Microscale deformation behavior of rheocast Al–7Si

Abstract

In the present work, microscale deformation behavior, plastic strain localization, and plastic instability of rheocast Al–Si–Mg (A356) alloy have been investigated using micromechanical approach. For this purpose, two-dimensional microscale models (representative volume elements) have been developed using actual microstructure of the cast samples made under three different process conditions. Microstructure of the above-mentioned alloy consists of two different phases, such as aluminum-rich primary phase and silicon-rich eutectic phase. In line with that, composite micromechanical models have been developed to analyze them within the finite element framework. Rheocasting has been performed using cooling slope with two different slope angles of 45° and 60°, and comparison has been made with the conventional cast samples of the alloy that has been cast directly from the superheated molten state. Different boundary conditions have been assumed to perform finite element based simulation, using a popular finite element solver ABAQUS, depending upon the position of representative volume elements on the cylindrical tensile specimen. Under uniaxial tensile loading, ductile failure mode is predicted in the form of plastic strain localization due to incompatible deformation between the phases. This indicates inhomogenity of microstructure that determines the damage initiation process within this material, as there is no damage or failure criterion specified during the finite element analysis. Grain size, shape, and orientation of the primary aluminum phase are found to play a vital role on deformation behavior and failure mode of the materials investigated in this study.

Keywords

Rheocasting cooling slope microstructure micromechanics finite element method Al–Si–Mg alloy

Get full access to this article

View all access options for this article.

References

Ganesh

Chawla

. Effect of particle orientation anisotropy on the tensile behavior of metal matrix composites experiments. Mater Sci Eng A 2005; 391: 342–353.

Shan

Gokhale

. Digital image analysis and microstructure modeling tools for microstructure sensitive design of materials. Int J Plast 2004; 20: 1347–1370.

Fullwood

Niezgoda

Adams

. Microstructure sensitive design for performance optimization. Prog Mater Sci 2010; 55: 477–562.

Paul

. Micromechanics based modeling of dual phase steels: Prediction of ductility and failure modes. Comput Mater Sci 2012; 56: 34–42.

Tewari

Tiwari

Biswas

. Vectorized 3D microstructure for finite element simulations. Mater Charact 2010; 61: 1211–1220.

Paul

Kumar

. Micromechanics based modeling to predict flow behavior and plastic strain localization of dual phase steel. Comput Mater Sci 2012; 63: 66–74.

Gokhale

Yang

. Application of image processing for simulation of mechanical response of multi-length scale microstructures of engineering alloys. Metall Mater Trans A 1999; 30A: 2369–2381.

Genclap

Saklakoglu

. Semisolid microstructure evolution during cooling slope casting under vibration of A380 aluminum alloy. Mater Manuf Process 2010; 25: 943–947.

Das

Samanta

Chattopadhyay

. Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope. Mater Sci Technol 2013; 29: 83–92.

10.

Sun

Choi

Liu

. Predicting failure modes and ductility of dual phase steels using plastic strain localization. Int J Plast 2009; 25: 1888–1909.

11.

Brokenbrough

Hunt

. A reinforced material model using actual microstructural geometry. Scripta Metall Mater 1992; 27: 385–390.

12.

Wulf

Steinkopff

Fischmeister

. Fe-simulation of crack paths in the real microstructure of an Al(6061)/SiC composite. Acta Mater 1996; 44: 1765–1779.

13.

Al-Ostaz

Jasiuk

. The influence of interface and arrangement of inclusions on local stresses in composite materials. Acta Mater 1997; 45: 4131–4143.

14.

Jarvstrat

. An ellipsoidal unit cell for the calculation of micro-stresses in short fibre composites. Comput Mater Sci 1993; 1: 203–212.

15.

Borbely

Biermann

Hartmann

. FE investigation of the effect of particle distribution on the uniaxial stress–strain behaviour of particulate reinforced metal-matrix composites. Mater Sci Eng A 2001; 313: 34–45.

16.

Paul

. Real microstructure based micromechanical model to simulate microstructure level deformation behavior and failure initiation in DP 590 steel. Mater Des 2013; 44: 397–406.

17.

Ramazani

Mukherjee

Quade

. Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach. Mater Sci Engineering A 2013; 560: 129–139.

18.

Ramazani

Mukherjee

Abdurakhmanov

. Micro–macro-characterisation and modelling of mechanical properties of gas metal arc welded (GMAW) DP600 steel. Mater Sci Eng A 2014; 589: 1–14.

19.

Gudlura

Boczekc

Radovica

. On characterizing the mechanical properties of aluminum–alumina composites. Mater Sci Eng A 2014; 590: 352–359.

20.

Nafisi

Lashkari

Ghomashchi

. Microstructure and rheological behavior of grain refined and modified semi-solid A356 Al–Si slurry. Acta Mater 2006; 54: 3503–3511.

21.

Das

Samanta

Ray

. Mechanical properties and tensile fracture mechanism of rheocast a356 al alloy using cooling slope. Adv Mater Res 2012; 585: 354–358.

22.

Fan

Jar

PYB

Cheng

JJR

. Prediction of energy release rates for crack growth using fem-based energy derivative technique. Eng Fract Mech 2007; 74: 1243–1254.

23.

Lasko

Apel

Carre

. Effect of microstructure and hydrogen pores on the mechanical behavior of an Al7%Si0.3%Mg alloy studied by a combined phase-field and micromechanical approach. Adv Eng Mater 2012; 14: 236–247.

24.

ABAQUS. Abaqus user’s manual 17.1. Version 6.10, 2010.

25.

Dieter

. Mechanical metallurgy, SI metric edition. New York: McGraw Hill Book Company, 1988, pp. 8–8.

26.

Tabor

. The hardness of metals, New York: Oxford University Press, 1951.

27.

Suwanprateeb

. Calcium carbonate filled polyethylene: correlation of hardness and yield stress. Compos Part A: Appl Sci Manuf 2000; 31: 353–359.

28.

Gasko

Rosenberg

. Correlation between hardness and tensile properties in ultra-high strength dual phase steels. Mater Eng 2011; 18: 155–159.

29.

Pavlina

Tyne

CJV

. Correlation of yield strength and tensile strength with hardness for steels. J Mater Eng Perform 2008; 17: 888–893.

30.

Katani

Madadi

Atapour

. Micromechanical modelling of damage behaviour of Ti–6Al–4V. Mater Des 2013; 49: 1016–1021.

31.

Choi

Liu

Sun

. Microstructure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions. Acta Mater 2009; 57: 2592–2604.

32.

Antolovicha

Armstrong

. Plastic strain localization in metals: Origins and consequences. Prog Mater Sci 2014; 59: 1–160.

33.

Stepanov

Babutskii

. Strain localization kinetics in a metal strip in tension. SOM 2005; 37: 515–524.

34.

Das

Samanta

Chattopadhyay

. Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy. Acta Metall Sin 2012; 25: 329–339.

35.

Kim

Ryu

. Finite element analysis of the onset of necking and the post-necking behaviour during uniaxial tensile testing. Mater Trans 2005; 46: 2159–2163.

36.

Grujicic

Erturk

Owen

. A finite element analysis of the effect of the accommodation strains in the ferrite phase on the work hardening of a dual-phase steel. Mater Sci Eng 1986; 82: 151–159.

37.

Ilie

O’Donnell

McGarry

. Computational modelling of the extrusion of an Al–SiC metal matrix composite using macroscale and microscale methods. J Strain Anal Eng Des 2007; 42: 237–252.

38.

Horstemeyer

. Damage influence on Baushinger effect of a cast A356 aluminum alloy. Scripta Mater 1998; 39: 1491–1495.

39.

Das

Singh

Jayaganthan

. Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM. Int J Mater Prod Technol 2012; 44: 252–276.

40.

Das

Singh

Jayaganthan

. An experimental evaluation of material properties and fracture simulation of cryorolled 7075 Al alloy. J Mater Eng Perform 2012; 21: 1167–1181.

41.

Das

Samanta

Venkatpathi

BRK

. Microstructural evolution of A356 Al alloy during flow along a cooling slope. Trans Ind Inst Met 2012; 65: 669–672.

42.

Das

Dutta

Samanta

. Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image texture analysis. J Eng Manuf 2013; 227: 1474–1483.

43.

Kim

Thomas

. Effect of morphology on the mechanical behavior of a dual phase Fe/2Si/0. J Metall Trans A 1981; 12: 483–489.

Microscale deformation behavior of rheocast Al–7Si–0.3 Mg alloy

Abstract

Keywords

Get full access to this article

References