Selection of arbitrarily scaled cross-sections in bending stiffness design

Abstract

Performance indices can be used to model the relative structural efficiency of different cross-sectional shapes. Performance indices have been previously defined mainly for structural cross-sections that are scaled proportionally in size. This paper extends the method of performance indices by allowing scaling of cross-sections in any direction. A novel feature of the method described in this paper is the inclusion of the space envelope as a design parameter. The first part of the paper gives a derivation of the general solution for the performance index. The second part presents a graphical selection procedure and discusses the efficiency limits of cross-sections due to buckling instability. It concludes with a case study to demonstrate the method.

Keywords

optimal shape performance index arbitrary scaling constrained design structural efficiency

Get full access to this article

View all access options for this article.

References

Cox

H. L.

The Design of Structures of Least Weight, 1965 (Pergamon Press, Oxford).

Shanley

F. R.

Weight-strength Analysis of Aircraft Structures, 2nd edition, 1960 (Dover, New York).

Caldwell

J. B.

Woodhead

R. G.

Ship structures: Some possibilities for improvement

North East Cost Institution—Institution Engineers & Shipbuilders—Transacton, 1973, 89, 101–120.

Parkhouse

J. G.

Structuring a process of material dilution. Proc. 3rd Int. Conf. on Space Structures, 1984, 367–374.

Parkhouse

J. G.

Sepangi

H. R.

Macromaterials In Building the Future (Eds Garas

Armer

Clarke ), 1993, pp. 1–13 (E & F.N. Spon, London).

Parkhouse

J. G.

Damage accumulation in structures

Reliability Engineering, 1987, 17, 97–109.

Ashby

M. F.

Materials and shape

Acta Metall. Mater., 1991, 39 (6), 1025–1039.

Ashby

M. F.

Materials Selection in Mechanical Design, 1st edition, 1992 (Pergamon Press, Oxford).

Ashby

M.F.

Materials Selection in Mechanical Design, 2nd edition, 1999 (Pergamon Press, Oxford).

10.

Birmingham

R. W.

A graphical exploration of the interaction between material and form in structural design. Doctoral thesis, University of Newcastle-upon-Tyne, 1994.

11.

Burgess

S. C.

Shape factors and materials indices for dimensionally constrained structures. Part 1: Beams

Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1998, 212 (C2), 129–140.

12.

Pasini

Burgess

S. C.

Smith

D. J.

Performance indices for arbitrarily scaled rectangular cross-sections in bending stiffness design

Proc. Instn Mech. Engrs, Part L: J. Materials: Design and Applications, 2001, 216, 1–13.

13.

Charles

J. A.

Crane

F. A. A.

Selection and Use of Engineering Materials, 2nd edition, 1989 (Butterworth-Heinemann, Oxford).

14.

Weaver

Ashby

M. F.

Material limits for shape efficiency. J. Engng Des., 1996, 7 (2), 129–150.

15.

Weaver

Ashby

M. F.

The optimal selection of material and section-shape

Progress Mater. Sci., 1997, 41, 61–128.