RobertAZaccardiJ-MDulCGuerouaniARudloffJ. Numerical study of auto-ignition propagation modes in toluene reference fuel–air mixtures: towards a better understanding of abnormal combustion in spark-ignition engines. Int J Engine Res2019; 20(7): 734–745.
2.
RobertATruffinKIafrateNJaySColinOAngelbergerC. Large-eddy simulation analysis of knock in a direct injection spark ignition engine. Int J Engine Res2019; 20(7): 765–776.
3.
KinoshitaMFuyutoTAkatsukaH. Measurement of vibrational and rotational temperature in spark discharge plasma by optical emission spectroscopy; change in thermal equilibrium characteristics of plasma under air flow. Int J Engine Res2019; 20(7): 746–757.
4.
DrakeMCFanslerTDSolomonASSzekelyGA. Piston fuel films as a source of smoke and hydrocarbon emissions from a wall-controlled spark-ignited direct-injection engine. SAE paper 2003-01-0547, 2003.
5.
LuoHNishidaKUchitomiSOgataYZhangWFujikawaT. Effect of spray impingement distance on piston top fuel adhesion in direct injection gasoline engines. Int J Engine Res. Epub ahead of print 22May2018. DOI: 10.1177/1468087418774175.
6.
BaronJHChengWK. Back pressure effect on three-way catalyst light-off. Int J Engine Res2019; 20(7): 726–733.
7.
FuyutoTTakiM. Noise-canceling spike between pilot and main-pressure-rise peaks of multiple-injection diesel combustion. Int J Engine Res2019; 20(7): 788–804.
8.
HaradaYUchidaKTanakaTSatoKZhuQFujimotoH, et al. Wall heat transfer of unsteady near-wall flow in internal combustion engines. Int J Engine Res2019; 20(7): 817–833.
9.
HanZReitzRD. A temperature wall function formulation for variable density turbulent flows with application to engine convective heat transfer modeling. Int J Heat Mass Tran1997; 40(3): 613–625.
10.
KawanabeHKomaeJIshiyamaT. Analysis of flow and heat transfer during the impingement of a diesel spray on a wall using large eddy simulation. Int J Engine Res: 20(7): 758–764.
11.
KawaguchiAWakisakaYNishikawaNKosakaHYamashitaHYamashitaC, et al. Thermo-swing insulation to reduce heat loss from the combustion chamber wall of a diesel engine. Int J Engine Res2019; 20(7): 805–816.
12.
GaoJKuoT-W. Toward the accurate prediction of soot in engine applications. Int J Engine Res2019; 20(7): 706–717.
13.
DejimaKNakabeppuONakamuraYTsuchiyaTNagasakaK. Three-point MEMS heat flux sensor for turbulent heat transfer measurement in internal combustion engines. Int J Engine Res2019; 20(7): 696–705.
14.
ShimuraMYoshidaSOsawaKMinamotoYYokomoriTIwamotoK, et al. Micro particle image velocimetry investigation of near-wall behaviors of tumble enhanced flow in an internal combustion engine. Int J Engine Res2019; 20(7): 718–725.
15.
AndertJXiaFKleinSGuseDSavelsbergRTharmakulasingamR, et al. Road-to-rig—to—desktop—virtual development using real-time engine modeling and powertrain co-simulation. Int J Engine Res2019; 20(7): 686–695.
16.
AzetsuAKitajimaIKuratsujiK. Development of a new visualization technique using photochromism for transport process of lubricating oil around the engine piston. Int J Engine Res2019; 20(7): 777–787.
