ClerkD.The gas engine. 1st ed.Longmans, Green & Co., 1886.
2.
YoungMB. Cyclic dispersion in the homogeneous-charge spark-ignition engine—a literature survey. SAE Paper 810020, 1981.
3.
OzdorNDulgerMSherE. Cyclic variability in spark ignition engines: a literature survey. SAE Paper 940987, 1994.
4.
FanslerTDReussDLSickVDahmsRN. Combustion instability in spray-guided stratified-charge engines—a review. Int J Engine Res. Epub ahead of print 2February2015. DOI: 10.1177/1468087414565675.
5.
ZengWSjöbergMReussDL. PIV examination of spray-enhanced swirl flow for combustion stabilization in a spray-guided stratified-charge direct-injection spark-ignition engine. Int J Engine Res. Epub ahead of print 26December2014. DOI: 10.1177/1468087414564605.
6.
AbrahamPSYangXGuptaSKuoT-WReussDLSickV. Flow-pattern switching in a motored spark ignition engine. Int J Engine Res. Epub ahead of print 13January2015. DOI: 10.1177/1468087414565400.
7.
WuBMaYYuXGuWLiYSuW. Effects of exhaust gas recycle loop layout and retarded intake valve closing on variations in combustion in a heavy-duty diesel engine. Int J Engine Res. Epub ahead of print 16October2014. DOI: 10.1177/1468087414555731.
8.
ChenTZhaoHXieHHeB. Analysis of cyclic variations during mode switching between spark ignition and controlled auto-ignition combustion operations. Int J Engine Res. Epub ahead of print 27October2014. DOI: 10.1177/1468087414555733.
9.
FinneyCKaulBDawSWagnerREdwardsKDGreenJBJr.A review of deterministic effects in cyclic variability of internal combustion engines. Int J Engine Res, 2015. DOI: 10.1177/1468087415572033.
10.
RichardSDulbeccoAAngelbergerCTruffinK. Development of a 1D CFD modeling approach to predict cycle-to-cycle variability in spark-ignition engines based on physical understanding acquired from large-eddy simulation. Int J Engine Res. Epub ahead of print 19December2014. DOI: 10.1177/1468087414560592.
11.
FontanesiSd’AdamoARutlandCJ. LES analysis of spark configuration effect on CCV of combustion and knock. Int J Engine Res. Epub ahead of print 9January2015. DOI: 10.1177/1468087414566253.
12.
KlosDKokjohnSL. Investigation of the sources of combustion instability in low-temperature combustion engines using response surface models. Int J Engine Res. Epub ahead of print 3November2014. DOI: 10.1177/1468087414556135.
13.
JiaMDempseyABWangHLiYReitzRD. Numerical simulation of cyclic variability in reactivity-controlled compression ignition combustion with a focus on the initial temperature at intake valve closing. Int J Engine Res. Epub ahead of print 21September2014. DOI: 10.1177/1468087414552088.
14.
SpelinaJMPeyton JonesJCFreyJ. Stochastic simulation and analysis of a classical knock controller. Int J Engine Res. Epub ahead of print 18September2014. DOI: 10.1177/1468087414551073.
15.
LarimoreJHellströmEJadeSStefanopoulouAJiangL. Real-time internal residual mass estimation for combustion with high cyclic variability. Int J Engine Res. Epub ahead of print 8October2014. DOI: 10.1177/1468087414552616.
16.
JungkunzAFRaviNLiaoH-HErlienSMGerdesJC. An analytical method for reducing combustion instability in homogeneous charge compression ignition engines through cycle-to-cycle control. Int J Engine Res. Epub ahead of print 12November2014. DOI: 10.1177/1468087414557052.
17.
RassweilerGMWithrowLCorneliusW. Engine combustion and pressure development—effects of mixture ratio, spark position, and throttle opening on flame pictures and pressure cards. SAE J1940; 46: 25–48.
18.
MilesPC. The history and evolution of optically accessible research engines. In: ASME 2014 internal combustion engine division fall technical conference, Columbus, IN, 19–22 October 2014, paper no. ICEF2014-5701. New York: ASME. DOI: 10.1115/ICEF2014-5701.
19.
DavisRSPattersonGJ. Cylinder pressure data quality checks and procedures to maximize data accuracy. SAE Paper 2006-01-1346, 2006.
20.
GhandhiJB. Pressure and heat release analysis. In: CrollaDFosterDEKobayashiTVaughanN (eds) Encyclopedia of automotive engineering. John Wiley & Sons, Ltd, 2014. DOI: 10.1002/9781118354179.auto122.
21.
SickVDrakeMCFanslerTD. High-speed imaging for direct-injection gasoline engine research and development. Exp Fluids2010; 49: 937–947.
22.
AldénMBoodJLiZRichterM. Visualization and understanding of combustion processes using spatially and temporally resolved laser diagnostic techniques. P Combust Inst2011; 33: 69–97.
23.
SickV. High speed imaging in fundamental and applied combustion research. P Combust Inst2013; 34: 3509–3530.
24.
MilesPCHildingssonLHultqvistA. The influence of fuel injection and heat release on bulk flow structures in a direct-injection, swirl-supported diesel engine. Exp Fluids2007; 43: 273–283.
25.
MilesPC. Turbulent flow structure in direct-injection, swirl-supported diesel engines. In: ArcoumanisCKamimotoT (eds) Flow and combustion in reciprocating engines. Berlin: Springer, 2009, pp.173–256.
26.
ChenHReussDLHungDLSickV. A practical guide for using proper orthogonal decomposition in engine research. Int J Engine Res2012; 14: 307–319.
27.
ReynoldsWC. Modeling of fluid motions in engines—an introductory overview. In: MattaviJNAmannCA (eds) Combustion modeling in reciprocating engines. New York: Plenum Press, 1980, pp.41–68.
28.
RutlandCJ. Large-eddy simulations for internal combustion engines—a review. Int J Engine Res2011; 12: 421–451.
