Indoor air quality (IAQ) is a key factor that could affect the indoor environment and people's health. In this study, we report a comprehensive study on IAQ in 30 dwellings in the temperate zone in China. Thirty naturally ventilated dwellings were selected in the urban area of Kunming, which is the largest city in temperate zone in China. In four seasons, short-term measurement of formaldehyde and benzene, toluene, xylenes-volatile organic compounds and air infiltration rate were conducted in these dwellings. A long-term 1-year monitoring of temperature, relative humidity, fine particulate matter (PM2.5), carbon dioxide (CO2), window-opening behaviour and night-time air change rate (ACR) were conducted in 13 of these dwellings by remote sensors. Short-term measurements showed the mean formaldehyde concentration in summer (100.76 μg/m3), benzene concentration in winter (8.46 µg/m3), PM2.5 concentration (80.4 µg/m3) in spring of 2017 exceeded the Chinese standard, the US Office of Environmental Health Hazard Assessment value and the World Health Organization guidelines. The night-time ACR was the highest in summer (2.1 h−1) and the lowest in winter (1.6 h−1) in bedrooms of 13 long-term monitored dwellings due to seasonal time variation in window opening in bedrooms, which was mainly driven by CO2 concentration, indoor temperature and outdoor PM10 concentration.
SundellJ.
On the history of indoor air quality and health. Indoor Air2004;
14: 51–58.
2.
BoldenALKwiatkowskiCFColbornT.
New look at BTEX: are ambient levels a problem?Environ Sci Technol2015;
49: 5261–5276.
3.
ChenZHWuYFWangPLWuYPLiZYZhaoYZhouJSZhuCCaoCMaoYYXuFWangBBCormierSAYingSMLiWShenHH.
Autophagy is essential for ultrafine particle-induced inflammation and mucus hyperproduction in airway epithelium. Autophagy2016;
12: 297–311.
4.
KotolMRodeCClausenGNielsenTR.
Indoor environment in bedrooms in 79 Greenlandic households. Build Environ2014;
81: 29–36.
5.
YeWZhangXGaoJCaoGZhouXSuX.
Indoor air pollutants, ventilation rate determinants and potential control strategies in Chinese dwellings: a literature review. Sci Total Environ2017;
586: 696–729.
6.
GB 50176-2016. Thermal design code for civil building.
Beijing:
China Architecture and Building Press, 2016.
7.
ShaoZBiJMaZWangJ.
Seasonal trends of indoor fine particulate matter and its determinants in urban residences in Nanjing, China. Build Environ2017;
125: 319–325.
8.
YoshinoHYoshinoYZhangQMochidaALiNLiZMiyasakaH.
Indoor thermal environment and energy saving for urban residential buildings in China. Energ Buildings2006;
38: 1308–1319.
9.
HeJGongSYuYYuLWuLMaoHSongCZhaoSLiuHLiXLiR.
Air pollution characteristics and their relation to meteorological conditions during 2014–2015 in major Chinese cities. Environ Pollut2017;
223: 484–496.
10.
FangMChanCKYaoX.
Managing air quality in a rapidly developing nation: China. Atmos Environ2009;
43: 79–86.
11.
HuangSWeiWWeschlerLBSalthammerTKanHBuZZhangY.
Indoor formaldehyde concentrations in urban China: preliminary study of some important influencing factors. Sci Total Environ2017;
590–591: 394–405.
12.
LeeSCLiWMAoCH.
Investigation of indoor air quality at residential homes in Hong Kong - case study. Atmos Environ2002;
36: 225–237.
13.
OhuraTAmagaiTShenXLiSZhangPZhuL.
Comparative study on indoor air quality in Japan and China: characteristics of residential indoor and outdoor VOCs. Atmos Environ2009;
43: 6352–6359.
14.
HanBBaiZLiuYYouYXuJZhouJZhangJNiuCZhangNHeFDingX.
Characterizations, relationship, and potential sources of outdoor and indoor particulate matter bound polycyclic aromatic hydrocarbons (PAHs) in a community of Tianjin, Northern China. Indoor Air2015;
25: 320–328.
15.
HuangSXiongJCaiCXuWZhangY.
Influence of humidity on the initial emittable concentration of formaldehyde and hexaldehyde in building materials: experimental observation and correlation. Sci Rep2016;
6: 23388.
16.
DengQYangXZhangJ.
Study on a new correlation between diffusion coefficient and temperature in porous building materials. Atmos Environ2009;
43: 2080–2083.
17.
TongZChenYMalkawiALiuZFreemanRB.
Energy saving potential of natural ventilation in China: the impact of ambient air pollution. Appl Energy2016;
179: 660–668.
18.
ToeDHCKubotaT.
Development of an adaptive thermal comfort equation for naturally ventilated buildings in hot–humid climates using ASHRAE RP-884 database. Front Archit Res2013;
2: 278–291.
19.
AndersenRFabiVToftumJCorgnatiSPOlesenBW.
Window opening behaviour modelled from measurements in Danish dwellings. Build Environ2013;
69: 101–113.
20.
FabiVAndersenRVCorgnatiSOlesenBW.
Occupants' window opening behaviour: a literature review of factors influencing occupant behaviour and models. Build Environ2012;
58: 188–198.
21.
CaoBLuoMLiMZhuY.
Too cold or too warm? A winter thermal comfort study in different climate zones in China. Energ Buildings2016;
133: 469–477.
22.
YinWZhangGYangWWangX.
Natural ventilation potential model considering solution multiplicity, window opening percentage, air velocity and humidity in China. Build Environ2010;
45: 338–344.
23.
MolloySBChengMGalballyIEKeywoodMDLawsonSJPowellJCGillettRDunneESelleckPW.
Indoor air quality in typical temperate zone Australian dwellings. Atmos Environ2012;
54: 400–407.
24.
BaezAPadillaHGarciaRTorresMDRosasIBelmontR.
Carbonyl levels in indoor and outdoor air in Mexico City and Xalapa. Sci Total Environ2003;
302: 211–226.
25.
Fernandez-AgueraJDominguez-AmarilloSSendraJJSuarezR.
An approach to modelling envelope airtightness in multi-family social housing in Mediterranean Europe based on the situation in Spain. Energ Build2016;
128: 236–253.
26.
OlsenELChenQY.
Energy consumption and comfort analysis for different low-energy cooling systems in a mild climate. Energ Build2003;
35: 561–571.
27.
PereiraPFRamosNMMAlmeidaRSimoesMLBarreiraE.
Occupant influence on residential ventilation patterns in mild climate conditions. Energy Procedia2017;
132: 837–842.
28.
PeiJJYinYHLiuJJ.
Long-term indoor gas pollutant monitor of new dormitories with natural ventilation. Energ Build2016;
129: 514–523.
ISO 16000-11:2006. Determination of the emission of volatile organic compounds from building products and furnishing — sampling, storage of samples and preparation of test specimens.
Geneva:
International Organization for Standardization, 2006.
31.
CuiSCohenMStabatPMarchioD.
CO2 tracer gas concentration decay method for measuring air change rate. Build Environ2015;
84: 162–169.
WideqvistUVeselyVJohanssonCPotterABrorström-LundénESjöbergKJonssonT.
Comparison of measurement methods for benzene and toluene. Atmos Environ2003;
37: 1963–1973.
34.
OuryBLhuillierFProtoisJCMoreleY.
Behavior of the GABIE, 3 M 3500, PerkinElmer Tenax TA, and RADIELLO 145 diffusive samplers exposed over a long time to a low concentration of VOCs. J Occup Environ Hyg2006;
3: 547–557.
35.
WHO. WHO air quality guidelines for particulate matter, ozone, nitrogen dioxide and sulfur dioxide.
Geneva:
WHO, 2006.
36.
GB 3095-2012. Ambient air quality standards (in Chinese).
Beijing:
The Standardization Administration of China, 2012.
37.
WHO. WHO guidelines for indoor air quality: selected pollutants.
Bonn:
WHO, 2009.
38.
OEHHA. OEHHA acute, 8-hour and chronic reference exposure level (REL) summary. California Office of Environmental Health Hazard Assessment (OEHHA), Sacramento, 2016.
39.
Collins JF. Benzene reference exposure levels – technical support document for the derivation of noncancer reference exposure levels. Appendix D1. California Office of Environmental Health Hazard Assessment (OEHHA), Sacramento, 2014. https://oehha.ca.gov/media/downloads/crnr/benzenerelsjune2014.pdf (accessed 7 May 2020).
BeköGLundTNorsFToftumJClausenG.
Ventilation rates in the bedrooms of 500 Danish children. Build Environ2010;
45: 2289–2295.
42.
QiMWLiXFWeschlerLBSundellJ.
CO2 generation rate in Chinese people. Indoor Air2014;
24: 559–566.
43.
ZhangNCaoBZhuY.
Effects of pre-sleep thermal environment on human thermal state and sleep quality. Build Environ2019;
148: 600–608.
44.
LanLTsuzukiKLiuYFLianZW.
Thermal environment and sleep quality: a review. Energ Build2017;
149: 101–113.
45.
ChengPLLiX.
Air infiltration rates in the bedrooms of 202 residences and estimated parametric infiltration rate distribution in Guangzhou, China. Energ Build2018;
164: 219–225.
46.
DaiXLiuJYinYSongXJiaS.
Modeling and controlling indoor formaldehyde concentrations in apartments: on-site investigation in all climate zones of China. Build Environ2018;
127: 98–106.
47.
GB 50736-2012. Design code for heating ventilation and air conditioning of civil buildings. Beijing: The Standardization Administration of China, 2012.
48.
CenterCMDS. Climate data for Kunming (1981–2010).
Beijing:
China Meteorological Data Service Center, 2012.
49.
XiaTChenC.
Differentiating between indoor exposure to PM2.5 of indoor and outdoor origin using time-resolved monitoring data. Build Environ2019;
147: 528–539.
50.
ZhouZHLiuYRYuanJJZuoJChenGYXuLYRameezdeenR.
Indoor PM2.5 concentrations in residential buildings during a severely polluted winter: a case study in Tianjin, China. Renew Sust Energy Rev2016;
64: 372–381.
51.
SekharSCGohSE.
Thermal comfort and IAQ characteristics of naturally/mechanically ventilated and air-conditioned bedrooms in a hot and humid climate. Build Environ2011;
46: 1905–1916.
52.
ANSI/ASHRAE Standard 55-2010. Thermal environmental conditions for human occupancy.
Atlanta, GA:
American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc., 2010.
53.
ShiSChenCZhaoB.
Air infiltration rate distributions of residences in Beijing. Build Environ2015;
92: 528–537.
54.
HuangSDXiongJYZhangYP.
Impact of temperature on the ratio of initial emittable concentration to total concentration for formaldehyde in building materials: theoretical correlation and validation. Environ Sci Technol2015;
49: 1537–1544.
55.
DuLBattermanSGodwinCChinJYParkerEBreenMBrakefieldWRobinsTLewisT.
Air change rates and interzonal flows in residences, and the need for multi-zone models for exposure and health analyses. Int J Environ Res Public Health2012;
9: 4639–4661.
