For passenger cars propelled by the dedicated compound power-split hybrid powertrain, driveline oscillations-induced vehicle jerks are often excited during clutch-to-clutch shift operations while drive mode changes. To tackle this issue, a coordinated dynamic surface control is developed by integrating clutch slips and motor torque compensation strategies through trajectories tracking of both clutch slip speed and wheel speed. Uncertainties or disturbances are treated to be additional inputs of the system, and model nonlinearities are considered and implemented in discretized form through lookup tables. A complex simulation model including electro-hydraulic system is proposed and validated via experiments. The coordinated controller is validated by collaborative simulation. Numerical examples are made and simulation results verify that the controller is effective and robust enough against parameters uncertainties.
ZhangXEben LiSPengH, et al.Efficient exhaustive search of power-split hybrid powertrains with multiple planetary gears and clutches. J Dyn Syst Meas Control2015; 137: 121006.
2.
HutchinsonTBurgessSHerrmannG. Current hybrid-electric powertrain architectures: applying empirical design data to life cycle assessment and whole-life cost analysis. Appl Energy2014; 119: 314–329.
3.
SoloukAShakiba-HerfehMAroraJ, et al.Fuel consumption assessment of an electrified powertrain with a multi-mode high-efficiency engine in various levels of hybridization. Energy Convers Manag2018; 155: 100–115.
4.
YangYHuXPeiH, et al.Comparison of power-split and parallel hybrid powertrain architectures with a single electric machine: dynamic programming approach. Appl Energy2016; 168: 683–690.
5.
ZhangXLiC-TKumD, et al.Prius + and Volt-: configuration analysis of power-split hybrid vehicles with a single planetary gear. IEEE Trans Veh Technol2012; 61: 3544–3552.
6.
WuGZhangXDongZ. Powertrain architectures of electrified vehicles: review, classification and comparison. J Franklin Inst2015; 352: 425–448.
7.
LiuYQinDJiangH, et al.Shift control strategy and experimental validation for dry dual clutch transmissions. Mech Mach Theory2014; 75: 41–53.
8.
ZhaoZHeLZhengZ, et al.Self-adaptive optimal control of dry dual clutch transmission (DCT) during starting process. Mech Syst Signal Process2016; 68–69: 504–522.
9.
SongXSunZ. Pressure-based clutch control for automotive transmissions using a sliding-mode controller. IEEE/ASME Trans Mechatronics2012; 17: 534–546.
10.
WalkerPDZhangNTambaR. Control of gear shifts in dual clutch transmission powertrains. Mech Syst Signal Process2011; 25: 1923–1936.
11.
van BerkelKVeldpausFHofmanT, et al.Fast and smooth clutch engagement control for a mechanical hybrid powertrain. IEEE Trans Control Syst Technol2014; 22: 1241–1254.
12.
GaoBZChenHSanadaK, et al.Design of clutch-slip controller for automatic transmission using backstepping. IEEE/ASME Trans Mechatronics2011; 16: 498–508.
13.
HuYTianLGaoB, et al.Nonlinear gearshifts control of dual-clutch transmissions during inertia phase. ISA Trans2014; 53: 1320–1331.
14.
BalauA-ECaruntuC-FLazarC. Simulation and control of an electro-hydraulic actuated clutch. Mech Syst Signal Process2011; 25: 1911–1922.
15.
MengFZhangHCaoD, et al.System modeling, coupling analysis, and experimental validation of a proportional pressure valve with pulsewidth modulation control. IEEE/ASME Trans Mechatronics2016; 21: 1742–1753.
16.
ZengXYangNWangJ, et al.Predictive-model-based dynamic coordination control strategy for power-split hybrid electric bus. Mech Syst Signal Process2015; 60–61: 785–798.
17.
HongSChoiWAhnS, et al.Mode shift control for a dual-mode power-split-type hybrid electric vehicle. Proc Inst Mech Eng Part D J Automob Eng2014; 228: 1217–1231.
18.
SyedFUKuangMLYingH. Active damping wheel-torque control system to reduce driveline oscillations in a power-split hybrid electric vehicle. IEEE Trans Veh Technol2009; 58: 4769–4785.
19.
WangCZhaoZZhangT, et al.Mode transition coordinated control for a compound power-split hybrid car. Mech Syst Signal Process2017; 87: 192–205.
20.
GaoBChenH. Model-based control of automotive step-ratio transmissions. Int J Powertrains2014; 3: 197.
21.
GoggiaTSorniottiADe NovellisL, et al.Integral sliding mode for the yaw moment control of four-wheel-drive fully electric vehicles with in-wheel motors. Int J Powertrains2015; 4: 388.
22.
HallMDourraH. Dynamic analysis of transmission torque utilizing the lever analogy, Pennsylvania: SAE International, 2009, pp. 1–6.
23.
MohammadpourMTheodossiadesSRahnejatH. Dynamics and efficiency of planetary gear sets for hybrid powertrains. Proc IMechE, Part C: J Mechanical Engineering Science2016; 230: 1359–1368.
24.
GkinisTRahmaniRRahnejatH. Effect of clutch lining frictional characteristics on take-up judder. Proc IMechE, Part K: J Multi-body Dynamics2017; 231: 493–503.
25.
KelesOErcanY. Theoretical and experimental investigation of a pulse-width modulated digital hydraulic position control system. Control Eng Pract2002; 10: 645–654.
26.
SwaroopDHedrickJKYipPP, et al.Dynamic surface control for a class of nonlinear systems. IEEE Trans Automat Contr2000; 45: 1893–1899.
27.
Haj-FrajAPfeifferF. Optimal control of gear shift operations in automatic transmissions. J Franklin Inst2001; 338: 371–390.
28.
ZhouBZhangJGaoJ, et al.Clutch pressure estimation for a power-split hybrid transmission using nonlinear robust observer. Mech Syst Signal Process2018; 106: 249–264.
