear engine. Appl Energy2015; 137: 385–401.
10.
WiemannSHegnerRAtakanBSchulzCKaiserSA.Combined production of power and syngas in an internal combustion engine – experiments and simulations in SI and HCCI mode. Fuel2018; 215: 40–45.
11.
WaqasMUHothAKolodziejCP, et al. Detection of low temperature heat release (LTHR) in the standard cooperative fuel research (CFR) engine in both SI and HCCI combustion modes. Fuel2019; 256: 115745.
12.
KokjohnSHansonRSplitterDKaddatzJReitzR. Fuel reactivity controlled compression ignition (RCCI) combustion in light- and heavy-duty engines. SAE Technical Paper 2011-01-0357, 2011.
13.
KokjohnSReitzRSplitterDMusculusM. Investigation of fuel reactivity stratification for controlling PCI heat-release rates using high-speed chemiluminescence imaging and fuel tracer fluorescence. SAE Technical Paper 2012-01-0375, 2012.
14.
SplitterDWissinkMKokjohnSRetizR. Effect of compression ratio and piston geometry on RCCI load limits and efficiency. SAE Technical Paper 2012-01-0383, 2012.
15.
DempseyAWalkerNReitzR. Effect of piston bowl geometry on dual fuel reactivity controlled compression ignition (RCCI) in a light-duty engine operated with gasoline/diesel and methanol/diesel. SAE Technical Paper 2013-01-0264, 2013.
16.
CurranSHansonRWagnerRReitzR. Efficiency and emissions mapping of RCCI in a light-duty diesel engine. SAE Technical Paper 2013-01-0289, 2013.
17.
BenajesJPastorJVGarcíaAMonsalve-SerranoJ. The potential of RCCI concept to meet EURO VI NOx limitation and ultra-low soot emissions in a heavy-duty engine over the whole engine map. Fuel2015; 159: 952–961.
18.
BenajesJPastorJVGarcíaABoronatV. A RCCI operational limits assessment in a medium duty compression ignition engine using an adapted compression ratio. Energy Convers Manag2016; 126: 497–508.
19.
BenajesJGarcíaAMonsalve-SerranoJBoronatV. Achieving clean and efficient engine operation up to full load by combining optimized RCCI and dual-fuel diesel-gasoline combustion strategies. Energy Convers Manag2017; 136: 142–151.
20.
LeeJChuSMinK, et al. Classification of diesel and gasoline dual-fuel combustion modes by the analysis of heat release rate shapes in a compression ignition engine. Fuel2017; 209: 587–597.
21.
LeeJChuSKangJ, et al. The classification of gasoline/diesel dual-fuel combustion based on the heat release rate shapes and its application in a light-duty single-cylinder engine. Int J Engine Res2019; 20(1): 69–79.
22.
LeeJChuSLimD, et al. Comparison of combustion and emission characteristics under single-fueled and dual-fueled conditions with premixed compression ignition. Energy2022; 241: 122855.
23.
ChangKJiCWangS, et al. Numerical investigation of the synchronous and asynchronous changes of ignition timing in a double spark plugs direct injection rotary engine. Energy2023; 268: 126688.
24.
LeiQFengHLiuC, et al. Numerical investigation of the impact of dual spark plug coordinated ignition strategy on the combustion process in a free piston engine generator. Energy2024; 290: 129880.
25.
YanXFengHZuoZ, et al. Research on the influence of dual spark ignition strategy at combustion process for dual cylinder free piston generator under direct injection. Fuel2021; 299: 120911.
26.
SanliASayinCGumusMKilicaslanICanakciM. Numerical evaluation by models of load and spark timing effects on the In-cylinder heat transfer of A Si engine. Numer Heat Transf2009; 56(5): 444–458.
27.
HongBLiusAMahendarSKMihaescuMCronhjortA. Energy and exergy characteristics of an ethanol-fueled heavy-duty SI engine at high-load operation using lean-burn combustion. Appl Therm Eng2023; 224: 120063.
28.
DuanQLiTLiuD, et al. Improving the lean burn performance of a high compression ratio methanol engine by multiple-injection. Appl Therm Eng2024; 236: 121481.
29.
LiBZhongFWangRJiangYChenY.Experimental and numerical study on a SI engine fueled with gasohol and dissociated methanol gas blends at lean conditions. Energy2024; 292: 130540.
30.
LiuJDumitrescuC. Combustion partitioning inside a natural gas spark ignition engine with a bowl-in-piston geometry. Energy Convers Manag2019; 183: 73–83.
31.
Sandeep VarmaPMittalM. Investigations with bowl-in-piston (CI type) and flat-piston (SI type) geometries to study the engine characteristics of a CI engine retrofitted for SI operation with CNG fuel. Energy Convers Manag2024; 301: 118083.
