This paper is focused on the formability of wire-arc additively manufactured AISI 316L stainless steel sheets with the purpose of analysing the feasibility of including this material in hybrid additive manufacturing chains involving sheet metal forming operations. Conventional tensile tests performed in specimens obtained from different orientations to the building direction were carried out to characterise the mechanical properties, the strain loading paths and the limiting strains at fracture. Microstructure observations combined with fractography analysis add insight to the results by establishing a link between the forming limits by fracture and the crack opening mechanisms. Results obtained for wrought commercial AISI 316L stainless steel sheets are included for comparison purposes and reveal that the additively manufactured sheets have a much stronger anisotropic behaviour and poorer formability due to their dendritic-based microstructure. Still, the forming limits obtained from the experiments allow concluding that the additively manufactured sheets can withstand large plastic deformations and, therefore, can be used in hybrid additive manufacturing routes.
AhnDG. Applications of laser assisted metal rapid tooling process to manufacture of molding & forming tools—state of the art. Int J Prec Eng Manuf2011; 12: 925–938. https://doi.org/10.1007/s12541-011-0125-5
6.
JunkerDHentschelOSchmidt M,et al.Qualification of laser based additive production for manufacturing of forging tools. In MATEC Web of Conferences 2015; 21: 08010. https://doi.org/10.1051/matecconf/20152108010
7.
PraganaJPMSampaioRFVBragançaIMF,et al.Hybrid metal additive manufacturing: a state-of-the-art review. Adv. Ind Manuf Eng2021; 2: 100032. https://doi.org/10.1016/j.aime.2021.100032
8.
SilvaCMABragançaIMFCabritaA,et al.Formability of a wire arc deposited aluminium alloy. J Braz Soc Mech Sci Eng2017; 39: 4059–4068. https://doi.org/10.1007/s40430-017-0864-z
9.
LiYRapthaduR. Bending-Additive-Machining hybrid manufacturing of sheet metal structures. International Manufacturing Science and Engineering Conference 2017; V001T02A021. https://doi.org/10.1115/MSEC2017-3062
10.
ButzhammerLDubjellaPHuberF, et al.Experimental investigation of a process chain combining sheet metal bending and Laser beam melting of Ti-6Al-4V. Proceedings of World of Photonics Congress: Lasers in Manufacturing—LiM 2017. https://www.wlt.de/lim/Proceedings2017/Data/PDF/Contribution137_final.pdf
11.
RosenthalSHahnMTekkayaAE. Simulation approach for the three-point plastic bending of additively manufactured hastelloy X sheets. Procedia Manuf2017; 34: 475–481. https://doi.org/10.1016/j.promfg.2019.06.201
12.
AhujaBSchaubAKargM,et al.High power laser beam melting of Ti-6Al-4V on formed sheet metal to achieve hybrid structures. Laser 3D Manuf II2015; 9353: 93530X. https://doi.org/10.1117/12.2082919
13.
BambachMSviridovAWeisheit A,et al.Case studies on local reinforcement of sheet metal components by laser additive manufacturing. Metals2017; 7: 113. https://doi.org/10.3390/met7040113
14.
SchulteRPapkeTLechner M,et al.Additive manufacturing of tailored blank for sheet-bulk metal forming processes. IOP Conf Ser Mater Sci Eng2020; 967: 12034. https://doi.org/10.1088/1757-899x/967/1/012034
15.
HafeneckerJPapkeTHuberF,et al.Modelling of hybrid parts made of Ti-6Al-4V sheets and additive manufactured structures. In: Congress of the German Academic Association for Production Technology 2021; 13–22. https://doi.org/10.1007/978-3-662-62138-7_2
16.
HölkerRJägerABen Khalifa N,et al.Process and Apparatus for the Combined Manufacturing of Workpieces by Incremental Sheet Metal Forming and Manufacturing Methods in One Set-Up. German Patent DE 10, no. 201414202.7, 2014.
17.
LópezCElías-ZúnigaAJiménezI,et al.Experimental determination of residual stresses generated by single point incremental forming of AlSi10Mg sheets produced using SLM additive manufacturing process. Materials2018; 11: 2542. https://doi.org/10.3390/ma11122542
18.
AmbrogioGGagliardiFMuzzupappa M,et al.Additive-incremental forming hybrid manufacturing technique to improve customised part performance. J Manuf Process2019; 37: 386–391. https://doi.org/10.1016/j.jmapro.2018.12.008
19.
PraganaJPMCristinoVAMBragançaIMF,et al.Integration of forming operations on hybrid additive manufacturing systems based on fusion welding. Int J Precis Eng Manuf, Green Tech2020; 7: 595–607. https://doi.org/10.1007/s40684-019-00152-y
20.
RosenthalSPlattSJagerRH,et al.Forming properties of additively manufactured monolithic Hastelloy X sheets. Mater Sci Eng2020; 753: 300–316. https://doi.org/10.1016/j.msea.2019.03.035
21.
KokYTanXPWangP,et al.Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des2018; 139: 565–586. https://doi.org/10.1016/j.matdes.2017.11.021
22.
ASTM E8/E8M. Standard test methods for tension testing of metallic materials. West Conshohocken, USA: ASTM International, 2016.
23.
MagrinhoJPSilvaMBReis L,et al.Formability limits, fractography and fracture toughness in sheet metal forming. Materials2019; 12: 1493. https://doi.org/10.3390/ma12091493
24.
HillR. A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc Lond Series A, Math Phys Sci1948; 193: 281–297. https://doi.org/10.1098/rspa.1948.0045
