This work presents a scalable model of a naturally aspirated gasoline engine forecasting the effective efficiency map for varying cylinder displacements. Engine test bench measurements and a global nonlinear hybrid optimization method were used to calibrate the engine model. The validation showed a good prediction of engine efficiency by the scaling model with a mean error of 2% compared with the measurements. A pure scaling of the cylinder displacement led to overall small changes in the effective engine efficiency map. In addition to the development of a scalable engine model, a forward-looking hybrid vehicle simulation model was used in order to evaluate the impact of different engine cylinder displacements on fuel consumption. For this purpose, simulations for varying cylinder displacements were performed in a series–parallel hybrid drivetrain of an A-class vehicle in two driving cycles. The simulation results showed a small influence of different engine cylinder displacements on fuel consumption for the given configuration.
StadlerR.Strategic technology mix: roadmap for future mobility adapted to individual markets and customers. In: 35th International Vienna Motor Symposium, Vienna, Austria, 2014.
3.
GandB.Einfluss des Hub-Bohrungs-Verhältnisses auf den Prozessverlauf des Ottomotors. Dissertation, RWTH Aachen University, 1986.
4.
BickW.Einflüsse geometrischer Grunddaten auf den Arbeitsprozess des Ottomotors bei verschiedenen Hub-Bohrungs-Verhältnissen. Dissertation, RWTH Aachen University, 1990.
HussM.Übertragung von Motoreigenschaften mit Hilfe charakteristischer Skalierfunktionen zur Simulation verschiedener Varianten von Ottomotoren. Dissertation, Technical University Munich, 2013.
7.
WittA.Analyse der thermodynamischen Verluste eines Ottomotors unter den Randbedingungen variabler Steuerzeiten. Dissertation, Technical University Graz, 1999.
8.
FilipiZ.AssanisD.N.The effect of stroke to bore ratio on combustion, heat transfer and performance of a homogeneous charge spark ignited engine of given displacement. Int J Engine Res, 2000, 1(2), pp. 191–208.
9.
SchmidA.BargendeM.Wirkungsgradoptimaler Ottomotor II. Final Report FVV Project No. 994, 2011.
10.
SchechJ.SiedentopA.HerbstF.WiebeA.EiltsP.Conceptual design of small direct-injection spark- ignition engine concepts with various injector positions by use of CAE-Tools. In: SAE Technical Paper 2012-32-0066, SAE International, 2012.
11.
WolfR.EiltsP.Comparison of fuel consumption and emissions of automotive and large-bore diesel engines. In: SAE Technical Paper 2014-01-1100, SAE International, 2014.
12.
HeywoodJ.B.Internal combustion engine fundamentals, 1988 (McGraw-Hill, New York).
13.
PischingerS.SeibelJ.KlenkM.TeetzC.Optimized layout of internal combustion engines for hybrid powertrains. Final Report FVV Project No. 1011, Booklet 852, RWTH Aachen University, 2008.
14.
MinamiK.YoshimiY.Conceptual simulation for plug-in HEV at early stage of development. In: SAE Technical Paper 2015-01-0980, SAE International, 2015.
15.
PischingerS.BalazsA.KlenkM.TeetzC.Hybridantrieb unter realen Fahrbedingungen. Final Report FVV Project No. 863, Booklet 877, RWTH Aachen University, 2011.
16.
HussM.HübnerW.WachtmeisterG.Scaling functions for the simulation of different SI-engine concepts in conventional and electrified power trains. In: 11th Stuttgart Symposium Automotive- and Engine Technology. Stuttgart, Germany, 2011.
17.
HamannH.MünningD.ZillmerM.EiltsP.Development of an energy management strategy for a series-parallel hybrid electric vehicle. In: 12th Hybrid and Electric Vehicles Symposium, Braunschweig, Germany, 2015.
18.
HiguchiN.SunagaY.TanakaM.ShimadaH.Development of a new two-motor plug-in hybrid system. In: SAE Technical Paper 2013-01-1476, SAE International, 2013.
19.
FelschC.FugelM.ScholzN.ZillmerM.Fuel efficiency and driving performance comparison of different hybrid powertrain topologies. In: 10th Hybrid and Electric Vehicles Symposium, Braunschweig, Germany, 2013.
20.
KennedyJ.EberhartR.Particle swarm optimization. In: Proceedings of the IEEE International Conference on Neural Networks, 1995.
21.
NelderJ.A.MeadR.A simplex method for function minimization. Comput J, 1995, 7, pp. 308–313.
22.
HsuC.GaoC.Particle swarm optimization incorporating simplex search and center particle for global optimization. In: IEEE Conference on Soft Computing in Industrial Applications, Muroran, Japan, 2008.
23.
MünningD.PiewekJ.WagnerA.FelschC.ZillmerM.GühmannM.EiltsP.Application of a hybrid optimization method in the diesel hybrid drive train development process. In: IAV Conference - Design of Experiments (DoE) in der Motorenentwicklung, 2013 (Expert Verlag, Renningen).
24.
MünningD.Optimierung der Betriebsstrategie eines Dieselfullhybrids auf Basis einer thermischen Antriebsstrangsimulation. Dissertation, Technical University Braunschweig, 2014.
25.
EberhartR.C.ShiY.Particle swarm optimization: developments, applications and resources. In: Proceedings of IEEE Congress on Evolutionary Computation, 2001.
26.
ClercM.The swarm and the queen: towards a deterministic and adaptive particle swarm optimization. In: Congress on Evolutionary Computation, 1999.
27.
FischerG.D.Expertenmodell zur Berechnung der Reibungsverluste von Ottomotoren. Dissertation, Technical University Darmstadt, 2000.
28.
SandovalD.HeywoodJ.B.An improved friction model for spark- ignition engines. In: SAE Technical Paper, SAE International, 2003.
29.
KuniedaK.TanidaM.KomiyaE.Development of low friction radial lip seals. In: SAE Technical Paper 2008-04-14, SAE International, 2008.
30.
GorzalkaP.Skalierung von Ottomotoren zur Anwendung in der Hybridsimulation. Bachelor-Thesis, RWTH Aachen University, 2015.
31.
PischingerR.KellM.SamsT. Thermodynamik der Verbrennungskraftmaschine, 2009 (Springer-Verlag, Vienna).
32.
WredeR.FelschC.Hybrid-Berechnung mit ELA-SIM. In: Internal Document, Volkswagen, 2010.
33.
YaguchiH.UeharaT.WatanabeK.TokiedaJ.Development of a new hybrid system for compact class vehicles. In: 24th Electric Vehicle Symposium, Stravanger, Norway, 2009.
34.
KillmannG.TakaokaT.The hybrid powertrain of the New Toyota Prius. In: 18th Colloquium Automobile and Engine Technology, Aachen, Germany, 2009.
35.
YonekawaA.UenoM.WatanabeO.IshikawaN.Development of a new gasoline engine for ACCORD Plug-In Hybrid. In: SAE Technical Paper 2013-01-1738, SAE International, 2013.
