Previous studies have suggested that weld microstructure may be modified by the presence of static stresses. In this investigation, vibratory stress was applied to mild steel specimens while they were being welded to observe its effect on the residual stress, microstructure and hardness of the material. Residual stresses were found to decrease in response to vibration whether it was applied during welding or after welding. It was found that the applied stress influenced the grain growth process in the weld. As a result of the treatment the hardness of the material was found to be increased by 25 per cent.
TewariS. P.ShankerA.Effect of longitudinal vibration on the mechanical properties of mild steel weldmentsProc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 1993, 207 (B3), 173–177.
2.
MunsiA. S.M.Y.Investigation and validation of vibratory methods for stress relieving and weld conditioning. PhD thesis, University of Strathclyde, Glasgow, February 1999.
3.
AokiS.NishimuraT.Analytical model improvement of residual stress of welding joint using vibration. In Proceedings of the 1995 Joint ASME-JSME Pressure Vessels and Piping Conference, Honolulu, Hawaii, 23–27 July 1995, Current Topics in Computational Mechanics, 1995, PVP-Vol. 305, pp. 75–79 (American Society of Mechanical Engineers, New York).
4.
AokiS.NisimuraT.HiroiT.AmanoY.Reduction of residual stress of welded joint using vibrationNippon Kikai Gakkai Ronbunshu C (Trans. Japan Soc. Mech. Engrs C), 1995, 61 (592), 4800–4804.
5.
MaekawaY.NakagiriA.MaedaH.The behaviour of surface residual stress relief and lattice defect density with mechanical vibration in FC 25 cast ironNippon Kikai Gakkai Ronbunshu A, 1986, 52 (477), 1295–1299.
6.
NakagiriA.MaedaH.KitaM.The behaviour of vibrational surface residual stress relief in FC 25 cast ironNippon Kikai Gakkai Ronbunshu A, 1984, 50 (452), 751–757.
7.
BühlerH.PfalzgrafH. G.Investigation into the reduction of residual welding stresses by alternating stress tests or mechanical vibrationSchweisse Schreiden, 1964, 16 (5), 178–184.
8.
ShankerS.WoodW. E.KhanK. H.Effect of vibratory stress relief treatments on residual stress in mild steel butt welds. In Proceedings of the 12th National SAMPE Technical Conference, 7–9 October 1980, pp. 776–786.
9.
SonsinoS. M.MüllerF.de BackJ.GresnigtA. M.Influence of stress relieving by vibration on the fatigue behaviour of welded joints in comparison to post-weld heat treatmentFatigue Fracture Engng Mater. Structs, 1996, 19 (6), 703–708.
10.
WozneyG. P.CrawmerG. R.An investigation of vibration stress relief in steelWeld. Res. Suppl., 1968, 23 (9), 411–419.
11.
HouckF.Putting vibration to workMech. Engng, 1966, 88 (9), 48–50.
12.
BotrosB. M.Residual stresses in welded steel structure. II. SME technical paper MF80–305, 1980.
FenghuaS.DexinF.Tests of residual stress on welded structure under vibratory stress reliefJ. Dalian Univ. Technol., August 1994, 34 (4), 390–393.
15.
BhadeshiaH. K.D.H.Possible effects of stress on steel weld microstructure In Mathematical Modelling of Weld Phenomena., Vol. 2, 1995, pp. 71–118 (Institute of Materials, London).
16.
CampbellJ.Effect of vibration during solidificationInt. Metals Rev., 1981, 26 (2), 71–108.
17.
EasterlingK.Introduction to the Physical Metallurgy of Welding, 1992 (Butterworth-Heinemann, Oxford).
