The paper describes a combined tribodynamics analysis (dynamics and contact tribology) of cylindrical roller bearings of a heavy duty truck transmission under high applied loads. The dynamic analysis provides the transient variations in contact load. It also determines the vibration spectrum of the bearing as well as that of contact dynamics. It is shown that with sufficient preloading and/or interference fitting a widely spread loaded region results, which reduces bearing-induced vibration. The transient tribological analysis, including thermal analysis with a novel and realistic lubricant inlet boundary condition demonstrates that non-Newtonian mixed elastohydrodynamic regime of lubrication is prevalent, but with reduced friction compared with unrealistic dry Coulombic friction, which is often assumed in literature.
HarrisTA. Rolling bearing analysis, 3rd ed. New York: John Wiley and Sons, 1984.
2.
KannelJWTevaarwerkJL. Subsurface stress evaluations under rolling/sliding contacts. Trans ASME J Tribol1984; 106(1): 96–103.
3.
Johns-Rahnejat PM and Gohar R. Point contact elastohydrodynamic pressure distribution and sub-surface stress field. In: Tri-Annual conference on multi-body dynamics: Monitoring and simulations techniques, Bradford, 1997.
4.
KimSMLeeSK. Prediction of thermo-elastic behavior in a spindle–bearing system considering bearing surroundings. Int J Mach Tool Manuf2001; 41(6): 809–831.
5.
WardleFP. Vibration forces produced by waviness of the rolling surfaces of thrust loaded ball bearings, Part 2: Experimental validation. Proc IMechE, Part C: J Mechanical Engineering Science1988; 202(5): 313–319.
6.
LynaghNRahnejatHEbrahimiM. Bearing induced vibration in precision high speed routing spindles. Int J Mach Tools Manuf2000; 40(4): 561–577.
7.
PatelUAUpadhyaySH. Theoretical model to predict the effect of localized defect on dynamic behavior of cylindrical roller bearing at inner race and outer race. Proc IMechE, Part K: J Multi-body Dynamics2014. DOI: 10.1177/1464419313519612.
8.
KushwahaMRahnejatH. Transient concentrated finite line roller-to-race contact under combined entraining, tilting and squeeze film motions. J Phys Part D: Appl Phys2004; 37(14): 2018–2018.
9.
RahnejatHRothbergS. Multi-body dynamics: Monitoring and simulation techniques III, New York: Wiley, 2004.
10.
VafaeiSRahnejatH. Indicated repeatable runout with wavelet decomposition (IRR-WD) for effective determination of bearing-induced vibration. J Sound Vib2003; 260(1): 67–82.
11.
MeyerLDAhlgrenFFWeichbrodtB. An analytic model for ball bearing vibration to predict vibration response to distributed defects. Trans ASME J Mech Des1980; 102(2): 205–210.
12.
SunnersjöCS. Varying compliance vibrations of rolling bearings. J Sound Vib1978; 58(3): 363–373.
13.
MatsubaraMRahnejatHGoharR. Computational modelling of precision spindles supported by ball bearings. Int J Mach Tools Manuf1988; 28(4): 429–442.
DareingDWJohnsonKL. Fluid film damping of rolling contact vibrations. Proc IMechE, Part C: J Mechanical Engineering Science1975; 17(4): 214–218.
16.
MehdigoliHRahnejatHGoharR. Vibration response of wavy surfaced disc in elastohydrodynamic rolling contact. Wear1990; 139(1): 1–15.
17.
RahnejatHGoharR. The vibrations of radial ball bearings. Proc IMechE, Part C: J Mechanical Engineering Science1985; 199(3): 181–193.
18.
AiniRRahnejatHGoharR. A five degrees of freedom analysis of vibrations in precision spindles. Int J Mach Tools Manuf1990; 30(1): 1–18.
19.
LiuXYangP. On the thermal elastohydrodynamic lubrication of tilting roller pairs. Tribol Int2013; 65: 346–353.
20.
NajjariMGuilbaultR. Edge contact effect on thermal elastohydrodynamic lubrication of finite contact lines. Tribol Int2014; 71: 50–61.
21.
KushwahaMRahnejatHGoharR. Aligned and misaligned contacts of rollers to races in elastohydrodynamic finite line conjunctions. Proc IMechE, Part C: J Mechanical Engineering Science2002; 216(11): 1051–1070.
22.
TipeiN. Boundary conditions of a viscous flow between surfaces with rolling and sliding motion. Trans ASME J Lubr Technol1968; 90(1)
23.
MohammadpourMJohns-RahnejatPMRahnejatH. Boundary conditions for elastohydrodynamics of circular point contacts. Tribol Lett2014; 53(1): 107–118.
24.
GoharRRahnejatH. Fundamentals of tribology, London: Imperial College Press, 2008.
25.
GaoYLiZWangJ. Influences of bearing housing deflection on vibration performance of cylinder roller bearing–rotor system. Proc IMechE, Part K: J Multi-body Dynamics2013; 227(2): 106–114.
26.
Johns PM. The design of cylindrical rollers for use in shaft and bearing systems. MSc Thesis, Imperial College of Science and Technology, London, 1978.
27.
Roelands CJA. Correlation aspects of viscosity–temperature–pressure relationship of lubricating oils. PhD Thesis, Delft University of Technology, Delft, The Netherlands, 1966.
HamrockBJDowsonD. Isothermal elastohydrodynamic lubrication of point contacts, Part I – Theoretical formulation. Trans ASME J Lubr Technol1976; 98: 223–229.
30.
TipeiN. Boundary conditions of a viscous flow between surfaces with rolling and sliding motion. Trans ASME J Lubr Technol1968; 90(1)
31.
BirkhoffGHaysD. Free boundaries in partial lubrication. J Math Phys1963; 42(2)
32.
GreenwoodJATrippJH. The contact of two nominally flat rough surfaces. Proc Instn Mech Engrs1970–1971; 185: 625–633.
33.
MohammadpourMTheodossiadesSRahnejatH. Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at high loads. Meccanica2014; 49(5): 1115–1138.
34.
JohnsonKLCameronR. Shear behaviour of elastohydrodynamic oil films at high rolling contact pressures. Proc IMechE, Part C: J Mechanical Engineering Science1967; 182(1): 307–330.
35.
LiuFYangPJinZM. The response of thermal Newtonian and non-Newtonian EHL to the vertical vibration of a roller. Tribol Ser2003; 43: 179–187.
