Editorial: IJER special issue of the 3rd International Conference ICCEMME-2021 focus in Engine Research

Abstract

Get full access to this article

View all access options for this article.

References

Sharma

Singh

Tyagi

Singh

Sustainability of the polanga biodiesel blends during the application to the diesel engine performance and emission parameters—Taguchi and RSM approach. J Braz Soc Mech Sci Eng 2020; 42: 14.

Sharma

Pali

Kumar

, et al. Effect of α-aluminium oxide nano additives with Sal biodiesel blend as a potential alternative fuel for existing DI diesel engine. Energy Environ. Epub ahead of print 26 October 2022. DOI: 10.1177/0958305X221133257.

Kumar

Pali

Kumar

Effect of injection timing of waste plastic oil and its blends on CRDI diesel engine. Int J Engine Res. Epub ahead of print 3 September 2022. DOI: 10.1177/14680874221119131.

Bidir

Narayanan Kalamegam

Adaramola

Hagos

Singh

RC.

Comparative study on the effect of nanoparticles in ternary fuel blends on combustion, performance, and emissions characteristics of diesel engine. Int J Engine Res. Epub ahead of print 4 November 2022. DOI: 10.1177/14680874221132963.

Lakhera

Kumar

Sharma

, et al. Optimization of diesel engine performance and emission characteristics with cerium oxide nanoparticles mixed waste cooking oil biodiesel blends. Int J Engine Res. Epub ahead of print 5 November 2022. DOI: 10.1177/14680874221133223.

Ahmed

Pali

Khan

MM.

Experimental analysis of diesel/biodiesel blends with a nano additive for the performance and emission characteristics of CI Engine. Int J Engine Res. Epub ahead of print 29 October 2022. DOI: 10.1177/14680874221132958.

Bidir

Narayanan Kalamegam

Adaramola

Hagos

Chandra Singh

Investigation of combustion, performance, and emissions of biodiesel blends using graphene nanoparticle as an additive. Int J Engine Res. Epub ahead of print 6 May 2022. DOI: 10.1177/14680874221097574.

Sahu

Mishra

Choudhary

Exergo-economic analysis and optimization of cooled CGAM cycle: a gas turbine based co-generation cycle. Int J Engine Res. Epub ahead of print 7 June 2022. DOI: 10.1177/14680874221104634.

Rathore

Kar

Thermodynamics of CMC bladed marine gas turbine-LM 2500: effect of cycle operating parameters. Int J Engine Res. Epub ahead of print 2 April 2022. DOI: 10.1177/14680874221086219.

10.

Saxena

Dwivedi

Srivastava

, et al. A comparatively numerical investigation on heat transfer behavior of different materials used for internal combustion engines. Int J Engine Res. Epub ahead of print 14 July 2022. DOI: 10.1177/14680874221112722.