Numerical Simulation of Oxy-Acetylene Testing Procedure of Ablative Materials for Re-Entry Space Vehicles

Abstract

A testing apparatus for flame exposure of ablative, high thermal flux-resistant materials has been designed and manufactured according to the ASTM E 285-80 standard. The test is useful for the selection of thermal protection systems (TPS) working as ablators and for the evaluation of their shielding performance. In order to support the material/component design and to offer new and differentiated tools for the screening phase of TPS materials, a CFD (computational fluid-dynamics) model of the burning test was developed. The model simulates the combustion of an oxygen—acetylene mixture occurring in a conventional welding torch, and calculates the heat flux incident on the sample and the related temperature fields. The validation of the model was obtained performing suitable instrumented tests enabling direct measurements of both incident heat flux and temperatures of the front and back surfaces of an ablative sample. Good agreement was found between numerical results and experimental measurements, encouraging the use of simulations for the design of the test environmental conditions.

Keywords

computational fluid-dynamics ablative thermal protection systems oxy-acetylene exposure test

Get full access to this article

View all access options for this article.

References

Venkatapathy

Laub

Hartman

G. J.

Arnold

J. O.

Wright

M. J.

Allen

G. A.

Thermal protection system development, testing, and qualification for atmospheric probes and sample return missions: Examples for Saturn, Titan and Stardust-type sample return. Adv. Space Res. 2009, 44(1), 138–150.

De Filippis

Del Vecchio

Martucci

Trifoni

Marraffa

Savino

Paterna

, 70MW plasma wind tunnel up-grades for ESA AURORA TPS testing. In Proceedings of the 4th International Planetary Probe Workshop, Pasadena, CA, USA, June 2006, available from http://ippw.jpl.nasa.gov/WORKSHOP/WorkshopProceedings/.

ASTM Standard E285. Standard test method for oxyacetylene ablation testing of thermal insulation materials, ASTM International, West Conshohocken, PA, USA, 1980 (2002).

Kafiatullin

R. A.

Eremin

S. A.

Sagadeev

E. V.

Calculation of the heats of combustion of acetylene hydrocarbons. Theoretical Found. Chem. Eng. 2007, 41(2) 221–224.

Diller

T. E.

In The measurement, instrumentation and sensors handbook on CD-ROM (Ed. Webster

J. G.

), 1999 (Crc Press Llc, Boca Raton, FL, USA).

Ballestrìn

Estrada

C. A.

Rodrìguez-Alonso

Pérez-Ràbago

Langley

L. W.

Barnes

Heat flux sensors: Calorimeters or radiometers?

Sol. Energy 2006, 80(10), 1314–1320.

Launder

B. E.

Spalding

D. B.

Lectures in mathematical models of turbulence 1972 (Academic Press, London, England).

Ertesvåg

I. S.

Magnussen

B. F.

The Eddy dissipation turbulent energy cascade model. Comb. Sci. Tech. 2001, 159, 213–236.

Cheng

Two-dimensional radiating gas flow by a moment method. AIAA J. , 1964, 2, 1662–1664.

10.

Siegel

Howell

J. R.

Thermal radiation heat transfer 1992 (Hemisphere Publishing Corporation, Washington, DC, USA).

11.

FLUENT® 6.3 user's guide. Chapter 7 — Boundary conditions: 2006, pp. 7–15 (Fluent Inc., Lebanon, NH).

12.

Pulci

Tirillò

Marra

Fossati

Bartuli

Valente

Carbon—phenolic ablative materials for re-entry vehicles: Manufacturing and properties. Compos. A 2010 41(10), 1483–1490.