A successful attempt has been made to develop coir fibre composites reinforced with graphene, epoxy and carbon fibre. The carbon fibres were arranged in an intercalated manner, which is similar to the coir fibres. The percentage composition of graphene was varied as 1, 2, 4 and 6% by weight of the holding matrix. Suitable surface modifications were done by treating natural fibres by 5% NaOH and 0.3% KMnO4 for better adhesion of fibre and epoxy resin. Sonication and cetyl trimethyl ammonium bromide treatments were also done to achieve the fine scattering of graphene in the epoxy matrix in order to achieve better mechanical behaviour. Moulds were made as per D638 American Society for Testing and Materials (ASTM) standards. The treated fibres were then arranged in the mould by the conventional hand layup technique. Tensile testing was carried out to determine the mechanical properties of the composites. Two-way analysis of variance was used as a statistical tool to find the effect of parameters such as ‘Percentage composition of graphene’ and ‘Type of mould’ on the modulus of the composites. Fourier transform infrared spectroscopy was conducted to determine the interferential adhesion and homogeneous distribution of fibres in the composite matrix. At last, field emission scanning electron microscopy analyses were also done to the specimens before and after tensile testing to determine the morphology of different entities present in the composites.
ElzubairAMiguez SuarezJC.Mechanical behaviour of recycled polyethylene/piassava fibre composites. Mater Sci Eng A2012;
557: 29–35.
2.
SanjayMArpithaGYogeshaB.Study on mechanical properties of natural-glass fibre reinforced polymer hybrid composites: a review. Mater Today Proc2015;
2: 2959–2967.
3.
ChandelAShahTShahT, et al.
A comparative strength study of coir fibre reinforced concrete (CFRC) over plain cement concrete (PCC). IOSR J Mech Civil Eng2016;
13: 95–97.
4.
AdeniyiAGOnifadeDVIghaloJO, et al.
A review of coir fibre reinforced polymer composites. Compos Part B Eng2019;
176: 107305.
5.
DasGBiswasS.Effect of fibre parameters on physical, mechanical and water absorption behaviour of coir fibre–epoxy composites. J Reinf Plast Compos2016;
35: 644–653.
6.
QuyHVNguyenST.Experimental analysis of coir fibre sheet reinforced epoxy resin composite. IOP Conf Ser Mater Sci Eng2019;
642: 12007.
7.
NaveenPRajuTD.Evaluation of mechanical properties of coconut coir fibre reinforced polymer matrix composites. J Nano Res2013;
24: 34–45.
8.
GeethammaVGJosephRThomasS.Short coir fibre-reinforced natural rubber composites: effects of fibre length, orientation, and alkali treatment. J Appl Polym Sci1995;
55: 583–594.
9.
MonteiroSNCaladoVRodriguezJS, et al.
Thermogravimetric behaviour of natural fibres reinforced polymer composites – an overview. Mater Sci Eng A2012;
557: 17–28.
10.
AhmadMAGüvenGGSarıkavaklıN.Some features of doping of nano-graphite in natural coir fibre epoxy composites. Eur J Sci Technol2019;
15: 491–498.
11.
Nam TH, Ogihara S, Tung NH, et al. Effect of alkali treatment on interfacial and mechanical properties of coir fibre reinforced poly (butylene succinate) biodegradable composites. Compos Part B Eng 2011; 6: 1648–1656.
12.
KhanamPNKhalilHPSAJawaidM, et al.
Sisal/carbon fibre reinforced hybrid composites: tensile, flexural and chemical resistance properties. J Polym Environ2010;
18: 727–733.
13.
HalladSABanapurmathNPatilV, et al.
Graphene reinforced natural fibre nanocomposites for structural applications.IOP Conf Ser Mater Sci Eng2018;
376: 12072.
14.
RamadeviPSampathkumarDSrinivasaCV, et al.
Effect of alkali treatment on water absorption of single cellulosic abaca fibre.BioResources2012;
7: 3515–3524.
15.
JosephKThomasSPavithranC.Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites. Polymer1996;
37: 5139–5149.
16.
Annie PaulSBoudenneAIbosL, et al.
Effect of fibre loading and chemical treatments on thermophysical properties of banana fibre/polypropylene commingled composite materials. Compos Part A Appl Sci Manuf2008;
39: 1582–1588.
17.
De AlbuquerqueACJosephKHecker de CarvalhoL, et al.
Effect of wettability and ageing conditions on the physical and mechanical properties of uniaxially oriented jute-roving-reinforced polyester composites. Compos Sci Technol2000;
60: 833–844.
18.
HaddenCKlimek-McdonaldDPinedaE, et al.
Mechanical properties of graphene nanoplatelet/carbon fibre/epoxy hybrid composites: multiscale modeling and experiments. Carbon2015;
95: 100–112.
19.
AnuarHAhmadSHRasidR, et al.
Mechanical properties and dynamic mechanical analysis of thermoplastic-natural-rubber-reinforced short carbon fibre and kenaf fibre hybrid composites. J Appl Polym Sci2007;
107: 4043–4052.
20.
NaveenJJawaidMZainudinES, et al.
Improved interlaminar shear behaviour of a new hybrid Kevlar/Cocos nucifera sheath composites with graphene nanoplatelets modified epoxy matrix. Fibres Polym2019;
20: 1749–1753.
BorahMDahiyaMSharmaS, et al.
Few layer graphene derived from wet ball milling of expanded graphite and few layer graphene based polymer composite. Mater Focus2014;
3: 300–309.
23.
PathakAKBorahMGuptaA, et al.
Improved mechanical properties of carbon fibre/graphene oxide-epoxy hybrid composites. Compos Sci Technol2016;
135: 28–38;
24.
ZhangXFanXYanC, et al.
Interfacial microstructure and properties of carbon fibre composites modified with graphene oxide. ACS Appl Mater Interf2012;
4: 1543–1552.
25.
SabaNJawaidMAlothmanOY, et al.
Recent advances in epoxy resin, natural fibre-reinforced epoxy composites and their applications. J Reinf Plast Compos2015;
35: 447–470
26.
BharadiyaPSMishraS.Enriched mechanical properties of epoxy/coir fibre composites with graphene oxide. Res Develop Mater Sci2019;
10: 1208–1214.
27.
MohanC.Natural fibre reinforced polymer composites for automobile accessories. Am J Environ Sci2013;
9: 494–504.
28.
DavimJReisPAntónioC.A study on milling of glass fibre reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA). Compos Struct2004;
64: 493–500.
29.
JawaidMKhalilHABakarAA.Woven hybrid composites: tensile and flexural properties of oil palm-woven jute fibres based epoxy composites. Mater Sci Eng A2011;
528: 5190–5195.
30.
Tarrío-SaavedraJNayaSFrancisco-FernándezM, et al.
Application of functional ANOVA to the study of thermal stability of micro-nano silica epoxy composites. Chemometrics Intell Laboratory Syst2011;
105: 114–124.
31.
LassilaLVVallittuPKGaroushiSK.Short fibre reinforced composite: the effect of fibre length and volume fraction. J Contemp Dental Pract2006;
7: 10–17.
32.
TezvergilALassilaLVVallittuPK.The effect of fibre orientation on the thermal expansion coefficients of fibre-reinforced composites. Dental Mater2003;
19: 471–477.
33.
Quadros JD, Vaishak NL, Balakrishna SS, et al.
Analysis of variance (ANOVA) and response surface analysis of thrust force and torque in drilling granite fibre reinforced epoxy composites by using multi facet HSS twist drill. Procedia Mater Sci2014;
5: 1660–1669.
34.
AbrahamEDeepaBPothenLA, et al.
Environmental friendly method for the extraction of coir fibre and isolation of nanofibre.Carbohydr Polym2013;
92: 1477–1483.
35.
Sari PS, Spatenka P, Jenikova Z, et al. New type of thermoplastic bio composite: nature of the interface on the ultimate properties and water absorption. RSC advances 2015; 5: 97536–97546.
36.
Song J, Yuan Q, Liu X, et al.
Combination of nitrogen plasma modification and waterborne polyurethane treatment of carbon fibre paper used for electric heating of wood floors. BioResources2015;
10: 5820–5829.
37.
Jiang Z, Xie J, Jiang D, et al. Modifiers-assisted formation of nickel nanoparticles and their catalytic application to p-nitrophenol reduction. CrystEngComm 2013; 15: 560–569.
38.
SilversteinRMBasslerGCMorrillTC.Spectrometric identification of organic compounds. 4th ed.
New York:
John Wiley and Sons, 1991.
39.
LeeWLeeS-BChoiO, et al.
Formicary-like carbon nanotube/copper hybrid nanostructures for carbon fibre-reinforced composites by electrophoretic deposition. J Mater Sci2010;
46: 2359–2364.
HernandezDASoufenCAOrlandiMO.Carbon fibre reinforced polymer and epoxy adhesive tensile test failure analysis using scanning electron microscopy. Mater Res2017;
20: 951–961.
42.
LeeSBLeeSMParkNI, et al.
Preparation and characterization of conducting polymer nano composite with partially reduced graphene oxide. Synth Met2015;
20: 161–166.
