This paper develops a new physically based model to investigate face centered cubic (FCC) metals and alloys under high strain rate loadings (\gt104 s−1) which includes kinematics and constitutive equations for the propagation of elastic and steady plastic waves. The model’s formulations are based on the rate of the conservation energy law that includes the rate of the input energy, internal energy, and entropy generation. This formulation is obtained by incorporating the viscous drag effects and associating the entropy generation to the generation, glide, and annihilation of dislocations. The model is used for 6061-T6 aluminum alloys and the results are verified with the published theoretical models and experimental tests. Also, the effect of different parameters, such as the particle velocity, shear flow stress, shear strain rate and temperature are investigated. As a result, the presented model shows good capability in describing the mentioned parameters.
MeyersMA. Dynamic behavior of materials, 1st ed. New Jersey, USA: Wiley, 1994.
2.
SedighiMKhandaeiShokrollahiH. Identification of optimized constitutive model parameters at a high strain rate using electromagnetic ring expansion test results. Proc IMechE, Part C: J Mechanical Engineering Science2011; 225: 781–789.
3.
CeschiniLMorriAOraziL. High strain rate superplasticity in aluminium matrix composites. Proc IMechE, Part L: J Materials: Design and Applications2002; 216: 43–48.
4.
MahfuzHAl MamunWAustinLet al.New formulations for the Hopkinson bar technique to extract a response of the constituent material in composite specimens. Proc IMechE, Part L: J Materials: Design and Applications2001; 215: 15–27.
5.
Cowper GR and Symonds PS. Strain hardening and strain rate effects in the impact loading of cantilever beams. Report no. 28, Division of Applied Mechanics, Brown University, 1952.
6.
Johnson GR, Cook WH. A constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures. In: 7th International Symposium on ‘Ballistics’, Hague, The Netherlands, 1983, pp.541–547.
7.
KloppRWCliftonRJShawkiTG. Pressure-shear impact and the dynamic viscoplastic response of metals. Mech Mater1985; 4: 375–385.
8.
GaoCYZhangLC. A constitutive model for dynamic plasticity of FCC metals. Mater Sci Eng A2010; 527: 3138–3143.
9.
KlepaczkoJR. Thermally activated flow and strain rate history effects for some polycrystalline fcc metals. Mater Sci Eng A1975; 18: 121–135.
10.
MeckingHKocksUF. Kinetics of flow and strain-hardening. Acta Metall1981; 29: 1865–1875.
11.
VoyiadjisGZAbedFH. Microstructural based models for bcc and fcc metals with temperature and strain rate dependency. Mech Mater2005; 37: 355–378.
12.
VoyiadjisGZAlmasriAH. A physically based constitutive model for fcc metals with applications to dynamic hardness. Mech Mater2008; 40: 549–563.
13.
ZerilliFJArmstrongRW. Dislocation-mechanics-based constitutive relations for material dynamics calculations. J Appl Phys1987; 61: 1816–1825.
14.
KlepaczkoJR. Thermally activated flow and strain rate history effects for some polycrystalline fcc metals. Mater Sci Eng1975; 18: 121–135.
15.
MeckingHKocksUF. Kinetics of flow and strain-hardening. Acta Metall1981; 29: 1865–1875.
16.
FollansbeePSKocksUF. A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metallurg1998; 36: 81–93.
17.
MughrabiH. A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals. Mater Sci Eng1986; 85: 15–31.
18.
NesE. Modelling of work hardening and stress saturation in fcc metals. Prog Mater Sci1998; 41: 129–193.
19.
FieldJEWalleySMProudWGet al.Review of experimental techniques for high rate deformation and shock studies. Int J Impact Eng2004; 30: 725–775.
20.
SwegleJWGradyDE. Shock viscosity and the prediction of shock rise times. J Appl Phys1985; 58: 692–701.
21.
MolinariARavichandranG. Constitutive modeling of high-strain-rate deformation in metals based on the evolution of an effective microstructural length. Mech Mater2004; 37: 737–752.
22.
KanelGIAsayJRBaumungK. Applications of the ion beam technique for investigations of hypervelocity impacts. Int J Impact Eng1999; 23: 421–430.
TongWCliftonRJ. Pressure-shear impact investigation of strain rate history effects in oxygen-free high-conductivity copper. J Mech Phys Solid1992; 40: 1251–1294.
26.
Grunschel SE. Pressure-shear plate impact experiments on high-purity aluminum at temperatures approaching melt. PhD Thesis. Brown University, 2009.
27.
SteinbergDJCochranSGGuinanMW. A constitutive model for metals applicable at high-strain rate. J Appl Phys1980; 51: 1498–1504.
28.
WallaceDC. Flow process of weak shock waves. Phys Rev B1980; 22: 1487–1494.
29.
JohnsonJNBarkerLM. Dislocation dynamics and steady plastic wave profiles in 6061-T6 Aluminum. J Appl Phys1969; 40: 4321–4334.
30.
CliftonRJOn the analysis of elastic/visco-plastic waves of finite uniaxial strain. In: BurkeJJWeissV (eds). Shock waves and the mechanical properties of solids, Syracuse, NY: Syracuse University Press, 1970, pp. 73–116.
31.
AustinADMcDowellDL. A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates. Int J Plast2011; 27: 1–24.
32.
AustinADMcDowellDL. Parameterization of a rate-dependent model of shock-induced plasticity for copper, nickel, and aluminum. Int J Plast2012; 32-33: 134–154.
33.
GaoCYZhangLC. Constitutive modelling of plasticity of fcc metals under extremely high strain rates. Int J Plast2012; 32–33: 121–133.
34.
ArmstrongRWArnoldWZerilliFJ. Dislocation mechanics of shock-induced plasticity. Metall Mater Trans A2007; 38 A: 2605–2610.
35.
ArmstrongRWArnoldWZerilliFJ. Dislocation mechanics of copper and iron in high rate deformation tests. J Appl Phys2009; 105: 1–7.
36.
HuangMRivera-Diaz-del-Castillo PedroEJBouazizOet al.A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics. Mech Mater2009; 41: 982–988.
37.
HuangMRivera-Diaz-del-CastilloPEJvan der ZwaagS. Modelling steady state deformation of fcc metals by nonequilibrium thermodynamics. Mater Sci Technol2007; 23: 1105–1108.
38.
RiceMHMcQueenRGWalshJM. Solid state physics, San Diego: Academic, 1958, pp. 1–10.
39.
MarshSP. LASL shock hugoniot data, Berkeley, CA: University of California Press, 1980.
