A new procedure for drawing forming limit curves is suggested. The theoretical basis for computing the forming limit curve due to diffuse necking, for nonlinear strain paths, is derived. The theoretically determined forming limit curve is compared with experimentally determined forming limits for both linear and bilinear strain paths. Reasonable agreement is observed. The procedure can also be utilized for nonlinear strain paths in general.
KeelerJ. Determination of forming limits in automotive stampings. Sheet Metal Ind1965; 42: 683–691.
2.
GoodwinGM. Application of strain analysis to sheet metal forming problems in press shop. La Metall Ital1968; 60–68: 767–774.
3.
MarciniakZ. Stability of plastic shells under tension with kinematic boundary condition. Arch Mech Stos1965; 17: 577–592.
4.
NakazimaKKitumaT. Forming limits under biaxial stretching of sheet metals. Testu-to Hagane1967; 53: 455–458.
5.
ISO 12004-2:2008. Metallic materials – Sheet and strip – Determination of forming-limit curves – Part 2: Determination of forming-limit curves in the laboratory. ISO2008; 1: 1–27.
6.
MüschenbornWSonneHM. Einfluss des Formänderungsweges auf die Grenzformänderungen des Feinbleches. Arch Eissenhüttenwes1975; 46: 597–602.
Arrieux R. Contribution to the determination of forming limit curves of titanium and aluminum: Proposal of an intrinsic criterion. PhD Thesis, INSA, Lyon, France, 1981.
9.
StoughtonTBZhuX. Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD. Int J Plast2004; 20: 1463–1486.
10.
StoughtonTBYoonJW. A new approach for failure criterion or sheet metals. Int J Plast2011; 27: 440–459.
11.
UpadhyuaMVCapekJPetegemSVet al.Intergranular strain evolution during biaxial loading: A multiscale FE-FFT approach. JOM2017; 69: 839–847.
12.
IadicolaMAHuLRollettADet al.Crystal plasticity analysis of constitutive behavior of 5754 aluminum sheet deformed along bi-linear strain paths. Int J Solids Struct2012; 49: 3507–3516.
13.
HillR. A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc A1948; 193: 281–297.
