New high-strength low-alloy steels with improved mechanical properties and processability using materials by design

Abstract

New materials are traditionally developed using costly and time-consuming trial and error experimental efforts. This is followed by an even lengthier material-certification process. Consequently, it takes 10–20 years before a newly discovered material is commercially employed. An alternative approach to the development of new materials is the so-called materials-by-design approach within which a material is treated as a complex system and its design and optimization is carried out by employing computer-aided engineering analyses, predictive tools and available material databases. In the present work, the materials-by-design approach is utilized to redesign a grade of high-strength low-alloy steels with improved mechanical properties (primarily strength and fracture toughness), processability (e.g. castability, hot formability and weldability) and corrosion resistance. Toward that end, a number of material thermodynamics, kinetics of phase transformations, and physics of deformation and fracture computational models and databases have been developed/assembled and utilized within a multidisciplinary, two-level material-by-design optimization scheme. To validate the models, their prediction is compared against the experimental results for the related steel high-strength low-alloy 100. Then the optimization procedure is employed to determine the optimal chemical composition and the tempering schedule for a newly designed high-strength low-alloy steel grade with enhanced mechanical properties, processability and corrosion resistance.

Keywords

High-strength low-alloy steels materials-by-design approach materials design materials: mechanical properties/strength materials modelling

Get full access to this article

View all access options for this article.

References

Cohen M and Hansen SS. On the fundamentals of HSLA steels. In: HSLA steels: metallurgy and applications, Beijing, China, 4–8 November 1985, ASM International, 1985, pp.61–71.

Czyryca EJ. Development of low-carbon, copper-strengthened HSLA steel plate for naval ship construction, DTRC-SME-90/21, June 1990.

Le May

Schekty

. Copper in iron and steel, New York: John Wiley and Sons, 1982.

Holdren

. Materials genome initiative for global competitiveness, Washington, DC: Office of Science and Technology Policy, 2011.

Drosback M. The materials genome initiative and materials innovation infrastructure (Presentation), Washington, DC: Office of Science and Technology Policy, September 5, 2013, https://hubzero.org/resources/1167/download/Cyberinfrastructure_for_the_Materials_Genome_Initiative.pdf (accessed 20 February 2014).

Saha

Olson

. Computer-aided design of transformation toughened blast resistant naval hull steels: Part I. J Comput Aided Mater Des 2007; 14: 177–200.

Saha

Olson

. Prototype evaluation of transformation toughened blast resistant naval hull steels: Part II. J Comput Aided Mater Des 2007; 14: 201–233.

Takeuchi

. Solid-solution strengthening in single crystals of iron alloys. J Phys Soc Jpn 1969; 27: 929–940.

Leslie

. Iron and its dilute substitutional solid solutions. Metall Trans 1972; 3: 5–25.

10.

Takahashi

Bhadeshia

HKDH

. Model for transition from upper bainite to lower bainite. Mater Sci Technol 1990; 6: 592–603.

11.

Ghosh

Olson

. Kinetics of FCC-BCC heterogeneous martensitic nucleation – I. The critical driving force for athermal nucleation. Acta Mater 1994; 42: 3361–3370.

12.

Sundman

Jansson

Andersson

. The Thermo-Calc databank system. Calphad 1985; 9: 153–190.

13.

Saha A. Systems design of transformation-toughened blast-resistant naval hull steels. Doctoral Dissertation, Northwestern University, Chicago, IL, 2004.

14.

Wise J. Systems design of advanced gear steels. Doctoral dissertation, Northwestern University, Chicago, IL, 1998.

15.

Grujicic

. Coherent precipitation of M₂C carbides in AF1410 steel. Mater Sci Eng A 1989; 117: 215–220.

16.

Grujicic

. Thermodynamics aided design of high Co-Ni secondary hardening steels. Calphad 1990; 14: 49–59.

17.

Russell

Brown

. A dispersion strengthening model based on differing elastic moduli applied to the iron-copper system. Acta Metall 1972; 20: 969–974.

18.

Grujicic

. Stabilization of precipitated austenite in tempered Fe-Mn-C steels. Mater Sci Eng A 1990; 127: 79–84.

19.

Grujicic

. Design of precipitated austenite for dispersed-phase transformation toughening in high strength Co-Ni steels. Mater Sci Eng A 1990; 128: 201–207.

20.

Grujicic

Zhou

. Analysis of Fe-Ni-Cr-N austenite using the embedded-atom method. Calphad 1993; 17: 383–413.

21.

Grujicic

Haidemenopoulos

. A treatment of paraequilibrium thermodynamics in AF1410 steel using the thermocalc software and database. Calphad 1988; 12: 219–224.

22.

Grujicic

Zhou

. Atomistic simulation of thermally activated glide of dislocations in Fe-Ni-Cr-N austenite. Mater Sci Eng A 1995; 190: 87–98.

23.

Olson

Mechanically-induced phase transformations in alloys. In: Bever

(ed). Encyclopedia of materials science and engineering, New York: Pergamon Press, 1986, pp. 2929–2932.

24.

Leal RH. Transformation toughening of metastable austenitic steels. Doctoral Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1984.

25.

Stavehaug F. Transformation toughening of γ′-strengthened metastable austenitic steels. Doctoral Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1990.

26.

Socrate S. Mechanics of microvoid nucleation and growth in high-strength metastable austenitic steels. Doctoral Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1995.

27.

Haidemenopoulos G. Dispersed-phase transformation toughening in ultrahigh-strength steels. Doctoral Thesis, Massachusetts Institute of Technology, Cambridge, MA, 1988.

28.

Kaufmann

Cohen

. The martensitic transformation in the iron-nickel system. Trans AIME J Met 1956; 206: 1393–1401.

29.

Ghosh

Olson

. Kinetics of FCC-BCC heterogeneous martensitic nucleation – II. Thermal activation. Acta Mater 1994; 42: 3371–3379.

30.

Olson

Owen

. Martensite, Materials Park. OH: ASM International, 1992.

31.

Scheil

. Bemerkungen zur Schichtkristallbildung. Zeitschrift für Metallkunde 1942; 34: 70–72.

32.

The MathWorks Inc., MA. MATLAB, Version 8.1.0.604, R2013.

33.

Grujicic

Snipes

Ramaswami

et al.

All-atom molecular-level analysis of the ballistic-impact-induced densification and devitrification of fused silica. J Nanomater 2015; 2015: Article ID 650625–Article ID 650625.

34.

Grujicic

Chittajallu

Walsh

. Optimization of the VARTM process for enhancement of the degree of devolatilization of polymerization by-products and solvents. J Mater Sci 2003; 38: 3729–3739.

35.

Gore M, Grujicic M and Olson GB. Thermally Activated Grain Boundary Motion Through a Dispersion of Particles. Acta Metall 1989; 37: 2849–2854.

36.

Grujicic M, Chenna V, Galgalikar R, et al. Wind-turbine gear-box roller-bearing premature-failure caused by grain-boundary hydrogen embrittlement. J Mater Eng Perform 2014; 23: 3984–4001.

37.

Grujicic M, Ramaswami S, Yavari R, et al. Multi-physics computational analysis of white-etch cracking failure mode in wind-turbine gear-box bearings. J Mater: Des Appl. 2017; 230: 43–63.

38.

Grujicic M, Chenna V, Galgalikar R, et al. Computational analysis of gear-box roller-bearing white-etch cracking: a multi-physics approach. Inter J Struct Integrity 2014; 5: 290–327.

39.

Grujicic M, Chenna V, Yavari R, et al. Multi-length scale computational analysis of roller-bearing premature failure in horizontal-axis wind-turbine gear-boxes. Inter J Struct Integrity 2015; 5: 40–72.