Radiant system has been increasingly applied in buildings due to its good thermal comfort and energy-saving potential. In this research, a simplified predicted mean vote (PMV) model and sensible cooling load equation were proposed based on human thermal comfort. Simulations were carried out using Airpak to explore relationships among thermal comfort characteristics, design and operation parameters. Results show that radiant surface temperature, fresh-air supply temperature and the area ratio are correlated approximately linearly with the indoor air temperature, while the relative humidity has little effect on the indoor air temperature. The indoor air velocity in the simulated environment was no more than 0.15 m/s, satisfying the requirements of limit values in the occupied zone. The results indicate that the optimum radiant surface temperature (tc) is 19°C to 23°C when fresh-air supply temperature (ts) is 26°C. The relative humidity (φ) should be maintained at 50% to 70%, and the area ratio of radiant panels to total surfaces (k1) should be kept within 0.15 to 0.38 when the radiant surface temperature is 20°C and the fresh-air supply temperature is 26°C. The simplified PMV model and the sensible load equation can provide reference for panel design based on characteristics of radiant cooling panels with a dedicated fresh-air system.
ZhouY Yu CW.The year-round thermal performance of a new ventilated Trombe wall integrated with phase change materials in the hot summer and cold winter region of China. Indoor Built Environ2019;
28: 195–216.
2.
KimJTYuC.Sustainable development and requirements for energy efficiency in buildings – the Korean perspectives. Indoor Built Environ2018;
27: 734–751.
3.
ZhaoMKangWBLuoXLYuCWMengXZGuZL.Performance comparison of capillary mat radiant and floor radiant heating systems assisted by an air source heat pump in a residential building. Indoor Built Environ2017;
26: 1292–1304.
4.
XingLHu PF. Simulation of hybrid GSHP systems utilizing radiant ceiling terminal and system evaluation with analytic hierarchy process method. Indoor Built Environ. Epub ahead of print 8 January 2020. DOI: 10.1177/1420326X19898235.
5.
CatalinaT.Radiant cooling ceiling thermal performance analysis using dynamic simulations and full-scale experimental campaigns. Math Model Civil Eng2013;
8: 279–286.
6.
NingBSChenYMLiuHZhangSB.Cooling capacity improvement for a radiant ceiling panel with uniform surface temperature distribution. Build Environ2016;
102: 64–72.
7.
SimonJRPhilipH.An experimental study of airflow and temperature distribution in a room with displacement ventilation and a chilled ceiling. Build Environ2013;
59: 358–368.
8.
ChiangWHWangCYHuangJS.Evaluation of cooling ceiling and mechanical ventilation systems on thermal comfort using CFD study in an office for subtropical region. Build Environ2012;
48: 113–127.
9.
QinSYWangYAGaoSXuDGCuiXZhaoMLinWJ.Heat transfer characteristics of a composite radiant wall under cooling/heating conditions. Indoor Built Environ. Epub ahead of print 24 September 2019. DOI:10.1177/1420326X1987667.
10.
Rabanillo-HerreroMPadilla-MarcosMAFeijo-MunozJMeissA.Effects of the radiant heating system location on both the airflow and ventilation efficiency in a room. Indoor Built Environ2019;
28: 372–383.
11.
LiuJYLiZZKimMKZhuSWZhangLHSrebricJ.A comparison of the thermal comfort performances of a radiation floor cooling system when combined with a range of ventilation systems. Indoor Built Environ2019;
29: 527–542.
12.
FangerPO.Thermal environment – human requirements. Environmentalist1986;
6: 275–278.
13.
GaoSLiYWangYAMengXZZhangLYYangCJinLW.A human thermal balance based evaluation of thermal comfort subject to radiant cooling system and sedentary status. Appl Therm Eng2017;
122: 461–472.
14.
KaracavusBAydinK.Numerical investigation of general and local thermal comfort of an office equipped with radiant panels. Indoor Built Environ2019;
28: 806–824.
15.
ISO EN7730:2005. Ergonomics of the thermal environment e analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria.
16.
XieDWangCHYuCW WYWangHQ.Performance of capillary ceiling cooling panel on ceiling surface temperature and indoor thermal environment. Indoor Built Environ2020;
29: 881–894.
17.
CatalinaTVirgoneJKuznikF.Evaluation of thermal comfort using combined CFD and experimentation study in a test room equipped with a cooling ceiling. Build Environ2009;
44: 1740–1750.
18.
FröhlichDGangwischMMatzarakisA.Effect of radiation and wind on thermal comfort in urban environments – application of the RayMan and SkyHelios model. Urban Climate2019;
27: 1–7.
19.
LinBRWangZSunHLZhuYXOuyangQ.Evaluation and comparison of thermal comfort of convective and radiant heating terminals in office buildings. Build Environ2016;
106: 91–102.
20.
CenCJiaYHLiuKXGengRX.Experimental comparison of thermal comfort during cooling with a fan coil system and radiant floor system at varying space heights. Build Environ2018;
141: 71–79.
21.
GaoJWangHCWuXZWangFHTianZ.Indoor air distribution in a room with underfloor air distribution and chilled ceiling: effect of ceiling surface temperature and supply air velocity. Indoor Built Environ2019;
29: 151–162.
22.
LuXYLiuHWuYX.Acceptable surface temperature of floor radiant heating system based on thermal comfort study in southern china. Environ Sci2019;
80: 1–7.
23.
SuiXMZhangX.Analysis on combinations of indoor thermal microclimate parameters in radiant cooled residential buildings and drawing of new thermal comfort charts. Build Serv Eng Res T2016;
37: 66–84.
24.
MustakallioPBolashikovZRezgalsLLipczynskaAMelikovAKosonenR.Thermal environment in a simulated double office room with convective and radiant cooling systems. Build Environ2017;
123: 88–100.
25.
MustakallioPBolashikovZKostovKMelikovAKosonenR.Thermal environment in simulated offices with convective and radiant cooling systems under cooling (summer) mode of operation. Build Environ2016;
100: 82–91.
26.
FabrizioECorgnatiSP, Causone F and FilippiM. Numerical comparison between energy and comfort performances of radiant heating and cooling systems versus air systems. HVAC & R Res2012;
18: 692–708.
27.
DesentisEH.Experiences on radiant cooling technology in Latin America country – Mexico. ASHRAE Trans2014;
120: 1–7.
NaganoKMochidaT.Experiments on thermal environmental design of ceiling radiant cooling for supine human subjects. Build Environ2004;
39: 267–275.
30.
GaoNPNiuJL.CFD study of the thermal environment around a human body: a review. Indoor Built Environ2005;
14: 5–16.
31.
MelikovAKKrejciríkováBDuszykMKaczmarczykJSakoiT.Human response to local convective and radiant cooling in a warm environment. HVAC & R Res2013;
19: 1023–1032.
32.
ShinMSRheeKNParkSHYeoMSKimKW.Enhancement of cooling capacity through open – type installation of cooling radiant ceiling panel systems. Build Environ2019;
148: 417–432.
33.
HuangJHXuWL.A new practical unit for the assessment of the heat exchange of human body with the environment. J Therm Biol2006;
31: 318–322.
34.
CausoneFCorgnatiSPFilippiMOlesenBW.Experimental evaluation of heat transfer coefficients between radiant ceiling and room. Energy Build2009;
41: 622–628.
35.
YangLYeMHeBJ.CFD simulation research on residential indoor air quality. Sci Total Environ2014;
472: 1137–1144.
36.
XieDWangYWangHQMoSQLiaoML.Numerical analysis of temperature non-uniformity and cooling capacity for capillary ceiling radiant cooling panel. Renew Energ2016;
87: 1154–1161.
37.
XieDTianLYuCWLiaoMLWangHQ.Indoor thermal environment due to non-steady-state radiation heat transfer of a capillary ceiling radiation cooling system. Indoor Built Environ2018;
4: 443–453.
38.
HolsteinAJBohnhoffDRChoiCY.A computational and experimental study of conjugate heat transfer through composite thermal envelopes in post-frame buildings. Comput Electron Agr2018;
149: 139–149.
39.
LiZChenJBWangFCuiLCQuML.A simulation study for evaluating the performances of different types of house – hold radiant air conditioning systems. Appl Therm Eng2018;
131: 553–564.
40.
HuangCCaiNShenN. Discussion on indoor design parameters of air-conditioning in the large space building with considering comfort and energy consumption based on nomograms. In: Li A, Zhu Y and Li Y (eds) Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning. Vol. 261. Berlin, Heidelberg: Springer, 2014, pp.185–192.
41.
WanJWYangKZhangWJZhangJL.A new method of determination of indoor temperature and relative humidity with consideration of human thermal comfort. Build Environ2009;
44: 411–417.
42.
ParkDYChangS.Numerical analysis to determine the performance of combined variable ceiling and floor-based air distribution systems in an office room. Indoor Built Environ2013;
23: 971–987.
43.
RbMZhaoL.Laboratory evaluation and modeling of electrostatic precipitation of PM emissions from poultry buildings. ASHRAE Trans2009;
115: 831–849.
44.
VogeleerGDPietersJGOverbekePVDemeyerP.Effect of sampling density on the reliability of airflow rate measurements in a naturally ventilated animal mock-up building. Energ Build2017;
152: 313–322.
45.
EN 15251:2007. Criteria for the indoor environment including thermal, indoor air quality, light and noise.
Brussels:
European Committee for Standardization, Inc., 2007.
46.
ZhaoWXKilpeläinenSKosonenRJokisaloJ.Experimental comparison of local low velocity unit combined with radiant panel and diffuse ceiling ventilation systems. Indoor Built Environ2020;
29: 895–914.
47.
ShenLMTuZLHuQTaoCChenHX.The optimization design and parametric study of thermoelectric radiant cooling and heating panel. Appl Therm Eng2017;
112: 688–697.
