Leakage of hazardous chemical gases during storage or transport via roadways is a common type of accident that threatens human life. This study built a typical residential building model in rural areas of southern China based on Building Information Model technology. The model was then simplified and employed as a target building to simulate the hazardous gas dispersion around it after a leak accident by means of Computational Fluid Dynamic methods. A dose-response model was combined with a probit function analysis to quantitatively identify the exposure risks for different scenarios. The impacts of source location and ventilation path on the dispersion characteristics were analyzed through comparisons of indoor concentration distributions. In addition, the study also quantified the relationship between individual mortality risk and the source intensity by employing H2S as a source of toxic substances. If the source strength was increased by 2.5 times for the same ventilation path, the corresponding mortality rates can improve from 0.1 to 99%. The findings provide effective information about rapid consequence evaluation after accidental leakage of hazardous chemical gas and could be helpful in proposing effective emergency measures to minimize the exposure risk in roadside buildings.
KawprasertABarkanCPL. Communication and interpretation of results of route risk analyses of Hazardous materials transportation by railroad. Transport Res Rec2009; 2097: 125–135.
McCabeLCClaytonGD. Air pollutant by Hydrogen Sulfide in Poza Rica, Mexico. An evaluation of the incident of Nov. 24 1950. Arch Indust Hyg Occup Med1952; 6(3): 199–213.
4.
ZhangJLeiDFengW. Analysis of chemical disasters caused by release of hydrogen sulfide-bearing natural gas. Proced Eng2011; 26: 1878–1890.
5.
ZhangJLeiDFengW. An approach for estimating toxic releases of H2S-containing natural gas. J Hazard Mater2014; 264: 350–362.
6.
ZhangLRuanZ. Statistical analysis and fire control counter measures of 100 dangerous chemical leakage accidents. Fire Science Technology2014; 33(03): 337–339. (In Chinese).
7.
ZhangYWangLLiATaoP. Performance evaluation by computational fluid dynamics modelling of the heavy gas dispersion with a low Froude number in a built environment. Indoor Built Environ2020; 29(5): 656–670.
8.
NiuJTungTCW. On-site quantification of re-entry ratio of ventilation exhausts in multi-family residential buildings and implications. Indoor Air2008; 18(1): 12–26.
9.
CaoSJMeyersJ. Fast prediction of indoor pollutant dispersion based on reduced-order ventilation models. Build Simul2015; 8(4): 415–420.
10.
TominagaYBlockenB. Wind tunnel experiments on cross-ventilation flow of a generic building with contaminant dispersion in unsheltered and sheltered conditions. Build Environ2015; 92: 452–461.
11.
YuYKwokKCSLiuXZhangY. Air pollutant dispersion around high-rise buildings under different angles of wind incidence. J Wind Eng Ind Aerodyn2017; 167: 51–61.
12.
LiuXLvXPengZShiC. Experimental study of airflow and pollutant dispersion in cross-ventilated multi-room buildings: effects of source location and ventilation path. Sust Cities Soc2020; 52: 101822.
13.
CuiDAiZMakCMKwokKXueP. The influence of envelope features on interunit dispersion around a naturally ventilated multi-story building. Build Simul2018; 11(6): 1245–1253.
14.
CaoSJ. Challenges of using CFD simulation for the design and online control of ventilation systems. Indoor Built Environ2019; 28(1): 3–6.
15.
LeeKYMakCM. Effects of different wind directions on ventilation of surrounding areas of two generic building configurations in Hong Kong. Indoor Built Environ2021; 31(2): 414–434.
16.
ChaloulakouAMavroidisI. Comparison of indoor and outdoor concentrations of CO at a public school. Evaluation of an indoor air quality model. Atmos Environ2002; 36(11): 1769–1781.
17.
TongZChenYMalkawiAAdamkiewiczGSpenglerJD. Quantifying the impact of traffic-related air pollution on the indoor air quality of a naturally ventilated building. Environ Int2016; 89: 138–146.
18.
ŚciborMBalcerzakBGalbarczykATargoszNJasienskaG. Are we safe inside? Indoor air quality in relation to outdoor concentration of PM10 and PM2.5 and to characteristics of homes. Sust Cities Soc2019; 48: 101537.
19.
MeiSJYuanC. Urban buoyancy-driven air flow and modelling method: a critical review. Build Environ2021; 210: 108708.
20.
JinRHangJLiuSWeiJLiuYXieJSandbergM. Numerical investigation of wind-driven natural ventilation performance in a multi-storey hospital by coupling indoor and outdoor airflow. Indoor Built Environ2016; 25(8): 1226–1247.
21.
QianHLiYSetoWHChingPChingWHSunH. Natural ventilation for reducing airborne infection in hospitals. Build Environ2010; 45(3): 559–565.
22.
PontiggiaMDerudiMAlbaMScaioniMRotaR. Hazardous gas releases in urban areas: assessment of consequences through CFD modelling. J Hazard Mater2010; 176(1–3): 589–596.
23.
ZhangBChenGM. Quantitative risk analysis of toxic gas release caused poisoning-a CFD and dose-response model combined approach. Process Saf Environ Protect2010; 88(4): 253–262.
24.
LiuXPNiuJLKwokKCSWangJLiB. Local characteristics of cross-unit contamination around high-rise building due to wind effect: mean concentration and infection risk assessment. J Hazard Mater2011; 192(1): 160–167.
25.
WangJYuXZongR. A dynamic approach for evaluating the consequences of toxic gas dispersion in the chemical plants using CFD and evacuation modelling. J Loss Prev Process Ind2020; 65: 104156.
26.
YangDChenGShiJZhuYDaiZ. A novel approach for hazardous area identification of toxic gas leakage accidents on offshore facilities. Ocean Eng2020; 217: 107926.
27.
WangJHuangJFengZCaoSJHaghighatF. Occupant-density-detection based energy efficient ventilation system: Prevention of infection transmission. Energy Build2021; 240: 110883.
28.
AbbassiRDadashzadehMKhanFHawboldtK. Risk-based prioritisation of indoor air pollution monitoring using computational fluid dynamics. Indoor Built Environ2012; 21(5): 663–673.
29.
ArgyropoulosCDAshrafAMMarkatosNCKakosimosKE. Mathematical modelling and computer simulation of toxic gas building infiltration. Process Saf Environ Protect2017; 111: 687–700.
30.
Regulations of the highway law of the people’s Republic of China on highway safety protection. Beijing, China: General Office of the State Council, 2011. (In Chinese).
31.
KaravaPStathopoulosTAthienitisAK. Airflow assessment in cross-ventilated buildings with operable façade elements. Build Environ2011; 46: 266–279.
32.
RamponiRBlockenB. CFD simulation of cross-ventilation flow for different isolated building configurations: validation with wind tunnel measurements and analysis of physical and numerical diffusion effects. J Wind Eng Ind Aerodyn2014; 104: 408–418.
33.
FrankeJHellstenASchlünzenHCarissimoB. Best practice guideline for the CFD simulation of flows in the urban environment. In: 11th Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, Cambridge, UK, July 2007. Cambridge Environmental Research Consultants, 2007.
34.
TominagaYMochidaAYoshieRKataokaHNozuTYoshikawaMShirasawaT. AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. J Wind Eng Ind Aerodyn2008; 96: 1749–1761.
35.
RamponiRBlockenB. CFD simulation of cross-ventilation for a generic isolated building: impact of computational parameters. Build Environ2012; 53: 34–48.
36.
SpaldingDB. Concentration fluctuations in a round turbulent free jet. Chem Eng Sci1971; 26(1): 95–107.
37.
EastmanC. An outline of the building description system. Research Report No. 50. Pittsburgh: Carnegie-Mellon UniversityInstitute of Physical Planning, 1974.
38.
VDI 2440: 2000. Emission control - Mineral oil refineries. Berlin: VDI, 2000.
39.
Yet-PoleIGuSGGuptaJP. A preliminary explore to the forced ventilation on the toxic gas release/dispersion and the hazard mitigation within a petrochemical plant. J Loss Prev Process Ind2021; 69: 104341.
40.
Vı́lchezJAMontielHCasalJArnaldosJ. Analytical expressions for the calculation of damage percentage using the probit methodology. J Loss Prev Process Ind2001; 14(3): 193–197.
41.
National Research Council, & Committee on Acute Exposure Guideline Levels. Acute Exposure guideline levels for selected airborne chemicals, Vol. 9. Washington, DC: The National Academies Press, 2009.
42.
LiXYangJSunW. Strategy to optimise building ventilation to aid rescue of hostages held by terrorists. Indoor Built Environ2005; 14(1): 39–50.
43.
LiuJLNiuJL. CFD simulation of the wind environment around an isolated highrise building: an evaluation of SRANS, LES and DES models. Build Environ2016; 96: 91–106.
44.
MenterFR. Zonal two equation k-cl, Turbulence models for Aerodynamic flows. In: 23th Fluid Dynamics, Plasmadynamics, and Lasers Conference, Orlando, Florida, 6 – 9 July 1993: 2906.
45.
ChenQ. Ventilation performance prediction for buildings: a method overview and recent applications. Build Environ2009; 44(4): 848–858.
