Unified dynamics analysis of parallel manipulators: A joint-based approach and generalized inertia constraint matrix for parallel manipulators (GICM-P) framework

Abstract

Parallel manipulators, a distinctive subset of closed-loop multi-body systems, are in high demand due to their precision-centric applications. This research introduces a unified approach to tackle both inverse and forward dynamic analyses of parallel manipulators, rooted in joint-based principles. The methodology dissects a given parallel manipulator into symmetric open-loop subsystems and a mobile body within either a planar or spatial context, depending on the manipulator’s nature. Conventional practices, involving the introduction of joint cuts at relevant locations, are employed to partition the system into multiple open-loop subsystems. Subsequently, the joint coordinate-based approach, typically applied to open-loop systems such as industrial manipulators, is utilized to derive solutions. In particular, this approach focuses on forward dynamics by introducing the generalized inertia constraint matrix for parallel manipulators (GICM-P), a concept built upon the authors’ prior work, originally addressing the GICM for general closed-loop systems. Notably, GICM-P aligns conceptually with the operational space inertia matrix (OSIM) designed for closed-loop systems elsewhere. However, unlike OSIM, which requires mapping joint-space inertia to operational-space inertia, GICM-P leverages acceleration-level constraints between subsystems and the moving platform through straightforward matrix operations. GICM-P offers a deeper understanding of the physics of the problem compared to OSIM, primarily due to its ability to explicitly express subsystem-level interactions via various block matrices – an aspect not previously documented. The paper provides explicit numerical values for GICM-P in the context of a spatial six degrees of freedom (6-DOF) Stewart platform and a planar 3-DOF parallel manipulator along with interpretations.