Experimental and numerical analyses of thermomechanical refractory lining behaviour

Abstract

Refractory linings are used in order to protect the steel structure in industrial applications such as coal-fired power plants or steel ladles. These linings are subjected to important thermal loading that can lead to cracking (due to the difference between the thermal expansion of steel and the thermal expansion of the refractory). The aim of this study is to build a tool that allows the structural design to be improved so as to decrease the refractory cracking. The first approach is developed on a local scale. A special furnace allows the reproduction of the thermal conditions in a coal-fired plant. Acoustic emission is employed to detect when the refractory is cracking. A finite element analysis, using three-dimensional elements and a smeared-crack model, is conducted to reproduce the experimental observations. The material behaviour is identified using an inverse method. This local approach can be directly used for structural analyses when the geometry of the lining is sufficiently simple. For instance, the computation of a steel ladle is presented. When the geometry of the lining is very complex, it is not possible to compute it with this three-dimensional model. In this case, a simplified approach using a two-layered composite shell, the behaviour of which is equivalent to the three-dimensional behaviour, is briefly described.

Keywords

refractory linings thermal loading smeared crack model finite elements inverse identification equivalent composite shell

Get full access to this article

View all access options for this article.

References

Gordon

E. D.

Refractories in CFB applications. In Proceedings of the 12th International Conference on

Fluidized Bed Combustion, San Diego, California, 1993, pp. 967–983.

Poirier

Recent tendencies in refractories in relation with service in the steel industry. In Proceedings of the 39th Colloquium on

Refractories, Aachen, Germany, 1996, pp. 6–16.

Peruzzi

Poirier

Glandus

J. C.

Huger

Numerical study of the in-serve behaviour of refractory parts used in continuous casting. In Proceedings of the Sixth ECERS Conference, Brighton, 1999, pp. 161–162 (European Ceramic Society).

Andrieux

Gabis

Gasser

Boisse

Rezakhanlou

Castable anchoring optimization to improve service life of refractory linings. In Proceedings of the Unified International Technical Conference on

Refractories’ 97, New Orleans, Louisiana, 1997, pp. 317–326.

Mamdy-Andrieux

Analyse et simulation des contraintes d'origine thermique sur des structures réfractaires de centrales LFC. PhD thesis, University of Orléans, France, 1999.

Lemaistre

Etude des propriétes thermomécaniques de divers réfractaires. PhD thesis, Institut National des Sciences Appliquées, Lyon, France, 1998.

Bazant

Z. P.

Instability, ductility and size effect in strain-softening concrete

J. Engng Mechanics Div., Am. Soc. Civ. Engrs, 1976, 102 (2), 331–344.

Petersson

P. E.

Crack growth development of fracture zones in plain concrete and similar materials. Report TVBM-1006, Division of Building Materials, Lund Institute of Technology, 1985.

Cotterell

Mai

Y. W.

Fracture Mechanics of Cementitious Materials, 1996 (Blackie, London).

10.

Crisfield

M. A.

Non-linear Finite Element Analysis of Solids and Structures, Advanced Topics, Vol. 2, 1997, pp. 135–157 (John Wiley, New York).

11.

Hillerborg

Modeer

Petersson

P. E.

Analysis of crack formation and growth in concrete by means of fracture mechanics and finite elements

Cement Concr. Res., 1976, 6, 773–782.

12.

Weihe

Kröplin

de Borst

Classification of smeared crack models based on materials and structural properties

Int. J. Solids Structs, 1998, 35 (12), 1289–1308.

13.

Rashid

Y. R.

Ultimate strength analysis of prestressed concrete pressure vessels

Nucl. Engng Des., 1968, 7, 334–344.

14.

Cope

R. J.

Rao

P. V.

Clark

L. A.

Norris

Modelling of reinforced concrete behaviour for finite element analyses of bridge slabs

In Numerical Methods for Nonlinear Problems I (Eds Taylor ), 1980, pp. 457–470.

15.

Litton

R. W.

A contribution to the analysis of concrete structures under cyclic loading. PhD thesis, University of California, Berkeley, 1976.

16.

De Borst

Nauta

Non-orthogonal cracks in a smeared finite element model

Engng Comput., 1985, 2, 35–46.

17.

Theoretical Manual of ABAQUS Code, Version 5.7, 1997 (Hibbitt, Karlsson and Sorensen, Pawtucket, Rhode Island).

18.

Levenberg

A method for the solution of certain non-linear problems in least squares

Q. Appl. Math., 1944, 2, 164–168.

19.

Marquardt

D. W.

An algorithm for least squares estimation of nonlinear parameters

J. Soc. Ind. Appl. Math., 1963, 11 (2), 431–441.

20.

Schnur

D. S.

Zabaras

An inverse method for determining elastic material properties and a material interface

Int. J. Numer. Meth. Engng, 1992, 33, 2039–2057.

21.

Derré

Gasser

Boisse

Poche à acier de 270 tonnes à tenue améliorée. Report for Usinor, 2000.

22.

Andrieux

Boisse

Dutheillet

Gabis

Gasser

Rousseau

Modelling and design of an anchored refractory lining. In Proceedings of the Unified International Technical Conference on

Refractories ‘99, Berlin, Germany, 1999, pp. 10–12.