A newly developed Ag–9Pd–9Ga active filler was vacuum brazed, and the mechanical properties between the metallic interconnects (SS430, Crofer22 APU, Crofer22 H) and a Ni–yttria-stabilized zirconia cermet anode were systematically investigated. The results indicate that the bonding between metal and cermet is well established and that the interface is smooth. The joint strength evaluated at both 25 ℃ and 800 ℃ under shear and tensile loading conditions confirmed that the brazed Ag–9Pd–9Ga sealant compared favorably with its commercially available glass-ceramic GC-9 counterpart.
SinghRN. Sealing technology for solid oxide fuel cells (SOFC). Int J Appl Ceram Technol2007; 4: 134–144.
5.
SinghalC. Solid oxide fuel cells for power generation. WIREs Energy Environ2014; 3: 179–194.
6.
LinCKChenTTChyouYPet al.Thermal stress analysis of a planar SOFC stack. J Power Sources2007; 164: 238–251.
7.
LinCKHuangLHChiangLKet al.Thermal stress analysis of planar solid oxide fuel cell stacks: Effects of sealing design. J Power Sources2009; 192: 515–524.
8.
AlmanDEJohnsonCDCollinsWKet al.The effect of cerium surface treated ferritic stainless steel current collectors on the performance of solid oxide fuel cells (SOFC). J Power Sources2007; 168: 351–355.
9.
SinghalSC. Solid oxide fuel cells for stationary, mobile and military applications. Solid State Ionics2002. 152–153: 405–410.
10.
BadwalSPS. Stability of solid oxide fuel cell components. Solid State Ionics2001; 143: 39–46.
11.
SinghMShpargelTPAsthanaR. Brazing of yttria-stabilized zirconia (YSZ) to stainless steel using Cu, Ag, and Ti-based brazes. J Mater Sci Lett2000; 43: 23–32.
12.
HansonWBIronsideKIFernieJA. Active metel brazing of zirconia. Acta Mater2000; 48: 4673–4676.
13.
HaoHQWangYLJinZHet al.Joining of zirconia to zirconia using Ag–Cu–Ti filler metal. J Mater Process Technol1995; 52: 238–247.
14.
DurovAVKostjukBDShevchenkoAVet al.Joining of zirconia to metal with Cu–Ga–Ti and Cu–Sn–Pb–Ti fillers. Mater Sci Eng A2000; 290: 186–1899.
15.
SinghMShpargelTPAsthanaR. Yttria-stabilized zirconia using gold-based brazes for solid oxide fuel cell applications. Int J Appl Ceram Technol2007; 4: 119–133.
16.
SinghMShpargelTPAsthanaR. Braze oxidation behavior and joint microstructure in YSZ/steel joints made using palladium brazes for SOFC applications. Mater Sci Eng A2008; 485: 695–702.
17.
SteeleBCH. Material science and engineering: The enabling technology for the commercialization of fuel cell systems. J Mater Sci2001; 36: 1053–1068.
18.
JiangWTuSTLiGCet al.Residual stress and plastic strain analysis in the brazed joint of bonded compliant seal design in planar solid oxide fuel cell. J Power Sources2010; 195: 3513–3522.
19.
LinCKChenJYTianJWet al.Joint strength of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect. J Power Sources2012; 205: 307–317.
20.
LinCKLinKLYehJHet al.Creep rupture of the joint of a solid oxide fuel cell glass–ceramic sealant with metallic interconnect. J Power Sources2014; 245: 787–795.
21.
GoelATulyaganovDUKhartonVVet al.Electrical behavior of aluminosilicate glass-ceramic sealants and their interaction with metallic solid oxide fuel cell interconnects. J Power Sources2010; 19: 522–526.
22.
MenzlerNHSeboldDZahidMet al.Interaction of metallic SOFC interconnect materials with glass–ceramic sealant in various atmospheres. J Power Sources2005; 152: 156–167.
23.
ChangHTLinCKLiuCKet al.High-temperature mechanical properties of a solid oxide fuel cell glass sealant in sintered forms. J Power Sources2011; 196: 3583–3591.
24.
Stover D, Dieckmam U, Flesch U, et al. In: Singhal SC and Dokiya M (eds) Solid oxide fuel cells (SOFC-VI), PV 99-19. Pennington, NJ: Electrochemical Society, 1999. p. 812.
25.
BatfalskyPHaanappelVACMalzbenderJet al.Chemical interaction between glass–ceramic sealants and interconnect steels in SOFC stacks. J Power Sources2006; 155: 128–137.
