Metallurgical,mechanical,and corrosion behavior of AISI 304L joints welded using variable arc energy inputs and subjected to thermal aging

Abstract

The effect of three levels of welding arc energy input on the metallurgical, mechanical, and corrosion behavior of AISI 304L stainless steel was studied with the aim of investigating and recommending the most useful range of process parameters for improved performance of engineering structures made from this industrially important alloy. The gas tungsten arc welding process was employed, and all the joints were butt-welded using a single-V groove design. With an increase in heat input, the δ-ferrite phase changed from lathy to vermicular, besides the heat-affected zones of all the welds exhibiting grain coarsening effects. Postweld thermal aging led to the preferential occurrence of carbides in the interdendritic regions, which degraded their corrosion performance. Thermal aging did not affect the tensile strength of these welds, but their ductility was significantly impacted. The extent of segregation of Cr and C, especially, was observed to be the least in the case of low heat input welds. This study establishes that while designing welding procedures for AISI 304L structures, low welding arc energy should be used as it promotes better mechanical as well as corrosion properties.