RubioEMCamachoAM. Special Issue of the Manufacturing Engineering Society (MES). Materials (Basel)2018; 11: 2149.
2.
RubioEMCamachoAM. Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019). Materials (Basel)2020; 13: 2133.
3.
CamachoAMRubioEM. Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019). Appl Sci2020; 10: 1590.
4.
RubioEMCamachoAM. Special Issue of the Manufacturing Engineering Society 2020 (SIMES-2020). Materials (Basel)2021; 14: 3208.
5.
CamachoAMRubioEM. Special Issue of the Manufacturing Engineering Society 2020 (SIMES-2020). Appl Sci2021; 11: 5975.
6.
Rodríguez-PrietoATrujilloFJ. Special Issue of the Manufacturing Engineering Society—2021 (SIMES-2021). Materials (Basel)2022; 15: 4772. doi: 10.3390/ma15144772
7.
TrujilloFJRodríguez-PrietoA. Special Issue of the Manufacturing Engineering Society—2021 (SIMES-2021). Appl Sci2022; 12: 6666. doi: 10.3390/app12136666
8.
Sociedad de Ingeniería de Fabricación. Available online:http://www.sif-mes.org/(accessed on 6 Dec 2023).
9.
RamanathanPSrinivasanRNeelakandanS. Third-generation biodegradable bone implants: a novel Mg-1Zn-0.5Sc alloy treated by laser shock peening to improve its characteristics. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 225–244.
10.
Martín-BéjarSTrujillo VilchesFJHerrera FernándezM, et al.Cutting parameters influence on surface integrity of dry-turned Ti6Al4 V alloy. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 245–262.
11.
SrinivasanNKRadhakrishnanRMSrinivasanR,et al.Investigation of the performance of recycled copper swarf tool electrode processed through bound powder extrusion for micromachining. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 263–272.
12.
ChenYWuYChengM, et al.Experimental study on micro electrical discharge machining of alumina–titanium carbide ceramic materials. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 273–281.
13.
PrakashAKumarABallavR. Process capability of electrochemical discharge machining: a review. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 282–300.
14.
MeghanathanSRadhakrishnanRMRamamoorthiV,et al.Machinability study on laser-based powder bed fusion processed hypo-eutectic aluminum alloy composite (AlSi10Mg + NbC). Proc IMechE Part L: J Materials: Design and Applications2023; 238: 301–309.
15.
ChenYWuYChengM, et al.Performance prediction and parameter optimization of alumina-titanium carbide ceramic micro-EDM hole machining process based on XGBoost. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 310–319.
16.
MartínezJHernándezPCarouD. An experimental evaluation of cryogenic machining in the drilling of carbon fiber reinforced plastics for aerospace. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 320–331.
17.
Castelló PedreroPGarcía GascónCBas BoluferJ,et al.Integrated computational modeling of large format additive manufacturing: developing a digital twin for material extrusion with carbon fiber reinforced ABS. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 332–346.
18.
Robles-LoriteLDorado-VicenteRMedina-SánchezG, et al.Additive manufacturing of non-uniform scaffolds for mass center control. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 347–356.
19.
del RíoNCarouDPereiraA. Examining the surface quality of inner and outer surfaces in material extrusion printed samples. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 357–365.
20.
ShankarKVFathiRSalehB, et al.Influence of ageing temperature on the tribological characteristics of LM25/Al2O3/SiC hybrid metal matrix composite for lightweight applications. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 366–383.
21.
NikhileshSDeepikaD. Tribological properties of novel Al 7075(T6)-SiC-Crumb rubber-MoS2 based hybrid composites: an experimental approach towards green revolution. Proc IMechE Part L: J Materials: Design and Applications2023; 238: 384–394.
