Improving the thermal performance of windows is important for building energy efficiency. Filling windows with variable transparency shape-stabilized phase change materials (VTSS-PCM) improves the thermal inertia of windows while avoiding the leakage of PCM. In this paper, a new type of VTSS-PCM window was proposed, tested, simulated and optimized in hot summer and cold winter climate zone. A numerical model of the VTSS-PCM window was built, and the model was validated using experimental tests. On this basis, three key parameters of VTSS-PCM were investigated and optimized. Finally, the energy and economic performance of the optimized VTSS-PCM window were compared with a typical hollow glass window. The results showed that the total annual unfavourable heat transfer (TAHT) and the annual investment cost (AIC) of the VTSS-PCM window obtained from the optimization were 118.16 kWh/m2 and 8.53 CNY/m2, respectively. Compared with the hollow glass window, the VTSS-PCM window reduced the TAHT by 30.14% and the total annual cost by 28.39%. The VTSS-PCM window produced a better development potential in terms of energy performance and economic performance. This study provided a reference for the application of the VTSS-PCM window in hot summer and cold winter regions of China.
WangPCLiuZBZhangLWangZFanJH. Inversion of extinction coefficient and refractive index of variable transparency solid–solid phase change material based on a hybrid model under real climatic conditions. Appl Energy2023; 341: 121098.
2.
BamdadKCholetteMEOmraniSBellJ. Future energy-optimised buildings — Addressing the impact of climate change on buildings. Energy Build2021; 231: 110610.
3.
Rodríguez-MuñozNANájera-TrejoMAlarcón-HerreraOMartín-DomínguezIR. A building’s thermal assessment using dynamic simulation. Indoor Built Environ2018; 27(2): 173–183.
4.
UddinMMJiJWangCYZhangCY. Building energy conservation potentials of semi-transparent CdTe integrated photovoltaic window systems in Bangladesh context. Renew Energy2023; 207: 512–530.
5.
ChunSYParkSLeeSINguyenHDLeeK-KHongSHanC-HChoMChoiH-KKwakK. Operando Raman and UV-Vis spectroscopic investigation of the coloring and bleaching mechanism of self-powered photochromic devices for smart windows. Nano Energy2021; 82: 105721.
6.
Al-QahtaniSDBinyaseenAMAljuhaniEAljohaniMAlzahraniHKShahREl-MetwalyNM. Production of smart nanocomposite for glass coating toward photochromic and long-persistent photoluminescent smart windows. Ceram Int2022; 48: 903–912.
7.
WarwickMEARidleyIBinionsR. Thermochromic vanadium dioxide thin films prepared by electric field assisted atmospheric pressure chemical vapour deposition for intelligent glazing application and their energy demand reduction properties. Sol Energy Mater Sol Cells2016; 157: 686–694.
8.
SibilioSRosatoAScorpioMIulianoGCiampiGVanoliGPRossiF. A review of electrochromic windows for residential applications. Int J Heat Technol2016; 34(2): 481–488.
9.
LiYRShahKWLiWXXiongT. Experimental investigation on indoor thermal environment improvement and energy-saving of electrochromic window under Singapore's tropical climate. J Build Eng2023; 73: 106779.
10.
BaiTLiWZFuGXZhangQQZhouKLWangH. Dual-band electrochromic smart windows towards building energy conservation. Sol Energy Mater Sol Cells2023; 256: 112320.
11.
ChiJHLeiXYYuCWXuCW. Prospects and challenges of phase change materials (PCMs) integrated into building glazing systems. Indoor Built Environ2023; 32(9): 1747–1752.
12.
LiSHZhongKCZhouYYZhangXS. Comparative study on the dynamic heat transfer characteristics of PCM-filled glass window and hollow glass window. Energy Build2014; 85: 483–492.
13.
LiSHZouKKSunGFZhangXS. Simulation research on the dynamic thermal performance of a novel triple-glazed window filled with PCM. Sustain Cities Soc2018; 40: 266–273.
14.
WeiLYLiGJRuanS-TQiH. Dynamic coupled heat transfer and energy conservation performance of multilayer glazing window filled with phase change material in summer day. J Energy Storage2022; 49: 104183.
15.
KingMFLRaoPNSivakumarAMamidiVKRichardSVijayakumarMArunprasathKKumarPM. Thermal performance of a double-glazed window integrated with a phase change material (PCM). Mater Today-Proc2022; 50: 1516–1521.
16.
YangYYWuWDFuSYZhangH. Study of a novel ceramsite-based shape-stabilized composite phase change material (PCM) for energy conservation in buildings. Construct Build Mater2020; 246: 118479.
17.
KimTAhnSLeighS-B. Energy consumption analysis of a residential building with phase change materials under various cooling and heating conditions. Indoor Built Environ2014; 23(5): 730–741.
18.
WiSChangSJKimS. Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function. Sustain Cities Soc2020; 56: 102067.
19.
WangPCLiuZBXiSTZhangYCZhangL. Experiment and numerical simulation of an adaptive building roof combining variable transparency shape-stabilized PCM. Energy Build2022; 263: 112030.
20.
WangPCLiuZBZhangXYZhangHMChenXZhangL. Adaptive building roof combining variable transparency shape-stabilized phase change material: application potential and adaptability in different climate zones. Build Environ2022; 222: 109436.
21.
WangPCLiuZBWuJNLiaoHJJiangXYChenHL. Experimental and numerical study of adaptive ventilation and sunlight regulation building envelope combining variable transparency shape-stabilized phase change material. Build Environ2024; 248: 111095.
22.
WangPCLiuZBZhangLZhaoCLJiangXYLiBJ. Adaptive building envelope combining variable transparency shape-stabilized PCM and reflective film: parameter and energy performance optimization in different climate conditions. Energy Convers Manag2024; 299: 117907.
23.
ZhangXYLiuZBWangPCLiBJ. Performance evaluation of a novel rotatable dynamic window integrated with a phase change material and a vacuum layer. Energy Convers Manag2022; 272: 116333.
24.
SkartveitAOlsethJA. Modelling slope irradiance at high latitudes. Sol Energy. 1986; 36(4): 333–344.
25.
LuoYQZhangLWuJWangXLLiuZBWuZH. Modeling of solar transmission through multilayer glazing facade using shading blinds with arbitrary geometrical and surface optical properties. Energy2017; 128: 163–182.
26.
MalekiAAskarzadehA. Optimal sizing of a PV/wind/diesel system with battery storage for electrification to an off-grid remote region: a case study of Rafsanjan, Iran. Sustain Energy Technol Assessments2014; 7: 147–153.
27.
LiJZhangYDingPLongE. Experimental and simulated optimization study on dynamic heat discharge performance of multi-units water tank with PCM. Indoor Built Environ2021; 30(9): 1531–1545.
28.
YuFLengJW. Quantitative effects of glass roof system parameters on energy and daylighting performances: a bi-objective optimal design using response surface methodology. Indoor Built Environ2021; 30(8): 1268–1285.
