In this paper, for double row angular contact ball bearing, a five-degrees-of-freedom bearing analysis model based on quasi-statics is proposed. This model is used to study the influence of structural parameters and service conditions on the tilt angle and limit tilt angle of the bearing. The results show that the radial clearance will increase the ultimate tilt angle. The coincidence degree between the roller and the inner raceway will reduce the ultimate tilt angle, but the coincidence degree between the roller and the outer raceway has the opposite effect. The increase in the external load of the bearing will increase the tilt angle. The moment load has the greatest effect on the tilt angle. The rotation speed of the bearing has no effect on the tilt angle. The coincidence degree between the roller and the raceway will reduce the tilt angle; furthermore, the influence of the coincidence degree between roller and different ring on the tilt angle is also different when different rings are fixed. The tilt angle will decrease with the increase of the initial contact angle, and this effect is more and more obvious. The fixation of different ring has no effect on this influence.
Bo-WenJIMin-QingJHengL,et al.Fatigue life analysis and research on double row angular contact ball bearing. Mach Des Manuf2014: 26–28.
2.
EschmannPHasbargenLWeigandK,et al.Ball and roller bearings: theory, design, and application. Chichester Wiley, 1999.
3.
GunduzA. Multi-dimensional stiffness characteristics of double row angular contact ball bearings and their role in influencing vibration modes. Dissertations & Theses, Gradworks, 2012.
4.
JonesA,B. A general theory for elastically constrained ball and radial roller bearings under arbitrary load and speed conditions. Trans ASME1960; 82: 309.
5.
LangHSheng-GuangZWen-ZhongW, et al.Modeling high-speed angular contact ball bearing under the combined radial, axial and moment loads. Proc IMechE, Part C: J Mech Eng Sci2014; 228: 852–864.
6.
FangBZhangJYanK,et al.A comprehensive study on the speed-varying stiffness of ball bearing under different load conditions. Mech Mach Theory2019; 136: 1–13.
7.
QiangZHaiqinQKejunXU,et al.An improved numerical solution method for mechanical model of angular contact ball bearing. Gas Turbine Technol2018; 31: 41–45.
8.
ZhangJFangBHongJ, et al.Effect of preload on ball-raceway contact state and fatigue life of angular contact ball bearing. Tribol Int2017; 114: 365–372.
9.
ChoiC,SParkJ,YHongS,W. Experimental investigation on stiffness characteristics of angular contact ball bearing. 2013. Proceedings of the Conference of Korean Manufacturing Society, 56–56.
10.
AntoineJFAbbaGMolinariA. A new proposal for explicit angle calculation in angular contact ball bearing. J Mech Des2006; 128: 468–478.
11.
AiniRRahnejatHGoharR. A five degrees of freedom analysis of vibrations in precision spindles. Int J Mach Tools Manuf1990; 30: 1–8.
12.
RahmanAKAiniRGoharR. On the performance of multi-support spindle-bearing assemblies. Proc IMechE, Part K: J Multi-body Dynamics2002; 216: 117–132.
13.
BerceaINéliasDCavallaroG. A unified and simplified treatment of the nonlinear equilibrium problem of double-row rolling bearings - part 1 : rolling bearing model. ARCHIVE Proc IMechE, Part J: J Eng Tribol 1994–1996(vols 208–210)2003; 217: 205–212.
14.
SinghDREffect of bearing preloads on the modal characteristics of a shaft-bearing assembly: experiments on double row angular contact ball bearings. Mech Syst Signal Process2012; 31: 176–195.
15.
GunduzASinghR. Stiffness matrix formulation for double row angular contact ball bearings: analytical development and validation. J Sound Vib2013; 332: 5898–5916.
16.
DengSEDongXCuiYC,et al.Analysis of dynamic stiffness characteristics of double-row angular contact ball bearings. Binggong Xuebao/Acta Armamentarii2015; 36: 1140–1146.
17.
ZhangJFangBHongJ,et al.A general model for preload calculation and stiffness analysis for combined angular contact ball bearings. J Sound Vib2017; 411: 435–449.
18.
LinSJiangS. Study of the stiffness matrix of preloaded double row angular contact ball bearings. J Tribol2018; 141: 032204.
19.
GuJZhangY. Research on modeling and mechanical behaviors of matched angular contact ball bearings. ARCHIVE Proc IMechE, Part C: J Mech Eng Sci 1989–19962020; 203–210: 095440622093703.
20.
ParmarVSaranVHHarshaSP. Nonlinear vibration response analysis of a double-row self-aligning ball bearing due to surface imperfections. Proc IMechE, Part K: J Multi-body Dynamics2020; 234: 514–535.
21.
XuTYangLWuW,et al.Effect of angular misalignment of inner ring on the contact characteristics and stiffness coefficients of double row angular contact ball bearings. Mech Mach Theory2021; 157: 104178.
22.
LiaoNTLinJF. An analysis of misaligned single-row angular-contact ball bearing. J Mech Des2004; 126: 370–374.
23.
XingYXuHPeiS,et al.Mechanical analysis of spherical roller bearings due to misalignments between inner and outer rings. ARCHIVE Proc IMechE, Part C: J Mech Eng Sci 1989–19962016; 203–210: 0954406216643108.
24.
GengKLinS. Effect of angular misalignment on the stiffness of the double-row self-aligning ball bearing. ARCHIVE Proc IMechE, Part C: J Mech Eng Sci 1989–1996(vols 203–210)2019; 234: 095440621988597.
25.
V-CTongHongS-W. Study on the running torque of angular contact ball bearings subjected to angular misalignment. Proc IMechE, Part J: J Eng Tribol2018; 232: 890–909.
26.
KwakJSKimTW. Contact analysis for the critical shoulder height in angular contact ball bearing. Tribol Trans2011; 54: 764–769.
MohammadpourMJohns-RahnejatPMRahnejatH. Roller bearing dynamics under transient thermal-mixed non-Newtonian elastohydrodynamic regime of lubrication. Proc IMechE, Part K: J Multi-body Dynamics2015; 229: 407–423.
29.
AlfaresMSaleemOMajeedM. Analytical study of thermal variation impact on dynamics of a spindle bearing system. Proc IMechE, Part K: J Multi-body Dynamics2019; 233: 871–898.
30.
HertzH. On the contact of elastic solids. J Reine Angew Math1881; 92: 156–171.
